Upgrade your Ruger Auto with the EGW Sight Mount for Vortex Viper/Venom.
EGW red dot sights are designed for easy installation from left to right (with the muzzle facing forward). The dovetail features a progressive taper, simplifying the installation process.
Installation Steps:
- Remove the rear sight from your firearm.
- Install the EGW Sight Mount in the dovetail.
- Tighten the set screw (if applicable).
- Place your red dot sight on the EGW Sight Mount. (For easier removal, place a small piece of paper between the red dot sight and the mount to keep Loctite off the sight.)
- Apply blue Loctite to the provided mounting screws.
- Torque the mounting screws to 15 in/lbs.
Included Hardware:
- 2 Button Head Cap Screws - for Vortex Viper and Venom Sights.
- 2 Flat Head Cap Screws - for Burris FastFire and Docter Sights.
The screws included with this mount require a 5/64'' allen wrench for installation. Please note that modification of your firearm may void the manufacturer's warranty.
This product should be installed and inspected by a qualified gunsmith. No liability is expressed or implied for damage or injury resulting from improper installation or use of this product.