Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

EGW
SIG SAUER P220 10MM HUNTER VORTEX VIPER/VENOM SIGHT MOUNT

841370115983 296000674
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
69.9 69.9 1 GBP
Product no.: 296000674
EGW SIG SAUER P220 10MM HUNTER VORTEX VIPER/VENOM SIGHT MOUNT
Mfr Part: 49328 841370115983 EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
69.9 GBP 0 £69.90 *
Notify on availability
Out of stock. No ETA.
Specs: Color: Black Make: Sig Sauer Material: Aluminum Model: P220 Super Match SAO, P220 10mm Hunter Number of Bases: 1-Piece Style: Tactical

Top takeaways

  1. The EGW sight mount is designed for easy installation from left to right, replacing the rear sight on SIG SAUER P220 10mm Hunter to mount Vortex Viper/Venom or similar red-dot sights.
  2. Mounting hardware is included and the mount allows for quick detachment to revert to the original rear sight; a 5/64'' allen wrench is required for the provided screws.
  3. Installation should be done by a qualified gunsmith to avoid damage or injury, and improper installation may void the firearm's manufacturer warranty.

Attributes

Colour: Black Make: Sig Sauer Material: Aluminum Model: P220 Super Match SAO,P220 10mm Hunter Number of Bases: 1-Piece Style: Tactical Delivery weight: 0.045kg

Item details

Made in USA



🎯 Enhance your SIG SAUER P220 10mm with the EGW Vortex Viper/Venom Sight Mount. Tactical aluminum build, easy install. Shop now for precision aiming! 🔫

EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation. Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.