Attributes
- Weapon type:
AR-15
- Delivery weight: 0.014kg
- Shipping height: 5mm
- Shipping width: 94mm
- Shipping length: 175mm
AR-15
Product no.: 969000244
Mfr. No.: 34910
Contains one reduced power trigger spring and one disconnector spring Designed to lighten and improve trigger function For use in AR15, M16, M4, & variantsDelivery time approx. 7-14 days.
The WOLFF AR-15/M16 Trigger Function Pak is designed to elevate your shooting experience by improving the trigger function of your firearm.
Upgrade your firearm with this essential component from WOLFF and enjoy a smoother, more responsive trigger pull.
AR-15
Good bang for the buck 02/07/2017
Have used these on a few lowers. I start out with a Critical Capabilities LPK with ELG trigger. Pull weight is reduced and with some polishing on the trigger and hammer engagement surfaces I was able to get a very nice smooth pull between 4.5 and 6 lbs, (avg 5.25 lbs) with no loss of reliability on hard primers.,
Save the money 06/05/2017
I have used a lot of Wolff springs, but always in cowboy shooting guns. Some made a lot of difference, some a little, while others could be made equally well with original parts and some tuning.
This is one case to just save your money, as little as they cost to begin with. Actually, save yourself the aggravation of R&R the hammer spring just to get to this.
I took seven readings before doing a thing. They varied from7.5 to 6.75 lbs of pull; mostly 7.5. After going through the whole mess, then lubing everything again, I got the same readings. Mostly 7.5 lbs. What a disappointment!!
The worst part of it all is that this was replacing a spring out of a DPMS lower parts kit, so pretty bottom of the barrel to begin with.
OTOH, the included disconnector spring seems to tighter. It is definitely a little shorter though; not by much.
We encountered an error while loading this content. Please refresh the page to continue. If the issue persists, contact our customer support.