United Kingdom
FORWARD CONTROLS DESIGN
AR-15 ENLARGED TRIGGERGUARD
35.9
36.9
3
GBP
Product no.: 100044419
FORWARD CONTROLS DESIGN AR-15 ENLARGED TRIGGERGUARD OD GREEN
Mfr Part: TGFWINTEROD 683828757457 TGF (Trigger Guard, Forward Controls) Winter, BLK is machined from 7075 aluminum and Type III anodized black, it does not have a spring-loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll pin in the rear. We retained the use of roll pin for TGF's rear, as it's reliable and robust, it also will not loosen. The front set screw is flush with the receiver and doesn't protrude. Both versions feature a canted front edge to make rocking the magazine into the mag well easier. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver's front trigger guard holes). The space to the rear of the trigger bow is inaccessible for the user's finger, so it's kept small and low. TGF is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard "ears" (note that TGF will not swing down like TDP spec trigger guards). All the sharp edges and corners have been removed. TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included). 7075 billet trigger guard for AR-15/M16 Enlarged space for gloved trigger finger Hard coat Type III anodized black Includes Set screw and roll pin Color: Black, FDE, or OD Green
FORWARD CONTROLS DESIGN AR-15 ENLARGED TRIGGERGUARD OD GREEN
Mfr Part: TGFWINTEROD 683828757457 TGF (Trigger Guard, Forward Controls) Winter, BLK is machined from 7075 aluminum and Type III anodized black, it does not have a spring-loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll pin in the rear. We retained the use of roll pin for TGF's rear, as it's reliable and robust, it also will not loosen. The front set screw is flush with the receiver and doesn't protrude. Both versions feature a canted front edge to make rocking the magazine into the mag well easier. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver's front trigger guard holes). The space to the rear of the trigger bow is inaccessible for the user's finger, so it's kept small and low. TGF is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard "ears" (note that TGF will not swing down like TDP spec trigger guards). All the sharp edges and corners have been removed. TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included). 7075 billet trigger guard for AR-15/M16 Enlarged space for gloved trigger finger Hard coat Type III anodized black Includes Set screw and roll pin Color: Black, FDE, or OD Green
Specs:
Finish: O.D. Green
Make: AR-15
Top takeaways
- The AR-15 Enlarged Triggerguard by Forward Controls Design LLC is machined from 7075 aluminum, anodized in OD Green, and designed for use with TDP spec forged lower receivers, enhancing durability and compatibility.
- It features a canted front edge for easier magazine insertion and an enlarged space to accommodate gloved fingers, with a set screw in the front and a roll pin in the rear for secure installation.
- This trigger guard is made in the USA and comes with the necessary installation hardware, excluding the 1/16 Allen wrench required for the set screw.
Attributes
Finish: O.D. Green Make: AR-15 Delivery weight: 0.027kg
Item details
Made in USA
US export classification: 0A501.x
US export classification: 0A501.x
Product no.: 100044418
FORWARD CONTROLS DESIGN AR-15 ENLARGED TRIGGERGUARD FDE
Mfr Part: TGFWINTERDE 683828757440 TGF (Trigger Guard, Forward Controls) Winter, BLK is machined from 7075 aluminum and Type III anodized black, it does not have a spring-loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll pin in the rear. We retained the use of roll pin for TGF's rear, as it's reliable and robust, it also will not loosen. The front set screw is flush with the receiver and doesn't protrude. Both versions feature a canted front edge to make rocking the magazine into the mag well easier. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver's front trigger guard holes). The space to the rear of the trigger bow is inaccessible for the user's finger, so it's kept small and low. TGF is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard "ears" (note that TGF will not swing down like TDP spec trigger guards). All the sharp edges and corners have been removed. TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included). 7075 billet trigger guard for AR-15/M16 Enlarged space for gloved trigger finger Hard coat Type III anodized black Includes Set screw and roll pin Color: Black, FDE, or OD Green
FORWARD CONTROLS DESIGN AR-15 ENLARGED TRIGGERGUARD FDE
Mfr Part: TGFWINTERDE 683828757440 TGF (Trigger Guard, Forward Controls) Winter, BLK is machined from 7075 aluminum and Type III anodized black, it does not have a spring-loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll pin in the rear. We retained the use of roll pin for TGF's rear, as it's reliable and robust, it also will not loosen. The front set screw is flush with the receiver and doesn't protrude. Both versions feature a canted front edge to make rocking the magazine into the mag well easier. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver's front trigger guard holes). The space to the rear of the trigger bow is inaccessible for the user's finger, so it's kept small and low. TGF is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard "ears" (note that TGF will not swing down like TDP spec trigger guards). All the sharp edges and corners have been removed. TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included). 7075 billet trigger guard for AR-15/M16 Enlarged space for gloved trigger finger Hard coat Type III anodized black Includes Set screw and roll pin Color: Black, FDE, or OD Green
Specs:
Finish: Flat Dark Earth
Make: AR-15
Product no.: 100044417
FORWARD CONTROLS DESIGN AR-15 ENLARGED TRIGGERGUARD BLACK
Mfr Part: TGFWINTERBL 683828757433 TGF (Trigger Guard, Forward Controls) Winter, BLK is machined from 7075 aluminum and Type III anodized black, it does not have a spring-loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll pin in the rear. We retained the use of roll pin for TGF's rear, as it's reliable and robust, it also will not loosen. The front set screw is flush with the receiver and doesn't protrude. Both versions feature a canted front edge to make rocking the magazine into the mag well easier. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver's front trigger guard holes). The space to the rear of the trigger bow is inaccessible for the user's finger, so it's kept small and low. TGF is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard "ears" (note that TGF will not swing down like TDP spec trigger guards). All the sharp edges and corners have been removed. TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included). 7075 billet trigger guard for AR-15/M16 Enlarged space for gloved trigger finger Hard coat Type III anodized black Includes Set screw and roll pin Color: Black, FDE, or OD Green
FORWARD CONTROLS DESIGN AR-15 ENLARGED TRIGGERGUARD BLACK
Mfr Part: TGFWINTERBL 683828757433 TGF (Trigger Guard, Forward Controls) Winter, BLK is machined from 7075 aluminum and Type III anodized black, it does not have a spring-loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll pin in the rear. We retained the use of roll pin for TGF's rear, as it's reliable and robust, it also will not loosen. The front set screw is flush with the receiver and doesn't protrude. Both versions feature a canted front edge to make rocking the magazine into the mag well easier. The winter version has as much constant/unchanged space from the trigger bow forward as possible (instead of the space inside tapering and decreasing as the trigger guard nears the receiver's front trigger guard holes). The space to the rear of the trigger bow is inaccessible for the user's finger, so it's kept small and low. TGF is designed for use with TDP spec forged lower receivers, and fills the gap forward of the pistol grip, between the trigger guard "ears" (note that TGF will not swing down like TDP spec trigger guards). All the sharp edges and corners have been removed. TGF is proudly designed and made in the USA. A trigger guard roll pin and set screw (for the front) are included. A 1/16 Allen wrench is required (not included). 7075 billet trigger guard for AR-15/M16 Enlarged space for gloved trigger finger Hard coat Type III anodized black Includes Set screw and roll pin Color: Black, FDE, or OD Green
Specs:
Finish: Black
Make: AR-15
🔫 Upgrade your AR-15 with the OD Green Enlarged Trigger Guard from Forward Controls Design. Durable 7075 aluminum for easy use with gloves. Learn more! ✨
Customer Promise
Our promise to you
The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.
If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.
Trade Associations:
Welcome!
Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!
If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.
Your Brownells UK Team
Trade Associations:
*
Prices inclusive of duty & VAT.
© 2024 Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories
Classical view
Mobile view
Newsletter