Your basket is empty.

Basket

01788 815115

Newsletter

LONE WOLF DIST.
3.5 CONNECTOR for GLOCK®

639737068276 100006204

Description
Ratings (16)

Smoothes Trigger Pull, Aids In Faster Reset

Drop-in replacement connector gives an immediate improvement in trigger performance on Glock a pistol. Provides the same 3.5 lb. trigger pull as the factory connector, but its 25% lighter weight and a highly polished, nickel-plated surface makes the pull smoother and more consistent. Helps the trigger reset more quickly for faster follow up shots and less temptation to jerk the trigger and compromise accuracy. Requires no permanent alterations to pistol, so factory connector can be reinstalled any time. Use in conjunction with Lone Wolf Ultimate Trigger Stop (available separately) for an even cleaner pull. Does not work with Glock 42/43

SPECS: Steel, nickel plated, high-polish finish.

More...

Customer ratings for LONE WOLF DIST. 3.5 CONNECTOR FOR GLOCK

Number of ratings: 16
From brownells.com: 16
Average rating: 4.1

Very Pleased (15/08/2011)

I call this the best 3.5lb connector for the price. This and the Ghost Ultimate are the only 3.5lb connectors that keep 'mush' to a minimum and are smooth from the git-go. Nice smooth take-up with clean ramp-up....and then the break. Best improvement for the money that can be made on a Glock. This and a Wolff 6lb (XP) trigger spring and you're sittin' pretty. I don't know of another gun aside from a Glock where you can spend SO LITTLE and get such an enormous improvement in return. Buy with Confidence. I've given two as gifts already. :)

Oh, and despite the naming, in a gen3 Glock, this will give you just below a 5lb trigger pull. Ad a Wolff XP trigger spring and you'll be just above 4lb on the trigger pull weight. On a gen4, this will bring you to about ~5.5lb. Add the Wolff XP trigger spring and you'll be just under 5lbs.

LWD Connector (21/08/2011)

Great trigger pull and excellent reset.

Sports and plinking only (26/12/2011)

I had 4 or 5 such connectors during few years.
It's ok,makes light trigger pull and short reset.
The trouble is - with a lot of ammo spend, you have opportunity to get a full auto Glock in your hands.
Had this in G19 and two G17.
It's not exactly f\a, but accidential double taps happens from time to time.

Great product (30/01/2012)

The geometry is almost exactly like that of the factory "-" connector. No mush and feels the same as the factory at a fraction of the price. This is the fourth aftermarket connector I have tried and the only one I have kept. Great for IDPA, USPSA, 3-Gun and Steel Challenge. I have carried it and felt confident with it.

One for every Glock in the safe (06/02/2012)

The Glock pistol is great right out of the box. I found that the feel of the trigger press on my Glock's could use some improvement and this does the trick. You can feel a noticeable difference in the weight of trigger press and snappier reset. I am very happy with this setup in all of my pistols.

3 minute trigger job (13/02/2012)

This connector improved the trigger immediately. It really improves accuracy and trigger control. Another improvement is comfort on my old trigger finger. The stock connector caused trigger pinch and soreness after shooting. Was putting bandaid on trigger before shooting to stop irritation. No more bandaid or irritation.

Great product to improve Glock triggers! (16/08/2012)

Combined with a NY1 trigger spring this connector creates a great trigger pull that is firm and smooth all the way through, eliminating the mushiness felt with the coil trigger spring.

Helped my trigger pull!!! (19/03/2013)

I had a brand new Glock 21SF with a very heavy trigger pull. I removed the factory connector and replaced it with this one and could not be happie. It lightened my trigger pull by several pounds. As with any Glock part it was easy to replace.

Super Smooth (02/06/2013)

This is the best product for the money you can spend on your Glock. I bought two of these (one for personal, and one for duty). It takes the harsh trigger reset (I didn't realize how harsh until I replaced it) and smooths it out. It's an easy install taking less than five minutes, and I should have done this a long time ago.

More than worth it (09/09/2013)

We put in a few every week, they are the easiest and cheapest upgrade for a glock. Generally lands you around 4.5lbs, and cleaner than factory. No permanent modification or fitting required, done in under 2 minutes.

great trigger with additional parts (06/11/2014)

I bought this after feeling a friends Glock with it. It really helps to smooth out the trigger. It is better if a spring kit (Ghost) and a striker plunger (including lighter spring) that is smoothed is also installed with the connector. I was hoping for a better trigger stop, but after installing and doing more research I discovered the connectors with an altered trigger stop/shallow trigger reset are fitted. I did polish the trigger bar with some super fine sand paper and a stone where it connects (rides) on the connector. it made a smoother trigger pull doing the polishing on the trigger. If you are not comfortable with fitting gun parts and don't have the patience to do so, then the Lone Wolf is for you. I would not install it without the smoothed out plunger with a lighter weight spring on it though. I feel it makes a considerable difference by adding the spring and plunger. However, the connector alone does make for a better trigger on the Glock considering the price of the part it is well worth the money.

Dazed and Confused (16/04/2015)

Looks good, polished nice & installed in minutes. I've heard good things about "Lone Wolf" connectors... however. Maybe I received one that was made late afternoon on Friday.

I'm no expert, but have been in Law Enforcement for over thirty years and very familiar with numerous makes and models of hand guns. After installing the connector in a G36 I noticed a smoother pull, but very little reduction during a function check. During the next eight to ten cycles I did notice a slight improvement. Somewhere between ten and twenty cycles, my trigger failed to re-set. I charged the weapon again and the trigger re-set. I disassembled & reassembled to insure there was not an issue with he installation. Again the trigger would sporadically fail to re-set. I will be trying a Double Diamond or ZEV Industries connector. No confidence in the Lone Wolf.

Unsafe...downright dangerous! (13/05/2015)

I bought 8 of these recently. Trigger pull was over 5 lbs. I called Brownells and was told they'd send a replacement for the one, and suggested I try others to see how they performed. I objected to this, but decided to do so later in the day.

I have installed several of them now. Each one has been different! None have been repeatable. Three in my own Glocks two in my son's Glocks. Trigger pull was reduced to varying degrees, none under 4.5 lbs. One would not let the gun fire at all. That one is my oldest, an early G17 that had a 3.5 connector in it already performing flawlessly for all these years. I put the old one back in and all is back to normal with a 5+ lb pull weight.

I then installed one in my G20 and got striker fall (firing) upon trigger return with almost most every time fired. (Thankfully, I did not have ammo in the gun then!) Again I returned the one I had removed and got back to normal. I then tried another of the LWD ones and had no trouble (and no improvement in pull).

So far I've had more issues than successes with these connectors. Bad batch? Don't know. I await the one coming and will give that a try.

So far I'm very concerned about using LWD connectors....in my Glocks or in customer guns.

Last night I installed one in a customer's Glock 19. Measured pull before and after. Dry fired it several times and had no other issues, so I felt OK letting it go out. Pull was reduced from 5 3/4 down to 4.5 lbs. He was mildly happy. Added the Wolf trigger spring and it was no lighter, but felt to us like it was somewhat "better". He left happy enough.

As a life-long target shooter and gun crank, I'm disappointed in this performance. Did not deliver the expected trigger pull reduction, and was not consistent nor even safe in way too many trials.

Easy Upgrade (05/01/2016)

Dropped this into my Gen 1 G17 and I could immediately feel the difference in the trigger pull. I am amazed at how this little piece of metal can make such a difference.

Easy to install, but poor results. (29/10/2016)

I installed this on a Gen 3 Glock 22. The trigger is a bit lighter (not even close to 3.5 lbs), but it has a spongy feeling, lots of creep and more over travel than I expected. I even installed the spring kit.

As a comparison, I installed a Ghost connector in my Glock 43. No springs or gunsmithing. Much better results.

I'll probably junk this connector and go a different route... Waste of time and money. I gave it 2 stars instead of one, because it did lighten the trigger some.

About 80% of what I am looking for (20/01/2018)

I have tried a number of different connectors on my G17 GEN5, G40 GEN4 and G43 GEN4. The LWD 3.5 lbs., the OEM Glock (-) and (.) connectors.

The take up and break on the Ghost Edge 3.5 lbs. connector are great and I replaced the OEM Glock (-) connector in my G40 with this one. I wish the take up could still be shorter, but with standard Glock trigger geometry this is about as good as it gets. I installed the LWD 3.5 lbs. connector in my G17 GEN5. This LWD 3.5 lbs. connector and the Ghost Edge 3.5 lbs. are the best drop in connectors I have tried. The Ghost Edge has the best take up of both and is super smooth. I wouldn't want it to be any lighter or it would be too light for carry and self defense. The take up of the LWD is not as smooth and requires more pull than the Ghost Edge. One characteristic where the LWD shines over the Ghost is the reset. It has by far the shortest and crispest reset and much better than the Ghost. If LWD could combine the pull and smoothness of the Ghost Edge with the reset of their LWD 3.5 lbs. it would be by far the very best connector of all there are. I would definitely recommend it as it is, but maybe LWD engineers are reading these reviews. In the end I would chose this one over the Ghost because reset is more important than pull and break to me.

Read 16 more ratings on brownells.com

27.9 27.9 1 GBP

Product no.: 100006204
LONE WOLF DIST. 3.5 CONNECTOR FOR GLOCK
Mfr Part: LWD342 639737068276 Drop-in replacement connector gives an immediate improvement in trigger performance on Glock a pistol. Provides the same 3.5 lb. trigger pull as the factory connector, but its 25% lighter weight and a highly polished, nickel-plated surface makes the pull smoother and more consistent. Helps the trigger reset more quickly for faster follow up shots and less temptation to jerk the trigger and compromise accuracy. Requires no permanent alterations to pistol, so factory connector can be reinstalled any time. Use in conjunction with Lone Wolf Ultimate Trigger Stop (available separately) for an even cleaner pull. Does not work with Glock 42/43

27.9 GBP 0 £27.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Make: Glock Model: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Improves trigger performance with a smoother, more consistent 3.5 lb pull.
Easy drop-in installation without permanent alterations, reversible to factory connector.
Not compatible with Glock 42/43; can be paired with Lone Wolf Ultimate Trigger Stop.

Attributes

Make: Glock Model: Universal Handguns Delivery weight: 0.005kg

Item details

Made in USA
US export classification: 0A501.x

Upgrade your Glock with the LONE WOLF DIST. 3.5 Connector for a smoother 3.5 lb trigger pull 🎯. Experience consistent shots and quick resets. Shop now for enhanced precision! 🔧✨

Description
Ratings (16)

Smoothes Trigger Pull, Aids In Faster Reset

SPECS: Steel, nickel plated, high-polish finish.

More...

Customer ratings for LONE WOLF DIST. 3.5 CONNECTOR FOR GLOCK

Number of ratings: 16
From brownells.com: 16
Average rating: 4.1

Very Pleased (15/08/2011)

LWD Connector (21/08/2011)

Great trigger pull and excellent reset.

Sports and plinking only (26/12/2011)

Great product (30/01/2012)

One for every Glock in the safe (06/02/2012)

3 minute trigger job (13/02/2012)

Great product to improve Glock triggers! (16/08/2012)

Combined with a NY1 trigger spring this connector creates a great trigger pull that is firm and smooth all the way through, eliminating the mushiness felt with the coil trigger spring.

Helped my trigger pull!!! (19/03/2013)

Super Smooth (02/06/2013)

More than worth it (09/09/2013)

great trigger with additional parts (06/11/2014)

Dazed and Confused (16/04/2015)

Unsafe...downright dangerous! (13/05/2015)

Easy Upgrade (05/01/2016)

Dropped this into my Gen 1 G17 and I could immediately feel the difference in the trigger pull. I am amazed at how this little piece of metal can make such a difference.

Easy to install, but poor results. (29/10/2016)

About 80% of what I am looking for (20/01/2018)

Read 16 more ratings on brownells.com

Customers also bought

WOLFF COMPETITION PAK FOR GLOCK®
TRIGGER GROUP COMPETITION PAK for GLOCK®

WOLFF

In stock

£13.90 *

Performance Enhancing Kits

3.8

GHOST COMPLETE SPRING KIT
COMPLETE SPRING KIT for GLOCK®

GHOST

In stock

£15.90 *

Trigger Springs

4.5

LONE WOLF DIST. EXTENDED SLIDE LOCK LEVER FOR GLOCK®
EXTENDED SLIDE LOCK LEVER for GLOCK®

LONE WOLF DIST.

In stock

£16.90 *

Slide Catches

GHOST 3.5 TRIGGER CONNECTOR

GHOST

In stock

£19.90 *

Connector Parts

ZEV TECHNOLOGIES STD. STRIKER SPRING
TRIGGER UPGRADE COMPONENTS for GLOCK®

ZEV TECHNOLOGIES

Reordered

£12.90 * £9.90 - £21.90*

Trigger Springs

3.3

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: