Your basket is empty.

Basket

01788 815115

Newsletter

METALFORM
COLT MUSTANG 380ACP MAGAZINES

620000026

Description
Ratings (10)

These magazines from Metal Form fit the Colt Mustang, but NOT the Mustang Plus 2. Made from brushed stainless steel, they come with and without a finger extension. Stainless Steel construction Five sight holes per side Stainless Steel follower Fits Colt Mustang only. Will not fit Sig P238 or others. Colt Mustang style magazine features a welded floorplate

SPECS: Fits Colt Mustang.

More...

Customer ratings for METALFORM .380 MUSTANG 7RD MAGAZINE W/ EXTENSION

Number of ratings: 10
From brownells.com: 10
Average rating: 4.3

(REVIEW).380 Mustang 7rd Magazine w/ Ext (27/07/2016)

This is the perfect addition to this weapon.

If you have big hands, the .380 Mustang leaves your baby finger hanging in mid air.

My 'feel' of a secure grip on the weapon is lacking with my baby finger just doing nothing.

The little grip extension and the added length of the magazine gives my baby finger something to do.

Completely transformed my opinion of this weapon.

I highly recommend this magazine, and have purchased more since my initial experience.

The price is very reasonable for a stainless steel magazine.

Not bad but could be better (11/02/2018)

This mag has a plus and a minus for me. Minus, I was hoping this extension would allow me to place 3 fingers on the grip but not quite. The pinky winds up on the point of the extension. The plus is that it provides plenty of room for a strong 2 finger grip and the pinky under the mag. Not too bad overall. The fit of the extension with the mag inserted, with mine at least, leaves a gap towards the rear. The front is snug but then it opens up. Aesthetics I guess.

Pretty Good (02/09/2012)

I ordered one of these to see how it compared to the Sig mag, and found it to be decent for range use so far. I ran roughly 50 rounds through it and only had one failure to feed. This is not necessarily the magazine, but I do not have that problem with either Sig mag I own. The bottom plate of this magazine is slightly longer than the factory mag, but I didn't even notice while shooting. All in all a decent magazine and I will definitely be ordering another 2 to use at the range.

Cheap but Quality! (07/02/2013)

I bought several of these because I wasn't paying $46 for a piece of aluminum stamped with Sig Sauer's name and it turned out to be a great choice. The follower is certainly different from the P238 one and I thought that would cause some issues but after firing a box of 50 through both magazines I have yet to have a failure.

When loading a fresh magazine, especially one with Critical Defense, you can't use the slide release. You've got to pull it back and let her rip or else you'll jam it up but that is truthfully the only issue I've encountered and it's not even a major one. I've added one of these to my EDC and the other is a spare/range mag. You can't go wrong.

Excellent magazine (13/03/2013)

Bought this and one of the extended for my Sig P238. The standard mag fits and functions perfectly but the extended will not fit. It is too short to engage the mag lock. I will be sending it back and ordering more of the standard 6 round mags as they are well designed and function perfectly.

Fit and function: Flawless in my P238 (09/06/2013)

After reading other reviews, I figured this would be a safe bet for fit in the P238, which it is. No issues with magazine loading, loading/fit in the pistol, chambering, locking or ejection. Magazine lock and release works fine. Another review mentioned the plate may be a bit longer than the factory mags. I haven't measured, but if there is a difference, it's negligible. I have no problems ordering more of these.

Good Magazine (28/09/2013)

Bought two for my Colt Mustang XSP and both worked perfect. Better quality than the two Colt magazines that came with gun.

Got a Colt? Get a Colt Mag! (27/12/2014)

I bought this Metalform .380 magazine, convinced by advertising they were interchangeable with Colt. Alas, that was not true in my experience. It didn't load well into the firearm and would not eject without a lot of coaxing. Loaded one up at the range and the thing would not feed right no matter what I tried. I tossed it into the range garbage can, drove home and ordered a Colt magazine. If it works for your situation, good. Mine didn't.

Good as Colt brand (03/06/2017)

I purchased 3 just to try out & I couldn't tell any difference in doing a blind test.....no malfunctions at all.

You need to load/unload 3-4X before you attempt to use them. Work the internal parts well. It frees them up & removes any burrs & such that'll cause a failure to load a round into the barrel.

All & all, I'm glad they ran out of Colt brand. I got more magazines for my money.......I reordered immediately after testing them this weekend....I ordered 8 more. Hopefully I didn't screw myself.......time & use will be the true test.

bought for colt mustang xsp (18/07/2017)

bought two of these mags for my colt mustang xsp and had no failures at all. the quatity of these mags is the same as the colt mag that came with the pistol. the colt replacement mags are $24.99 each. thanks

Read 10 more ratings on brownells.com

34.9 36.9 2 GBP

Product no.: 620000026
METALFORM .380 MUSTANG 7RD MAGAZINE W/ EXTENSION
Mfr Part: 380793E These magazines from Metal Form fit the Colt Mustang, but NOT the Mustang Plus 2. Made from brushed stainless steel, they come with and without a finger extension. Stainless Steel construction Five sight holes per side Stainless Steel follower Fits Colt Mustang only. Will not fit Sig P238 or others. Colt Mustang style magazine features a welded floorplate

36.9 GBP 0 £36.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Capacity: 7-Round Cartridge: 380 Auto (ACP) Finish: Silver Make: Colt Material: Stainless Steel Model: Mustang Quantity: 1

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

These Metalform magazines are designed specifically for the Colt Mustang and do not fit the Mustang Plus 2 or Sig P238 models.
Constructed from brushed stainless steel, the magazines have a 7-round capacity and feature a stainless steel follower and welded floorplate.
Available with or without a finger extension, the magazines also include five sight holes on each side for visual inspection.

Attributes

Capacity: 7-Round Cartridge: 380 Auto (ACP) Finish: Silver Make: Colt Material: Stainless Steel Model: Mustang Delivery weight: 0.068kg

Item details

Made in USA
US export classification: 0A501.x

Product no.: 620000022
METALFORM .380 MUSTANG 6RD MAGAZINE
Mfr Part: 380M793 These magazines from Metal Form fit the Colt Mustang, but NOT the Mustang Plus 2. Made from brushed stainless steel, they come with and without a finger extension. Stainless Steel construction Five sight holes per side Stainless Steel follower Fits Colt Mustang only. Will not fit Sig P238 or others. Colt Mustang style magazine features a welded floorplate

34.9 GBP 4 £34.90 *

Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse

Specs: Capacity: 6-Round Cartridge: 380 Auto (ACP) Finish: Silver Make: Colt Material: Stainless Steel Model: Mustang Quantity: 1

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

🔫 Reload with precision! Get the METALFORM 7-Rd Colt Mustang .380ACP Magazine with extension. Durable stainless steel, perfect fit for your Mustang. Shop now! ✨

Description
Ratings (10)

SPECS: Fits Colt Mustang.

More...

Customer ratings for METALFORM .380 MUSTANG 7RD MAGAZINE W/ EXTENSION

Number of ratings: 10
From brownells.com: 10
Average rating: 4.3

(REVIEW).380 Mustang 7rd Magazine w/ Ext (27/07/2016)

Not bad but could be better (11/02/2018)

Pretty Good (02/09/2012)

Cheap but Quality! (07/02/2013)

Excellent magazine (13/03/2013)

Fit and function: Flawless in my P238 (09/06/2013)

Good Magazine (28/09/2013)

Bought two for my Colt Mustang XSP and both worked perfect. Better quality than the two Colt magazines that came with gun.

Got a Colt? Get a Colt Mag! (27/12/2014)

Good as Colt brand (03/06/2017)

bought for colt mustang xsp (18/07/2017)

Read 10 more ratings on brownells.com

Customers also bought

CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER
COLT .380 ALUMINUM TRIGGER

CYLINDER & SLIDE

In stock

£47.90 *

Triggers

4.1

🔫 Enhance your Benelli M4/M1014 with the 8-Round Mesa Tactical Shell Holder! Rugged aluminum for quick reloads. Shop now for tactical edge! 🌟

MESA TACTICAL PRODUCTS PR 8-ROUND SHOTSHELL HOLDER FITS BENELLI M4/M1014
RECEIVER MOUNT SHOTSHELL HOLDER

MESA TACTICAL PRODUCTS

In stock

£179.90 * £99.90 - £179.90*

Shotgun Shell Holders

4.5

BROWNELLS SLIM GRIP SCREWS & BUSHINGS STAINLESS STEEL
SLIM GRIP SCREWS & BUSHINGS

BROWNELLS

In stock

£15.90 *

Grip Bushings

3.6

MEC-GAR RUGER P85/89/93/94/95/PC9 9MM 17RD MAGAZINE
RUGER® SEMI AUTO MAGAZINE

MEC-GAR

Not available

£38.90 * £27.90 - £43.90*

Magazines

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: