Enhance your shooting experience with the EGW Sight Mount for Vortex Viper/Venom.
The EGW Sight Mount is designed specifically for the CZ 75, 85, P-01, and PCR models, allowing you to easily install your Vortex Viper or Venom red dot sight. This mount is crafted for a seamless fit and straightforward installation.
Key Features:
- Designed for installation from left to right (muzzle facing forward).
- Progressive taper dovetail for easier installation.
- Includes all necessary mounting hardware.
- Compatible with Vortex Viper/Venom, Burris FastFire, and Docter red-dot sights.
Installation Instructions:
- Remove the rear sight from your firearm.
- Install the EGW Sight Mount in the dovetail.
- Tighten the set screw (if applicable).
- Place the red dot sight on the EGW Sight Mount. (Tip: use a small piece of paper between the sight and mount for easier removal and to keep Loctite off the sight.)
- Apply blue Loctite to the provided mounting screws.
- Torque mounting screws to 15 in/lbs.
Included Hardware:
- 2 Button Head Cap Screws for Vortex Viper and Venom Sights.
- 2 Flat Head Cap Screws for Burris FastFire and Docter Sights.
Note: The screws included with this mount require a 5/64'' allen wrench for installation.
Modification of your firearm may nullify the manufacturer's warranty. It is highly recommended that this product be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
This mount fits the following models:
- CZ 75
- CZ 75 SP-01
- CZ 75 SP-01 Phantom
- CZ 75 SP-01 Shadow*
- CZ 85
- CZ 97B
- CZ 97D
- CZ P-01
- CZ P-07 (may require fitting due to a variance in dovetail dimensions)
- CZ P-09 (may require fitting due to a variance in dovetail dimensions)
- CZ PCR (there will be a gap under the front of the adapter plate)
- Tristar P120