The BCMGUNFIGHTER™ Compensator Mod 3-5.56 This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure. Tuned slots and ports offer recoil mitigation, compensation of muzzle-rise, and flash reduction. Dual action brake minimizes side pressure and designed to have less noise associated with typical compensators. Nitride treated for maximum corrosion resistance Predrilled hole at the base for permanent installation. Includes a Crush Washer Should be installed by a qualified armorer. Threaded 1/2 x 28 for 5.56mm AR15 platforms. Extended version of the BCMGUNFIGHTER™ MOD 2 - 5.56. Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA) Please note: The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contains not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.
More...
124.9124.91GBP
Product no.: 430105159 BRAVO COMPANY BCMGUNFIGHTER COMPENSATOR MOD 3- 5.56MM Mfr Part: BCM-GFC-MOD-3-5812526023612 The BCMGUNFIGHTER™ Compensator Mod 3-5.56 This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure. Tuned slots and ports offer recoil mitigation, compensation of muzzle-rise, and flash reduction. Dual action brake minimizes side pressure and designed to have less noise associated with typical compensators. Nitride treated for maximum corrosion resistance Predrilled hole at the base for permanent installation. Includes a Crush Washer Should be installed by a qualified armorer. Threaded 1/2 x 28 for 5.56mm AR15 platforms. Extended version of the BCMGUNFIGHTER™ MOD 2 - 5.56. Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA) Please note: The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contains not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.
124.9GBP11£124.90
*
Delivery time approx. 7-14 days. More than 10 pieces in USA warehouse
The BCMGUNFIGHTER Compensator Mod 3-5.56 is designed for tactical use, reducing muzzle rise, flash signature, noise, and lateral pressure.
It is nitride treated for corrosion resistance, has a predrilled hole for permanent installation, and should be installed by a qualified armorer.
This compensator is threaded 1/2 x 28 for 5.56mm AR15 platforms and can extend a 14.5-inch barrel to over 16 inches to comply with BATF specs for non-NFA status.
🔫 Enhance your shooting with the BCMGUNFIGHTER Compensator Mod 3-5.56mm 🎯. Experience reduced muzzle rise & noise with this steel, black-finished AR-15 accessory. Get started now!
The BCMGUNFIGHTER™ Compensator Mod 3-5.56 This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure. Tuned slots and ports offer recoil mitigation, compensation of muzzle-rise, and flash reduction. Dual action brake minimizes side pressure and designed to have less noise associated with typical compensators. Nitride treated for maximum corrosion resistance Predrilled hole at the base for permanent installation. Includes a Crush Washer Should be installed by a qualified armorer. Threaded 1/2 x 28 for 5.56mm AR15 platforms. Extended version of the BCMGUNFIGHTER™ MOD 2 - 5.56. Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA) Please note: The combustion gasses exiting the muzzle of a rifle are extremely hot, traveling at extreme velocity, and contains not only burning gasses but solid particles of unburnt powder as well as metals from the projectile. Due to the inherent nature of steel, it is nearly impossible to survive unaffected in this environment when directly exposed. The high temperatures begin to make the steel more malleable, which allows solid particles and pressure waves to deform and erode surfaces upon exit.