Your basket is empty.

Basket

01788 815115

Newsletter

YANKEE HILL MACHINE CO., INC.
AR-15/M16 TACTICAL CHARGING HANDLE LATCH

100015922

Description
Ratings (10)

Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).

SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.

More...

Customer ratings for YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH

Number of ratings: 10
From brownells.com: 10
Average rating: 4.6

BUY THIS (13/05/2015)

I bought one of these initially from a different website before Brownells started carrying it and was hooked instantly. Once Brownells picked them up I bought 3 more (and will probably buy another 3-4 eventually). A standard handle with this latch is comparable to a BCM large latch charging handle; not identical, and not exactly as good, but comparable. If you're on a budget, this is the way to go. Don't buy any other latches; I'm even considering replacing the PRI latch on my gas buster charging handle, because these are so much nicer. Gives more than enough purchase, isn't so thin that it hurts to pull back with a knife-style hand angle, and it's made by YHM instead of some random over-seas manufacturer like a lot of other latches. Buy this just to try it out. You won't regret it. I just wish I had 3 hands to make installing it easier.

YHM Charge Handle Latch (14/11/2015)

Purchased for a 5.56 gun that had a OEM latch.I have used the ambi type and square oversize type before on others.

After installing this one,I went back and bought a few more to replace my other upgraded ones.I kind of prefer the same feel on all the guns.Now I have put these on my ARs in 308 and 243 as well.

Yes I like this latch.

Only CON.The roll pin is kind of a tricky little deal.Careful the hole is lined up and do not beat it up and make it bigger(use the correct roll pin punch).Center punch next to the holes(lightly) when finished to hold the roll pin secure.Keep in mind the handle is aluminum.

Yankee Hill Latch (07/01/2016)

The pro's: great fit. wide handle with no rough edges and it was easy to install.

The Cons: it is NOT BLACK!!!! It is Battleship Gray! Not even in the realm of black.

I was sorely disappointed... It is advertised as BLACK. I now have a black rifle with a GRAY charging handle latch!

I will be contacting Brownells about the issue. They either need to correct their advertising or,if by some chance I got an odd one, check the product and ensure it matches the description before they ship it.

The photo doesn't show the gray well. It's far more gray than pic!

Great Value (21/03/2016)

Make no mistake, this is an oversized latch. Not as over-the-top as some others, but it sticks out a pretty decent length. Also note that it is more of a dull gray color - it doesn't necessarily look out of place on a black receiver, but it doesn't altogether match either. In any case, the function will please many, disengaging smoothly and promoting firm operation of the mechanism. For me it was actually a little too slick - the catch is smooth enough and the body engage-able enough that it created an impression of looseness that I don't think was actually there. But the edges are nicely rounded to avoid scrapes and excessive snagging, and the gray finish seems to hold up pretty well. It could do with just a bit of refinement as a design, but for such a great price, someone looking for an oversized latch won't be disappointed.

QUALITY! (03/08/2016)

This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!

these work (01/11/2016)

These are easy to install and they increase the ability to grasp the charging handle. I use shooting gloves when at the range so this product is helpful, when using a scope or any thing that aids the sight profile.

Worth it (30/12/2016)

It isn't an exact match in color as others have stated. More of a blued steel than black anodized aluminum look. Doesn't bother me a bit. Works great. Feels natural in the hand when operating the CH. Does stick out far but not too far. Compared it to a Bcm/Vltor & it is just a hair shorter than their large model. I have several of the B/V CHs & now realize I could've just bought standard CHs & installed this latch on them which would've saved me some money. Only problem I foresee is if you use a sling & keep the gun close to your body, the latch could be uncomfortable sticking into your stomach or chest. I have seen this with the B/V large CH. That's why I'd prefer it to be slightly smaller, but it's still worth it. Easy install with a 1/16" punch. Does not include roll pin or spring in case anyone is wondering. I definitely recommend this latch if you need to upgrade from a standard one.

No Gunsmith Required (15/03/2017)

Easy to Install on my stock DPMS handle. Be careful of the spring. May require light sanding for some handles. Great for operating handle with left hand and perfect if you have full size optics mounted.

REAL DEAL HANDS DOWN (20/05/2017)

Built like a tank , fit Perfect , three min to install. I'm a self taught redneck AR builder that spent a few min online researching the best buy for the money . I found that every man card holding scope user must have. . just took 4 minutes to install. Beat that! Long live freedom flies!

Good low cost high value upgrade (28/12/2017)

Donât let the picture fool you itâs bigger and itâs definitely not black. Fairly easy to install if youâve built ARâs before. It really works well with or without optics. The latch is sturdy enough to rack with one finger. I installed it on my WMD nib-x coated charging handle and itâs so smooth

<img width="500" src='/userdocs/reviewimages/c15efd20-cb8a-429f-b18c-f243f3593c37.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/eff693e6-4474-42e5-8f7e-2038274ae9fa.jpg' alt=''>

Read 10 more ratings on brownells.com

27.9 27.9 1 GBP

Product no.: 100015922
YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH
Mfr Part: YHM281 Never Struggle to charge your AR-15 again! This replacement latch allows you to access your charging handle with ease. Particularly popular among those with a scope on their AR-15, or those who wear gloves while shooting. This latch features extra surface area to reach for when you need to charge your AR-15 rifle. Steel construction with a dark gray finish. Includes latch only, uses existing spring and roll pin. (Does not include spring or roll pin).

27.9 GBP 30 £27.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Specs: Make: AR-15

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

This charging handle latch is designed for AR-15/M16 rifles and is ideal for use with scopes or when wearing gloves.
Made by YANKEE HILL MACHINE CO., INC., the latch is constructed from steel with a gray finish.
The product includes the latch only, without the spring or roll pin, and fits standard AR15/M16 charging handles.

Attributes

Make: AR-15 Delivery weight: 0.041kg

Item details

Made in USA
US export classification: 0A501.x

🔫 Upgrade your AR-15 with YANKEE HILL's Tactical Charging Handle Latch! Easy access, perfect for scopes & gloves. Steel construction, gray finish. Learn more! 🎯

Description
Ratings (10)

SPECS: Fits - AR15/M16 standard charging handles. Finish - Gray. Construction - Steel. Incldes - Latch only. Does not include roll pin or spring.

More...

Customer ratings for YANKEE HILL MACHINE CO., INC. AR15/M16 CHARGING HANDLE LATCH

Number of ratings: 10
From brownells.com: 10
Average rating: 4.6

BUY THIS (13/05/2015)

YHM Charge Handle Latch (14/11/2015)

Yankee Hill Latch (07/01/2016)

Great Value (21/03/2016)

QUALITY! (03/08/2016)

This charging handle is easy in the hands. It is tough and easy to install. Works well with scoped weapons. Thank you Yankee Hill!

these work (01/11/2016)

Worth it (30/12/2016)

No Gunsmith Required (15/03/2017)

REAL DEAL HANDS DOWN (20/05/2017)

Good low cost high value upgrade (28/12/2017)

Read 10 more ratings on brownells.com

Customers also bought

BROWNELLS AR-15 A2 CHARGING HANDLE LATCH SPRING
AR-15 CHARGING HANDLE LATCH SPRING

BROWNELLS

In stock

£6.90 * £6.90 - £8.90*

Springs

BROWNELLS AR-15/M16 BOLT GAS RING
AR-15/M16 BOLT GAS RINGS

BROWNELLS

In stock

£5.90 * £5.90 - £6.90*

Gas Rings

BROWNELLS EXTRACTOR BUFFERS, 10-PAK
AR-15/M16 EXTRACTOR BUFFER

BROWNELLS

In stock

£19.90 *

🎯 Upgrade your AR-15 with the BCM MOD-3 Gunfighter Grip! Ergonomic design for better control & storage compartment for essentials. Shop now! 🔫🔒

BRAVO COMPANY MOD-3 GUNFIGHTER GRIP POLYMER BLACK
AR-15 MOD-3 GUNFIGHTER GRIP

BRAVO COMPANY

In stock

£25.90 * £25.90 - £28.90*

Pistol Grips

4.5

BROWNELLS LOW-PROFILE SLING ADAPTER
CAR-15/M4 LOW-PROFILE AMBIDEXTROUS SLING ADAPTER

BROWNELLS

In stock

£13.90 *

Tactical Sling Mounts

3.2

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: