Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories United Kingdom

J P ENTERPRISES
308 AR ENHANCED HIGH PRESSURE BOLT COMPLETION GROUP

812872020730 452000165
For anyone using .308/7.62 AR-type rifles, it is common knowledge that many factory rounds exhibit excessive primer flow and/or ejector smear. At its core, this is a result of ammo development being done by manufacturers only for manual platforms without testing in semi-auto platforms. Some rifle manuals even record the maximum recommended load data beyond the functional range of these rifles. Unfortunately, these issues will persist until the manufacturers of ammunition realize that an AR platform requires a unique pressure curve to allow for both accuracy and reliability. Manufactured to the exacting standards of our standard bolt offerings, the High Pressure EnhancedBolt™ design represents a giant leap forward in alleviating the problems traceable to over-pressured loads—namely primer flow, ejector smear, extraction issues, and ignition reliability. In combating these problems, this new bolt design opens up a much broader range of ammunition compatibility and load density in the AR .308/7.62 and other variants such as 6.5mm or 6mm calibers in this platform. Complete bolt assembly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. SAE 9310 steel has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. Meticulously machined radiuses on all 90-degree corners on the locking lugs help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling.

SPECS: SAE 9310 nickel-chromium-molybdenum steel, chromium nitride. Fully assembled with extractor, gas rings, ejector, pins, and springs installed. .308 fits DPMS/AR-10 Style rifles.

304.9 304.9 1 GBP
Product no.: 452000165
J P ENTERPRISES 308AR HP BOLT COMPLETION GROUP
Mfr Part: JPBCEB308HP 812872020730 Complete bolt assembly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. SAE 9310 steel has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. Meticulously machined radiuses on all 90-degree corners on the locking lugs help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling. The "High Pressure" 308 Bolt features an improved extractor, smaller diameter firing pin (to prevent primer flow in high pressure loads), and an entirely modified design to improve strength and reliability. Bolts are available individually, or in a completion group, which includes the bolt, firing pin, cam pin and firing pin retaining pin. Available caliber 308.
304.9 GBP 3 £304.90 *
Is a 'Call to order' product.
Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse
Specs: Cartridge: 308 Winchester Finish: Black DLC Make: AR .308

Restrictions

  • Is a 'Call to order' product.

Top takeaways

  1. The 308 AR Enhanced High Pressure Bolt Completion Group is made from SAE 9310 steel alloy for increased durability and a service life of up to 60,000 rounds.
  2. Designed with improved extractor and smaller diameter firing pin to handle high pressure loads, ensuring strength and reliability in high-impact conditions.
  3. Comes as a complete assembly including bolt, firing pin, cam pin, and firing pin retaining pin, specifically for .308 caliber AR-10 style rifles.

Description

Complete bolt assembly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. SAE 9310 steel has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. Meticulously machined radiuses on all 90-degree corners on the locking lugs help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling. The "High Pressure" 308 Bolt features an improved extractor, smaller diameter firing pin (to prevent primer flow in high pressure loads), and an entirely modified design to improve strength and reliability. Bolts are available individually, or in a completion group, which includes the bolt, firing pin, cam pin and firing pin retaining pin.   Available caliber 308.

Attributes

Cartridge: 308 Winchester Finish: Black DLC Make: AR .308 Delivery weight: 0.045kg

Item details

Made in USA
US export classification: 0A501.c



🔩 Upgrade your AR .308 with J P Enterprises' High Pressure Bolt Completion Group! Precision-crafted for up to 60,000 rounds. Get unmatched durability now! 🔥

For anyone using .308/7.62 AR-type rifles, it is common knowledge that many factory rounds exhibit excessive primer flow and/or ejector smear. At its core, this is a result of ammo development being done by manufacturers only for manual platforms without testing in semi-auto platforms. Some rifle manuals even record the maximum recommended load data beyond the functional range of these rifles. Unfortunately, these issues will persist until the manufacturers of ammunition realize that an AR platform requires a unique pressure curve to allow for both accuracy and reliability. Manufactured to the exacting standards of our standard bolt offerings, the High Pressure EnhancedBolt™ design represents a giant leap forward in alleviating the problems traceable to over-pressured loads—namely primer flow, ejector smear, extraction issues, and ignition reliability. In combating these problems, this new bolt design opens up a much broader range of ammunition compatibility and load density in the AR .308/7.62 and other variants such as 6.5mm or 6mm calibers in this platform. Complete bolt assembly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. SAE 9310 steel has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. Meticulously machined radiuses on all 90-degree corners on the locking lugs help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling.

SPECS: SAE 9310 nickel-chromium-molybdenum steel, chromium nitride. Fully assembled with extractor, gas rings, ejector, pins, and springs installed. .308 fits DPMS/AR-10 Style rifles.