Upgrade your firearm with precision and reliability!
The OVERSIZED NOVAK 0.007" VORTEX VIPER/VENOM SIGHT MOUNT by EGW is designed for those who demand the best in performance and fit. This mount is specifically crafted for Vortex Viper/Venom, Burris FastFire, and Docter red-dot sights.
Product Features:
- This mount is NOT a drop-in part and will require fitting.
- EGW red dot sights should be installed from left to right (with the muzzle facing forward).
- The dovetail features a progressive taper for easier installation.
- Simply remove the rear sight on your firearm and replace it with the EGW mount.
- Mounting hardware is included for your convenience.
Installation Instructions:
- Remove the rear sight*
- Install the EGW Sight Mount in the dovetail after checking for fit
- Tighten set screw (if applicable)
- Place the red dot sight on the EGW Sight Mount (using a small piece of paper between the sight and mount will aid in removal and keep Loctite off the sight).
- Apply blue Loctite to the provided mounting screws
- Torque mounting screws to 15 in/lbs
Included Hardware:
- 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
- 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights
The screws included with this mount require a 5/64'' allen wrench for installation. Please note that modification of your firearm may nullify the manufacturer's warranty.
This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Compatibility:
This mount fits firearms with oversized Novak cut dovetails. It is made .007" larger than a standard Novak cut and will require fitting.