Upgrade Your Shooting Experience with the EGW LPA Low Vortex Viper/Venom Sight Mount
The EGW LPA Low Vortex Viper/Venom Sight Mount is designed for seamless installation and enhanced performance, making it the perfect addition to your firearm.
Product Features:
- Compatible with Vortex Viper/Venom and Burris FastFire/Docter red-dot sights
- Easy installation from left to right with muzzle facing forward
- Progressive dovetail taper for effortless mounting
- Includes mounting hardware for quick setup
Installation Instructions:
- Remove the rear sight from your firearm.
- Install the EGW Sight Mount in the dovetail.
- Tighten the set screw (if applicable).
- Place the red dot sight on the EGW Sight Mount. (For easier removal, place a small piece of paper between the red dot sight and the sight mount to keep Loctite off the sight.)
- Apply blue Loctite to the provided mounting screws.
- Torque mounting screws to 15 in/lbs.
Included Hardware:
- 2 Button Head Cap Screws for Vortex Viper and Venom Sights
- 2 Flat Head Cap Screws for Burris FastFire and Docter Sights
Note: The screws included require a 5/64'' allen wrench for installation. Modification of your firearm may void the manufacturer's warranty. It is recommended that this product be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury resulting from improper installation or use of this product. This mount is not compatible with Rock Island 1911 or EAA/Tanfoglio Witness firearms that have LPA/Bomar style rear sights.