Enhance your shooting experience with the EGW S&W M&P SHIELD EZ Vortex Viper/Venom Sight Mount!
The EGW red dot sights are designed for easy installation from the left to the right, with the muzzle facing forward. The dovetail features a progressive taper, making the installation process smoother.
Installation Steps:
- Remove the rear sight from your firearm.
- Install the EGW Sight Mount in the dovetail.
- Tighten the set screw (if applicable).
- Place your red dot sight on the EGW Sight Mount. (For easier removal, place a small piece of paper between the red dot sight and the sight mount to keep Loctite off the sight.)
- Apply blue Loctite to the provided mounting screws.
- Torque the mounting screws to 15 in/lbs.
Included Hardware:
- 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
- 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws included with this mount require a 5/64'' allen wrench for installation. Please note that modification of your firearm may void the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury resulting from improper installation or use of this product.
Important: This mount does not work with M&P, M&P 2.0, or M&P 22 models.