Help and contact
United Kingdom
(0) Basket
Newsletter
CRY HAVOC TACTICAL INC.
AR 308 QRB UPPER RECEIVER TAKEDOWN KIT
669.9
689.9
3
GBP
Product no.: 100045500
CRY HAVOC TACTICAL INC. QRB UPPER RECEIVER TAKEDOWN KIT CARBINE GAS TUBE
Mfr Part: 308 QRB CARBINE Cry Havoc Tactical takes their QRB (Quick Release Barrel) kit and scales it up for the big guns! Designed for your AR 308 or 6.5 Creedmoor the QRB allows you to quickly detach the barrel giving you the ability to store or carry your rifle in a much reduced profile and then when needed quickly reassemble the rifle while holding within 1 MOA. Each kit contains complete instructions and all parts to convert your rifle or without drilling or any permanent modifications. Although they recommend installation be done by a Gunsmith, if you can install a barrel on an upper receiver, you can install this kit. Simple hand tools, an Armour's wrench and receiver block/vise is all that is needed. Returning your rifle or pistol back to stock is as easy as the installation. The QRB main body is Hard Anodized Aluminum and the Stainless-Steel hooks, levers, star nut and gas extension are finished in Black Nitride for maximum durability. Once the QRB Kit is installed, it is amazingly quick to assemble your rifle or pistol without worry of damaging your gas tube. The operator would simply lock the bolt back, insert the barrel extension into the receiver, rotate barrel until the alignment pin enters the alignment hole and then seat the barrel in place. Next, hook the two clips on the receiver plate and engage the levers to the closed position, never taking your hand off the pistol grip. Nothing to depress! Just drop the bolt and you are ready to fire... All in less than 6 seconds! To remove the barrel assembly for storage, first remove the magazine, lock bolt back, check for an empty chamber, pull levers away from the hand guard, remove hooks from the receiver plate and pull barrel away from the receiver. Just that simple. No barrel rattling around in the handguard or gloves needed! Make sure to check out the videos in the Media Tab to see these steps happen in real time. You will be amazed. The QRB Kit is only compatible with Free Float Hand Guards 2.2"" wide or less and will add 1.7"" to the length of the Hand Guard. Purchase the correct kit by selecting the proper length gas tube to your barrels gas system length.
CRY HAVOC TACTICAL INC. QRB UPPER RECEIVER TAKEDOWN KIT CARBINE GAS TUBE
Mfr Part: 308 QRB CARBINE Cry Havoc Tactical takes their QRB (Quick Release Barrel) kit and scales it up for the big guns! Designed for your AR 308 or 6.5 Creedmoor the QRB allows you to quickly detach the barrel giving you the ability to store or carry your rifle in a much reduced profile and then when needed quickly reassemble the rifle while holding within 1 MOA. Each kit contains complete instructions and all parts to convert your rifle or without drilling or any permanent modifications. Although they recommend installation be done by a Gunsmith, if you can install a barrel on an upper receiver, you can install this kit. Simple hand tools, an Armour's wrench and receiver block/vise is all that is needed. Returning your rifle or pistol back to stock is as easy as the installation. The QRB main body is Hard Anodized Aluminum and the Stainless-Steel hooks, levers, star nut and gas extension are finished in Black Nitride for maximum durability. Once the QRB Kit is installed, it is amazingly quick to assemble your rifle or pistol without worry of damaging your gas tube. The operator would simply lock the bolt back, insert the barrel extension into the receiver, rotate barrel until the alignment pin enters the alignment hole and then seat the barrel in place. Next, hook the two clips on the receiver plate and engage the levers to the closed position, never taking your hand off the pistol grip. Nothing to depress! Just drop the bolt and you are ready to fire... All in less than 6 seconds! To remove the barrel assembly for storage, first remove the magazine, lock bolt back, check for an empty chamber, pull levers away from the hand guard, remove hooks from the receiver plate and pull barrel away from the receiver. Just that simple. No barrel rattling around in the handguard or gloves needed! Make sure to check out the videos in the Media Tab to see these steps happen in real time. You will be amazed. The QRB Kit is only compatible with Free Float Hand Guards 2.2"" wide or less and will add 1.7"" to the length of the Hand Guard. Purchase the correct kit by selecting the proper length gas tube to your barrels gas system length.
669.9
GBP
1
£669.90
*
Is a 'Call to order' product.
Not available.
Specs:
Color: Black
Material: Aluminum
Restrictions
- Is a 'Call to order' product.
Top takeaways
- The AR 308 QRB Upper Receiver Takedown Kit by Cry Havoc Tactical allows for quick detachment and reassembly of the barrel, maintaining accuracy within 1 MOA.
- No permanent modifications are needed for installation, and the kit is compatible with AR 308 or 6.5 Creedmoor rifles with free float handguards up to 2.2" wide.
- The kit includes hard anodized aluminum and black nitride finished stainless-steel components, ensuring durability and ease of use without the need for specialized tools.
Attributes
Colour: Black Material: Aluminum Delivery weight: 0.454kg
Item details
Made in USA
US export classification: 0A501.x
US export classification: 0A501.x
Product no.: 100045501
CRY HAVOC TACTICAL INC. QRB UPPER RECEIVER TAKEDOWN KIT MID-LENGTH GAS TUBE
Mfr Part: 308 QRB MID-LEN 793888119512 Cry Havoc Tactical takes their QRB (Quick Release Barrel) kit and scales it up for the big guns! Designed for your AR 308 or 6.5 Creedmoor the QRB allows you to quickly detach the barrel giving you the ability to store or carry your rifle in a much reduced profile and then when needed quickly reassemble the rifle while holding within 1 MOA. Each kit contains complete instructions and all parts to convert your rifle or without drilling or any permanent modifications. Although they recommend installation be done by a Gunsmith, if you can install a barrel on an upper receiver, you can install this kit. Simple hand tools, an Armour's wrench and receiver block/vise is all that is needed. Returning your rifle or pistol back to stock is as easy as the installation. The QRB main body is Hard Anodized Aluminum and the Stainless-Steel hooks, levers, star nut and gas extension are finished in Black Nitride for maximum durability. Once the QRB Kit is installed, it is amazingly quick to assemble your rifle or pistol without worry of damaging your gas tube. The operator would simply lock the bolt back, insert the barrel extension into the receiver, rotate barrel until the alignment pin enters the alignment hole and then seat the barrel in place. Next, hook the two clips on the receiver plate and engage the levers to the closed position, never taking your hand off the pistol grip. Nothing to depress! Just drop the bolt and you are ready to fire... All in less than 6 seconds! To remove the barrel assembly for storage, first remove the magazine, lock bolt back, check for an empty chamber, pull levers away from the hand guard, remove hooks from the receiver plate and pull barrel away from the receiver. Just that simple. No barrel rattling around in the handguard or gloves needed! Make sure to check out the videos in the Media Tab to see these steps happen in real time. You will be amazed. The QRB Kit is only compatible with Free Float Hand Guards 2.2"" wide or less and will add 1.7"" to the length of the Hand Guard. Purchase the correct kit by selecting the proper length gas tube to your barrels gas system length.
CRY HAVOC TACTICAL INC. QRB UPPER RECEIVER TAKEDOWN KIT MID-LENGTH GAS TUBE
Mfr Part: 308 QRB MID-LEN 793888119512 Cry Havoc Tactical takes their QRB (Quick Release Barrel) kit and scales it up for the big guns! Designed for your AR 308 or 6.5 Creedmoor the QRB allows you to quickly detach the barrel giving you the ability to store or carry your rifle in a much reduced profile and then when needed quickly reassemble the rifle while holding within 1 MOA. Each kit contains complete instructions and all parts to convert your rifle or without drilling or any permanent modifications. Although they recommend installation be done by a Gunsmith, if you can install a barrel on an upper receiver, you can install this kit. Simple hand tools, an Armour's wrench and receiver block/vise is all that is needed. Returning your rifle or pistol back to stock is as easy as the installation. The QRB main body is Hard Anodized Aluminum and the Stainless-Steel hooks, levers, star nut and gas extension are finished in Black Nitride for maximum durability. Once the QRB Kit is installed, it is amazingly quick to assemble your rifle or pistol without worry of damaging your gas tube. The operator would simply lock the bolt back, insert the barrel extension into the receiver, rotate barrel until the alignment pin enters the alignment hole and then seat the barrel in place. Next, hook the two clips on the receiver plate and engage the levers to the closed position, never taking your hand off the pistol grip. Nothing to depress! Just drop the bolt and you are ready to fire... All in less than 6 seconds! To remove the barrel assembly for storage, first remove the magazine, lock bolt back, check for an empty chamber, pull levers away from the hand guard, remove hooks from the receiver plate and pull barrel away from the receiver. Just that simple. No barrel rattling around in the handguard or gloves needed! Make sure to check out the videos in the Media Tab to see these steps happen in real time. You will be amazed. The QRB Kit is only compatible with Free Float Hand Guards 2.2"" wide or less and will add 1.7"" to the length of the Hand Guard. Purchase the correct kit by selecting the proper length gas tube to your barrels gas system length.
669.9
GBP
1
£669.90
*
Is a 'Call to order' product.
Not available.
Specs:
Color: Black
Make: AR .308
Material: Aluminum
Product no.: 100045502
CRY HAVOC TACTICAL INC. QRB UPPER RECEIVER TAKEDOWN KIT RIFLE GAS TUBE
Mfr Part: 308 QRB KIT RGT 793888119611 Cry Havoc Tactical takes their QRB (Quick Release Barrel) kit and scales it up for the big guns! Designed for your AR 308 or 6.5 Creedmoor the QRB allows you to quickly detach the barrel giving you the ability to store or carry your rifle in a much reduced profile and then when needed quickly reassemble the rifle while holding within 1 MOA. Each kit contains complete instructions and all parts to convert your rifle or without drilling or any permanent modifications. Although they recommend installation be done by a Gunsmith, if you can install a barrel on an upper receiver, you can install this kit. Simple hand tools, an Armour's wrench and receiver block/vise is all that is needed. Returning your rifle or pistol back to stock is as easy as the installation. The QRB main body is Hard Anodized Aluminum and the Stainless-Steel hooks, levers, star nut and gas extension are finished in Black Nitride for maximum durability. Once the QRB Kit is installed, it is amazingly quick to assemble your rifle or pistol without worry of damaging your gas tube. The operator would simply lock the bolt back, insert the barrel extension into the receiver, rotate barrel until the alignment pin enters the alignment hole and then seat the barrel in place. Next, hook the two clips on the receiver plate and engage the levers to the closed position, never taking your hand off the pistol grip. Nothing to depress! Just drop the bolt and you are ready to fire... All in less than 6 seconds! To remove the barrel assembly for storage, first remove the magazine, lock bolt back, check for an empty chamber, pull levers away from the hand guard, remove hooks from the receiver plate and pull barrel away from the receiver. Just that simple. No barrel rattling around in the handguard or gloves needed! Make sure to check out the videos in the Media Tab to see these steps happen in real time. You will be amazed. The QRB Kit is only compatible with Free Float Hand Guards 2.2"" wide or less and will add 1.7"" to the length of the Hand Guard. Purchase the correct kit by selecting the proper length gas tube to your barrels gas system length.
CRY HAVOC TACTICAL INC. QRB UPPER RECEIVER TAKEDOWN KIT RIFLE GAS TUBE
Mfr Part: 308 QRB KIT RGT 793888119611 Cry Havoc Tactical takes their QRB (Quick Release Barrel) kit and scales it up for the big guns! Designed for your AR 308 or 6.5 Creedmoor the QRB allows you to quickly detach the barrel giving you the ability to store or carry your rifle in a much reduced profile and then when needed quickly reassemble the rifle while holding within 1 MOA. Each kit contains complete instructions and all parts to convert your rifle or without drilling or any permanent modifications. Although they recommend installation be done by a Gunsmith, if you can install a barrel on an upper receiver, you can install this kit. Simple hand tools, an Armour's wrench and receiver block/vise is all that is needed. Returning your rifle or pistol back to stock is as easy as the installation. The QRB main body is Hard Anodized Aluminum and the Stainless-Steel hooks, levers, star nut and gas extension are finished in Black Nitride for maximum durability. Once the QRB Kit is installed, it is amazingly quick to assemble your rifle or pistol without worry of damaging your gas tube. The operator would simply lock the bolt back, insert the barrel extension into the receiver, rotate barrel until the alignment pin enters the alignment hole and then seat the barrel in place. Next, hook the two clips on the receiver plate and engage the levers to the closed position, never taking your hand off the pistol grip. Nothing to depress! Just drop the bolt and you are ready to fire... All in less than 6 seconds! To remove the barrel assembly for storage, first remove the magazine, lock bolt back, check for an empty chamber, pull levers away from the hand guard, remove hooks from the receiver plate and pull barrel away from the receiver. Just that simple. No barrel rattling around in the handguard or gloves needed! Make sure to check out the videos in the Media Tab to see these steps happen in real time. You will be amazed. The QRB Kit is only compatible with Free Float Hand Guards 2.2"" wide or less and will add 1.7"" to the length of the Hand Guard. Purchase the correct kit by selecting the proper length gas tube to your barrels gas system length.
689.9
GBP
4
£689.90
*
Is a 'Call to order' product.
Not available.
Specs:
Color: Black
Make: AR .308
Material: Aluminum
🔧 Transform your AR 308 with the Cry Havoc Tactical QRB Upper Receiver Takedown Kit! Quick assembly, no mods needed. Shop now for enhanced portability! 🔫
Why order from us?
Welcome!
to Brownells UK, your destination for anything gun related. With our roots in a genuine passion for firearms, we bring you an unmatched selection of Gun Parts, Firearm Accessories, Gunsmithing Tools, Scopes & Red Dot Sights and Expert Knowledge.
Whether you're looking to maintain, repair, or upgrade, we've got what you need!
For Shooters, By Shooters
We share your enthusiasm and know exactly what you're looking for because we're part of the community.
Massive Selection
From the essentials to the unique, find everything under one roof.
Our blend of tradition and innovation
Shop with the convenience of modern technology, backed by a legacy of experience.
Browse our collection and discover why we're the trusted name in shooting sports & hunting.
*
Prices inclusive of duty & VAT.
© 2024 Brownells UK
Part of the Brownells Europe Group
Classical view
Mobile view
