Absolutely Essential For Accurate, Safe, Chamber Work
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06, 8mm-06, .338-06 and .35 Whelen. Magnum Cartridges are .257 Weatherby, .264 Win, 6.5 Rem Mag, .270 Weatherby, .275 H&H, 7mm Rem Mag, 7mm Weatherby, 7x61 S&H, .300 H&H, .300 Win Mag, .30-338, .300 Weatherby, .308 Norma, 8mm Mag, .338 Win, .340 Weatherby, .350 Rem Mag, .357 Norma, .375 H&H, .416 Rem Mag and .458 Win.
More...
Customer ratings for CLYMER 300 REMINGTON ULTRA MAGNUM NO-GO GAUGE
Number of ratings: 6
From brownells.com: 6
Average rating: 4.8
Good Gauge(09/03/2017)
Good Gauge, Good Value. The identification on the gauge is not easily readable, but it should be kept in its well labeled case like any precision gauge.
Safety First(09/03/2017)
I purchase this Gauge after trying to locate a gunsmith near where I lived and worked to check the head space on my AR build. It was cheaper than a 2-3 hour drive and it work as it was designed.
Works(30/03/2017)
Works as advertized.
I used this to check Colt SAA 1st Gen(14/07/2018)
1st Gen Colt SAA checked out OK with this gauge. Works as advertised. Had to remove cylinder to get the gauge out, since it would not rotate into recoil plate.
I have to give it a good review because it's my fault. The extractor on my mosin nagant 91/30 absolutely won't budge. The go works fine but the no go obviously won't seat correctly without the removal of the extractor. Both (go and no go) look like fine tools but I can't rate them so much as I can say you DON'T have to remove the firing pin you DO have to remove the extractor so make sure you can do that before ordering them.
Works as advertised(03/07/2012)
The gentleman who wrote the 1st review: You must remove the extractor. So make sure you have a replacement for the part the extractor is in. I broke mine trying to get it out. Instead of removing the extractor, I cut a slot in the gauge for the extractor to pass over. Then you don't have to worry about it.
Product no.: 184100307 CLYMER 300 REMINGTON ULTRA MAGNUM NO-GO GAUGE Mfr Part: NG300REMUMAG The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
59.9GBP20£59.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 300 Remington Ultra Magnum, 7 mm Remington Ultra Magnum, 375 Remington Ultra MagnumStyle: No Go Gauge
The Clymer No-Go Gauge is essential for checking the chamber length of rifles for safety and accuracy, particularly when fitting a new barrel or purchasing a used firearm.
These gauges are etched with "No-Go" and the caliber name, and are made to SAAMI specs to fit a range of cartridges including the 300 Remington Ultra Magnum.
Clymer's machined steel gauges are interchangeable among various calibers within the same Stock #, ensuring versatility and ease of use for different firearms.
Attributes
Cartridge:
300 Remington Ultra Magnum,7 mm Remington Ultra Magnum,375 Remington Ultra Magnum
Style:
No Go Gauge
Delivery weight: 0.136kg
Item details
Made in USA
Product no.: 184100219 CLYMER 221 REMINGTON FIREBALL NO-GO GAUGE Mfr Part: NG221REM The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
HEADSPACE GAUGES are essential for checking the chamber length of rifles for safety and accuracy, especially when fitting new barrels or buying used guns.
The Clymer 221 REMINGTON FIREBALL NO-GO GAUGE is specifically designed for the .221 Remington Fireball cartridge and is made to SAAMI specs.
The gauges are made of machined steel, with each caliber having a specific size, and are etched with "No-Go" and the caliber name for easy identification.
Attributes
Cartridge:
221 Remington Fireball
Style:
No Go Gauge
Delivery weight: 0.014kg
Item details
Made in USA
Product no.: 184100221 CLYMER 22 LONG RIFLE NO-GO GAUGE Mfr Part: NG22LR The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP17£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 22 Long Rifle, 22 Short, 22 Long, 22 Bentz, 22 MatchStyle: No Go Gauge
The Clymer 22 Long Rifle No-Go Gauge is essential for measuring the chamber length of a rifle to ensure safety and accuracy, especially when chambering a new barrel or buying a used gun.
Gauges are clearly etched with "No-Go" and the caliber/gauge name for easy identification and are made to SAAMI specs.
These machined steel gauges are interchangeable between various calibers that share the same stock number, expanding their usability across multiple cartridge types.
Attributes
Cartridge:
22 Long,22 Bentz,22 Match,22 Short,22 Long Rifle
Style:
No Go Gauge
Delivery weight: 0.005kg
Item details
Made in USA
Product no.: 184100223 CLYMER 6MM BR NO-GO GAUGE Mfr Part: NGBR The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 6MM BR NO-GO GAUGE is essential for checking the chamber length of a rifle, crucial for safety and accuracy, especially when chambering a new barrel or purchasing a used gun.
These gauges are etched with "No-Go" and the caliber name, and are made to SAAMI specs to ensure precise measurements.
The gauges are made of machined steel and are interchangeable between different calibers within the same stock number, enhancing their versatility for various cartridge sizes.
Attributes
Cartridge:
22 BR (Benchrest) Remington,6 mm BR Norma,7 mm BR (Benchrest) Remington
Style:
No Go Gauge
Delivery weight: 0.023kg
Cartridge:
22 WRF,17 HMR,22 RF
Style:
No Go Gauge
Delivery weight: 0.005kg
Item details
Made in USA
Product no.: 184100241 CLYMER 223 REMINGTON NO-GO GAUGE Mfr Part: NG223REM The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP17£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 223 Remington, 6 mm x 45Style: No Go Gauge
The Clymer 223 Remington No-Go Gauge is essential for measuring the chamber length of rifles to ensure safety and accuracy, especially when chambering a new barrel or purchasing a used gun.
These gauges are clearly marked with "No-Go" and the caliber for easy identification and are made according to SAAMI specifications.
The gauges are machined steel and can be interchangeable between calibers that share the same stock number, offering versatility for different cartridge sizes.
Attributes
Cartridge:
223 Remington,6 mm x 45
Style:
No Go Gauge
Delivery weight: 0.018kg
Cartridge:
243 Winchester,308 Winchester,358 Winchester,260 Remington,7 mm - 08 Remington
Style:
No Go Gauge
Delivery weight: 0.045kg
Item details
Made in USA
Product no.: 184100266 CLYMER 300 SAVAGE NO-GO GAUGE Mfr Part: NG300SAV The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 300 SAVAGE NO-GO GAUGE is essential for checking the headspace of a rifle chamber to ensure safety and accuracy, especially when chambering a new barrel or buying a used gun.
These gauges are etched with "No-Go" and the caliber name for easy identification and are made to SAAMI specs, ensuring reliable measurements.
The product is machined steel and the size varies with caliber and gauge style, with interchangeable gauges available for certain groups of cartridges.
Attributes
Cartridge:
300 Savage
Style:
No Go Gauge
Delivery weight: 0.036kg
Cartridge:
303 British,30-40 Krag
Style:
No Go Gauge
Delivery weight: 0.014kg
Item details
Made in USA
Product no.: 184100311 CLYMER 30-06 SPRINGFIELD NO-GO GAUGE Mfr Part: NG3006SPR The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 30-06 Springfield No-Go Gauge is essential for checking the chamber length of rifles for safety and accuracy, especially when chambering a new barrel or buying a used gun.
These gauges are etched with "No-Go" and the caliber name for easy identification and are made to SAAMI specs to ensure proper fit and measurement.
The No-Go Gauge is interchangeable among various calibers within the same stock number, making it versatile for use with multiple cartridge types such as 30-06 Springfield, 270 Winchester, and others.
Attributes
Cartridge:
30-06 Springfield,6.5-06,270 Winchester,8 mm-06,338-06,35 Whelen,25-06 Remington
Style:
No Go Gauge
Delivery weight: 0.045kg
Item details
Made in USA
Product no.: 184100321 CLYMER BELTED MAGNUM NO-GO GAUGE Mfr Part: NGBLT The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP16£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 300 Winchester Magnum, 375 H&H Magnum, 350 Remington MagStyle: No Go Gauge
The Clymer Belted Magnum No-Go Gauge is essential for checking rifle chamber length to ensure safety and accuracy, especially when chambering a new barrel or purchasing a used gun.
These gauges are etched with "No-Go" and caliber for easy identification and are made to SAAMI specs, ensuring reliable and standardized measurements.
The No-Go Gauge is compatible with various magnum cartridges, including the 300 Winchester Magnum and 375 H&H Magnum, and is made from machined steel for durability.
Attributes
Cartridge:
300 Winchester Magnum,350 Remington Mag,375 H&H Magnum
Style:
No Go Gauge
Delivery weight: 0.023kg
Item details
Made in USA
Product no.: 184100341 CLYMER 9MM LUGER NO-GO GAUGE Mfr Part: NG9MMLUG The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP13£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Clymer 9MM LUGER NO-GO GAUGE is essential for checking the chamber length of rifles for safety and accuracy, especially when chambering new barrels or purchasing used firearms.
These gauges are etched with "No-Go" and the caliber name for easy identification and are made to SAAMI specifications.
The product is machined steel and its size varies with caliber and gauge style, with certain gauges being interchangeable between multiple calibers.
Attributes
Cartridge:
9 mm Luger
Style:
No Go Gauge
Delivery weight: 0.009kg
Item details
Made in USA
Product no.: 184100351 CLYMER 30 M1 CARBINE NO-GO GAUGE Mfr Part: NG30M1 The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP22£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Clymer 30 M1 Carbine No-Go Gauge is essential for checking the chamber length of a rifle for safety and accuracy, especially when chambering a new barrel or purchasing a used firearm.
Gauges are clearly etched with "No-Go" and the caliber/gauge name for easy identification and are made to SAAMI specifications.
These machined steel gauges are interchangeable among various calibers within the same stock number, with specific compatibility listed for .30/30, .30/06, and Magnum cartridges.
Attributes
Cartridge:
30 Carbine
Style:
No Go Gauge
Delivery weight: 0.014kg
Item details
Made in USA
Product no.: 184100361 CLYMER 25-20 WINCHESTER NO-GO GAUGE Mfr Part: NG2520 The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP19£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 218 Bee, 25-20 Winchester, 32-20 Winchester, 218 Mashburn BeeStyle: No Go Gauge
The Clymer 25-20 Winchester No-Go Gauge is essential for measuring the chamber length of a rifle to ensure safety and accuracy, especially when chambering a new barrel or purchasing a used gun.
Gauges are clearly etched with "No-Go" and the caliber/gauge name for easy identification and are made to SAAMI specs.
Compatible with multiple calibers, the No-Go Gauge can be used with 218 Bee, 25-20 Winchester, and 32-20 Winchester, among others, and is interchangeable with other calibers that share the same stock number.
Attributes
Cartridge:
218 Mashburn Bee,218 Bee,25-20 Winchester,32-20 Winchester
Style:
No Go Gauge
Delivery weight: 0.009kg
Item details
Made in USA
Product no.: 184100381 CLYMER 357 MAGNUM NO-GO GAUGE Mfr Part: NG357MGN The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 357 MAGNUM NO-GO GAUGE is essential for checking the chamber length of rifles for safety and accuracy, especially when chambering a new barrel or buying a used gun.
Made to SAAMI specs, the gauge is etched with "No-Go" and the caliber name for easy identification and is made of machined steel.
While the gauge is specifically for the 357 Magnum and 38 Special cartridges, Clymer produces interchangeable gauges for various other calibers as per the listed specifications.
Attributes
Cartridge:
357 Magnum,38 Special
Style:
No Go Gauge
Delivery weight: 0.009kg
Item details
Made in USA
Product no.: 184100391 CLYMER 38 SUPER NO-GO GAUGE Mfr Part: NG38SUPN The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP12£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Clymer 38 Super No-Go Gauge is essential for checking the chamber length of a rifle to ensure safety and accuracy, especially when chambering a new barrel or buying a used gun.
These gauges are clearly etched with "No-Go" and the caliber for easy identification and are made to SAAMI specs for precision.
The product is made of machined steel and is part of a range where gauges are interchangeable among various calibers within the same stock number.
Attributes
Cartridge:
38 Super
Style:
No Go Gauge
Delivery weight: 0.014kg
Cartridge:
44 Magnum,44 Special
Style:
No Go Gauge
Delivery weight: 0.014kg
Item details
Made in USA
Product no.: 184100451 CLYMER 45 ACP NO-GO GAUGE Mfr Part: NG45ACP The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 45 ACP No-Go Gauge is essential for measuring the chamber length of a rifle, crucial for safety and accuracy, especially when fitting a new barrel or purchasing a used firearm.
Gauges are clearly marked with "No-Go" and the caliber for easy identification and are made to SAAMI specifications to ensure reliability.
These machined steel gauges are part of a system that is interchangeable between various calibers that share the same stock number, providing versatility across different firearm calibers.
Attributes
Cartridge:
45 Auto (ACP)
Style:
No Go Gauge
Delivery weight: 0.023kg
Cartridge:
7.62 x 54 mm Russian
Style:
No Go Gauge
Delivery weight: 0.018kg
Item details
Made in USA
Product no.: 184110121 CLYMER 12 GAUGE NO-GO GAUGE Mfr Part: NG12 The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
64.9GBP36£64.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Clymer 12 Gauge No-Go Gauge is crucial for measuring the chamber length of rifles to ensure safety and precision when chambering a new barrel or buying a used gun.
Each gauge is clearly etched with "No-Go" and the caliber/gauge name for easy identification and is made according to SAAMI specs.
The gauges are made of machined steel and are interchangeable between various calibers that share the same stock number.
Attributes
Cartridge:
12 Gauge
Style:
No Go Gauge
Delivery weight: 0.091kg
Item details
Made in USA
Product no.: 184110201 CLYMER 20 GAUGE NO-GO GAUGE Mfr Part: NG20 The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 20 Gauge No-Go Gauge is essential for checking the chamber length of rifles to ensure safety and accuracy, especially when chambering a new barrel or buying a used gun.
These gauges are etched with "No-Go" and the caliber/gauge name for easy identification and are made to SAAMI specs.
The product is made of machined steel and can be used interchangeably between calibers that share the same Stock #.
Attributes
Cartridge:
20 Gauge
Style:
No Go Gauge
Delivery weight: 0.068kg
Cartridge:
204 Ruger
Style:
No Go Gauge
Delivery weight: 0.023kg
Item details
Made in USA
Product no.: 100011311 CLYMER 300 AAC BLACKOUT NO-GO GAUGE Mfr Part: NG300BLACK The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP23£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
Specs:Cartridge: 300 AAC BlackoutStyle: No Go Gauge
The Clymer 300 AAC BLACKOUT NO-GO GAUGE is essential for measuring the chamber length of rifles, crucial when chambering new barrels or checking used guns for safety.
Each gauge is etched with the designation "No-Go" and the caliber to provide easy identification, and they are made to SAAMI specifications.
The gauges are machined steel and can be interchangeable between calibers that share the same Stock #, with size varying according to caliber and gauge style.
Attributes
Cartridge:
300 AAC Blackout
Style:
No Go Gauge
Delivery weight: 0.136kg
Item details
Made in USA
Product no.: 184000078 CLYMER 224 VALYRIE NO-GO GAUGE Mfr Part: NG224VALK The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
48.9GBP16£48.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The Clymer 224 Valkyrie No-Go Gauge is crucial for measuring the chamber length of a rifle, ensuring safety and accuracy.
It is essential for checking headspace on new barrels and used guns before use.
The gauges are marked with "No-Go" and the caliber for easy identification and are made to SAAMI specifications.
Attributes
Cartridge:
224 Valkyrie
Style:
No Go Gauge
Delivery weight: 0.025kg
Item details
Made in USA
Product no.: 184000080 CLYMER 6.5MM CREEDMOOR NO-GO GAUGE Mfr Part: NG65CREED The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 6.5MM Creedmoor No-Go Gauge is essential for checking rifle chamber length to ensure safety and accuracy, particularly when chambering a new barrel or buying a used gun.
Gauges are clearly etched with "No-Go" and the caliber for easy identification and are made to SAAMI specifications.
The No-Go Gauge is part of a range that is interchangeable between different calibers, and it's made from machined steel for durability.
Attributes
Cartridge:
6.5 Creedmoor,22 Creedmoor,6mm Creedmoor
Style:
No Go Gauge
Delivery weight: 0.036kg
Item details
Made in USA
Product no.: 184100264 CLYMER 300 WSM NO-GO GAUGE Mfr Part: NG300WSM The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
Specs:Cartridge: 300 WSM (Winchester Short Mag), 270 WSM (Winchester Short Mag), 338 Winchester Magnum, 325 WSM (Winchester Short Mag)Style: No Go Gauge
The Clymer 300 WSM NO-GO GAUGE is essential for measuring chamber length and ensuring safety and accuracy when chambering a new barrel or purchasing a used firearm.
These gauges are clearly etched with "No-Go" and the caliber for easy identification and are made to SAAMI specs for reliability.
While designed for the 300 WSM cartridge, this NO-GO gauge is also compatible with other calibers such as 270 WSM, 338 Winchester Magnum, and 325 WSM.
Attributes
Cartridge:
300 WSM (Winchester Short Mag),270 WSM (Winchester Short Mag),325 WSM (Winchester Short Mag),338 Winchester Magnum
Style:
No Go Gauge
Delivery weight: 0.045kg
Cartridge:
7 mm Mauser (7 x 57 mm Mauser),257 Roberts
Style:
No Go Gauge
Delivery weight: 0.036kg
Item details
Made in USA
Product no.: 184100331 CLYMER 45-70 GOVERNMENT NO-GO GAUGE Mfr Part: NG4570GOVT The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 45-70 Government No-Go Gauge is essential for measuring the chamber length of a rifle, crucial for safety and precision, especially when fitting a new barrel or purchasing a used firearm.
Each gauge is clearly marked with "Go" or "No-Go" and the caliber for easy identification, and is made according to SAAMI specifications to ensure reliability.
The gauges are made of machined steel and are interchangeable among various calibers that share the same stock number, enhancing their versatility for different firearms.
Attributes
Cartridge:
33 WCF,348 Winchester,40-65 Winchester,45-70 Government
Style:
No Go Gauge
Delivery weight: 0.018kg
Item details
Made in USA
Product no.: 184100491 CLYMER 7.62X39MM NO-GO GAUGE Mfr Part: NG76239 The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 7.62x39mm No-Go Gauge is essential for checking the headspace of a rifle chamber to ensure safety and accuracy, especially when chambering a new barrel or buying a used gun.
Gauges are clearly etched with "No-Go" and the caliber for easy identification and are made to SAAMI specs.
The No-Go Gauge is made of machined steel and is part of a series where gauges are interchangeable between different calibers within the same stock number.
Attributes
Cartridge:
7.62 x 39 mm Russian
Style:
No Go Gauge
Delivery weight: 0.023kg
Item details
Made in USA
Product no.: 184000036 CLYMER 5.56X45MM NATO NO-GO GAUGE Mfr Part: NG556NATO The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 5.56X45MM NATO No-Go Gauge is essential for checking the chamber length of rifles for safety and accuracy, especially when chambering a new barrel or purchasing a used firearm.
These gauges are clearly etched with "No-Go" and the caliber for easy identification and are made to SAAMI specifications to ensure reliability.
Made from machined steel, the Clymer gauges are part of a broader range that includes interchangeable gauges for different calibers, as indicated by the same Stock #.
Attributes
Cartridge:
5.56 mm NATO
Style:
No Go Gauge
Delivery weight: 0.005kg
Item details
Made in USA
Product no.: 184100236 CLYMER 22 HORNET NO-GO GAUGE Mfr Part: NG22HOR The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer No-Go Gauge is essential for checking the headspace of a rifle chamber to ensure safety and accuracy, especially when chambering a new barrel or buying a used gun.
These gauges are etched with "No-Go" and the caliber/gauge name for easy identification and are made to SAAMI specs by Clymer.
The No-Go Gauge for the 22 Hornet and 17 Hornet is made of machined steel, with the size varying by caliber and gauge style, and is part of the Headspace Gauges category.
Attributes
Cartridge:
22 Hornet,17 Hornet
Style:
No Go Gauge
Delivery weight: 0.005kg
Item details
Made in USA
Product no.: 184100256 CLYMER 250 SAVAGE NO-GO GAUGE Mfr Part: NG250SAV The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 250 SAVAGE NO-GO GAUGE is essential for testing the chamber length of a rifle to ensure safety and accuracy, particularly when chambering a new barrel or buying a used gun.
These gauges are clearly etched with "No-Go" and the caliber name for easy identification and are manufactured according to SAAMI specifications.
The product is made of machined steel and is designed to be interchangeable among various calibers within the same Stock #, enhancing its versatility for different cartridge sizes.
Attributes
Cartridge:
250 Savage
Style:
No Go Gauge
Delivery weight: 0.023kg
Item details
Made in USA
Product no.: 184100511 CLYMER 45 LONG COLT NO-GO GAUGE Mfr Part: NG45LC The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
The Clymer 45 Long Colt No-Go Gauge is essential for checking the headspace of a rifle's chamber when chambering a new barrel or buying a used gun to ensure safety and accuracy.
Made to SAAMI specs, the gauges are etched with "No-Go" and the caliber name for easy identification, and are made from machined steel.
Gauges are interchangeable between calibers that share the same Stock #, which includes a wide range of cartridges for different rifle calibers.
Attributes
Cartridge:
45 (Long) Colt
Style:
No Go Gauge
Delivery weight: 0.018kg
Item details
Made in USA
Ensure your rifle's safety with the Clymer No-Go Headspace Gauge for 300 REM ULTRA MAGNUM 🎯 Precision-crafted to SAAMI specs. Shop now for accurate chamber measurement! 🔍🛒
Absolutely Essential For Accurate, Safe, Chamber Work
The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs.
SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp, .219 Zipper, .22 Sav HP, .30-30, .32 Win Spl, .32-40, .375 Win and .38-55. .30/06 Cartridges are .25-06, 6.5mm-06, .270 Win, .30-06, 8mm-06, .338-06 and .35 Whelen. Magnum Cartridges are .257 Weatherby, .264 Win, 6.5 Rem Mag, .270 Weatherby, .275 H&H, 7mm Rem Mag, 7mm Weatherby, 7x61 S&H, .300 H&H, .300 Win Mag, .30-338, .300 Weatherby, .308 Norma, 8mm Mag, .338 Win, .340 Weatherby, .350 Rem Mag, .357 Norma, .375 H&H, .416 Rem Mag and .458 Win.
More...
Customer ratings for CLYMER 300 REMINGTON ULTRA MAGNUM NO-GO GAUGE
Number of ratings: 6
From brownells.com: 6
Average rating: 4.8
Good Gauge(09/03/2017)
Good Gauge, Good Value. The identification on the gauge is not easily readable, but it should be kept in its well labeled case like any precision gauge.
Safety First(09/03/2017)
I purchase this Gauge after trying to locate a gunsmith near where I lived and worked to check the head space on my AR build. It was cheaper than a 2-3 hour drive and it work as it was designed.
Works(30/03/2017)
Works as advertized.
I used this to check Colt SAA 1st Gen(14/07/2018)
1st Gen Colt SAA checked out OK with this gauge. Works as advertised. Had to remove cylinder to get the gauge out, since it would not rotate into recoil plate.
I have to give it a good review because it's my fault. The extractor on my mosin nagant 91/30 absolutely won't budge. The go works fine but the no go obviously won't seat correctly without the removal of the extractor. Both (go and no go) look like fine tools but I can't rate them so much as I can say you DON'T have to remove the firing pin you DO have to remove the extractor so make sure you can do that before ordering them.
Works as advertised(03/07/2012)
The gentleman who wrote the 1st review: You must remove the extractor. So make sure you have a replacement for the part the extractor is in. I broke mine trying to get it out. Instead of removing the extractor, I cut a slot in the gauge for the extractor to pass over. Then you don't have to worry about it.