Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

SINCLAIR INTERNATIONAL
ACTION CLEANING TOOL KIT

749003115
The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
8.9 54.9 7 GBP
Product no.: 749003115
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL
Mfr Part: ACT1 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
29.9 GBP 0 £29.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Top takeaways

  1. The Sinclair International Bolt Action Cleaning Tool Kit is designed to clean the neglected locking lug recess area on bolt action rifles, which can accumulate brass chips, brush bristles, primer residue, and solvents.
  2. The kit includes a lug recess tool for the locking lug area, a chamber swab with handle for the chamber, and a double-headed bolt brush for the bolt lugs, face, and body.
  3. Both the Lug Recess Tool and Swab Handle are made of durable stainless steel for long-term use, and the kit provides felts and cotton rolls for cleaning, with the option to purchase tools individually.

Attributes

Delivery weight: 0.136kg

Item details

Made in USA



Product no.: 749000179
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL FELTS 5 PACK
Mfr Part: ACT3 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
8.9 GBP 0 £8.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Quantity: 5
Product no.: 749000185
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL COTTON ROLLS 50 PACK
Mfr Part: 8969286 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
12.9 GBP 0 £12.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Product no.: 749000222
SINCLAIR INTERNATIONAL NEW STYLE ACT HANDLE
Mfr Part: ACT6 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
11.9 GBP 0 £11.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Product no.: 749000729
SINCLAIR INTERNATIONAL KIMBER/SMALL SAKO ACTION CLEANING TOOL HEAD
Mfr Part: ACT5 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
13.9 GBP 0 £13.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Product no.: 749001367
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL SWAB HANDLE
Mfr Part: ACT0 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
17.9 GBP 0 £17.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.
Product no.: 749004651
SINCLAIR INTERNATIONAL BOLT ACTION CLEANING TOOL KIT
Mfr Part: ACT2 050806110915 The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
54.9 GBP 0 £54.90 *
Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

🔫 Keep your rifle in top condition with the Sinclair International Bolt Action Cleaning Tool Kit. Perfect for cleaning lug recesses, chambers & bolts. Shop now! 🛒

The locking lug area on most bolt action rifles has a tendency to collect brass chips from cases, brush bristles, primer residue, bolt lug grease, and solvents. This accumulation of debris can wear heavily on your bolt lugs. Our lug recess tool should be used routinely by every rifle owner to clean this neglected and hard to reach area. Lug Recess Tool - Specifically for cleaning the locking lug recess area. Use with felts or cotton rolls. Chamber Swab and Handle - For cleaning and drying the chamber. 8-32 threads for large bore mops. Bolt Brush - Double headed brush to scrub the bolt lugs, bolt face, and bolt body. The lug recess tool has a slotted head that accepts cleaning felts and cotton rolls (supplied with the tool). This tool is inserted into the action and rotated inside the lug recess areas. Solvent can be applied to the felts or cotton to remove debris. A dry felt or cotton roll can then be used to dry the area out. The chamber can then be wiped out with the swab handle and mop. The bolt should be sprayed down with a degreaser and scrubbed with the double-headed brush. Be sure to apply new grease to the bolt on the bearing surfaces of the bolt. The bolt shroud should also be routinely cleaned and re-greased. The Lug Recess Tool and Swab Handle are both made of stainless steel for a lifetime of use and can be purchased individually.
In stock
£9.90 *
3
In stock
£16.90 * £14.90 - £22.90*
3.7
Newsletter