A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going into the cylinder - a real problem when using speedloaders. Cure both problems with this cutter.
SPECS: Cutter - 3-1/4" (8.25cm) long (except .17 caliber cutter - 2-3/8" (6cm) long). 1/2" (12.7mm) or 5/8" (15.8mm) diameter.
More...
Customer ratings for BROWNELLS 45 17 CALIBER 1/2" CHAMFER CUTTER ONLY
Number of ratings: 2
From brownells.com: 2
Average rating: 3
pilot hole too large(05/11/2016)
The pilot hole is too large for the .17 cal pilots. The pilot must be shimmed with wraps of .001" stock until proper fit is attained. Only then can a nice cut be made. There is apparently a miscommunication between the pilot and cutter maker. My cutters and pilots for calibers 22 and up all fit together tightly.
45°, 5/8" Chamfering Cutter (04/06/2016)
Used this with Brownells .45 BBL. Revolver Muzzle Brass Pilot (#080-944-450) to re-crown my S&W 625PC. The brass pilot measured .4405" diameter which was a good fit for my bore (.443") diameter. The Cutter's diameter (5/8") was a good match on the guns I used it on (S&W 625, 627, & 686). The last one I used it on left chatter marks/ripples. Not sure why as it cut the others smoothly. (Hope it's not getting dull already?) Purchase Brownells Facing & Chamfering Cutter Handle (#080-589-000) to use these together.
Product no.: 080588453 BROWNELLS 45 17 CALIBER 1/2" CHAMFER CUTTER ONLY050806017245 A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going into the cylinder - a real problem when using speedloaders. Cure both problems with this cutter.
A damaged or poorly-cut muzzle can really hurt accuracy; sharp edges on revolver cylinder chamber mouths can cause rounds to hang up going into the cylinder - a real problem when using speedloaders. Cure both problems with this cutter.
SPECS: Cutter - 3-1/4" (8.25cm) long (except .17 caliber cutter - 2-3/8" (6cm) long). 1/2" (12.7mm) or 5/8" (15.8mm) diameter.
More...
Customer ratings for BROWNELLS 45 17 CALIBER 1/2" CHAMFER CUTTER ONLY
Number of ratings: 2
From brownells.com: 2
Average rating: 3
pilot hole too large(05/11/2016)
The pilot hole is too large for the .17 cal pilots. The pilot must be shimmed with wraps of .001" stock until proper fit is attained. Only then can a nice cut be made. There is apparently a miscommunication between the pilot and cutter maker. My cutters and pilots for calibers 22 and up all fit together tightly.
45°, 5/8" Chamfering Cutter (04/06/2016)
Used this with Brownells .45 BBL. Revolver Muzzle Brass Pilot (#080-944-450) to re-crown my S&W 625PC. The brass pilot measured .4405" diameter which was a good fit for my bore (.443") diameter. The Cutter's diameter (5/8") was a good match on the guns I used it on (S&W 625, 627, & 686). The last one I used it on left chatter marks/ripples. Not sure why as it cut the others smoothly. (Hope it's not getting dull already?) Purchase Brownells Facing & Chamfering Cutter Handle (#080-589-000) to use these together.