Your basket is empty.

Basket

01788 815115

Newsletter

ED BROWN
1911 MAINSPRING HOUSING

800732816005 087113100

Description
Ratings (53)

Traditional Shapes Plus Different Surfaces Let Every Shooter Get Their Favorite Grip Feel

Classic and contemporary looking mainspring housings combine form and function, so there is no compromise in grip control even though they look great. Flat shaped housings are available with popular 25 lpi checkering preferred by many shooters, as well the latest Snakeskin, Chainlink, and Chainlink II patterns that provide a secure gripping surf ace without the “sharpness” of machine cut checkering. Because they won’t abrade your hand or clothing, they make the perfect addition to competition, carry, and tactical guns. Some Chainlink models are also available with integral lanyard loop for attaching a weapon retention device. Traditional, Arched housing rides high in the heel of the hand to keep it close to the bore for minimal muzzle rise and excellent recoil control, and is available with a Grooved surface to provide a firm grip with little drag on clothing. Blank models are completely smooth to allow custom checkering or engraving, and are available in flat shapes. Also available for the Officer’s model in both blued and stainless steel with 25lpi checkering.

SPECS: Steel, blued or stainless steel (SS) natural finish. The Government Model housing features drop-in installation in all full-size 1911 pistols including full size Para-Ordnance pistols such as the P-14 and P-16. All housings will work great with any finish or type of steel, including aluminum.

More...

Customer ratings for ED BROWN BL/FL FITS GC - BLANK

Number of ratings: 53
From brownells.com: 53
Average rating: 4.5

Perfect fit & finish! No fitting needed! (11/10/2017)

I installed the Chainlink III mainspring housing in my Rock Island Standard CS. It required no fitting at all, and dropped right in. Fit and finish matched nicely to the rust bluing I performed on the pistol. I looked at several different mainspring housings, and I'm glad I ended up going with this one.

I have a Colt XSE Lightweight and a Para GI Expert that I ordered a couple other Ed Brown mainspring housings for. I hope they drop in like this one did, but I understand some fitting is normal. The Chainlink III gives a nice positive grip feel in hand too.

I would not hesitate to buy another one of these in the future, and I would absolutely recommend this to someone looking to replace a mainspring housing

<img width="500" src='/userdocs/reviewimages/80ed3f63-7e73-4ce5-8d15-07faa20067bc.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/fc5ff1ee-2a27-448e-b939-82981734c7f2.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/960c1be3-2529-4f26-abe6-83fb0fee8358.jpg' alt=''>

Won't Fit Colt Defender (07/03/2016)

First the pin hole had to be slotted to the rear .045. Then the ledge on the front face (by the frame) had to be shortened by the same amount to clear the bottom of the sear spring. It would now fit into place. Then .030 had to be milled off of the bottom to make it flush with the bottom of the frame. Then it went into the garbage can.

Ed Brown Officer's Main Spring Housing (06/03/2018)

Quality built product. No fitting required on my Colt Defender .45 ACP. Easy to install (you have to use the spring assembly from your existing main spring housing). Grip and feel is now 100% better then with the (junk plastic) factory main spring housing, and it also looks way better, too. No complaints at all. As usual, fast shipping from Brownell's. Thanks!

Perfect fit in my Kimber Warrior (23/03/2013)

I wanted to put some stainless accents on my Kimber Warrior. This MSH fit in perfectly with no filing or fitting required. You will need to either disassemble your MSH that you are replacing or get the 1911 Auto Rebuild Kit that contains the mainspring cap, mainspring cap pin, mainspring housing retainer, and the spring.

Perfectly machined (20/01/2011)

This is a perfectly machined part to use a replacement for the plastic MSH that most newer pistols come with. Mine dropped in with zero fitting required and used the OEM guts. It looks perfect and the chainlink is actually more grippy that I had anticipated (which is nice). This part mirrors my experience with other Ed Brown parts - excellent.

SS/FL fits GC - Chainlink (04/10/2011)

i ordered the MS on Friday and received it on monday! wow, best shipping! now that said, for the MS chainlink by ED BROWN what can you say bad about it? NO fitting required, dropped right in to my RIA gov. looks outstanding from my view point. you can't going wrong with Mr. ED BROWN parts!!

Fits Perfect No Wiggle (28/10/2011)

Excellent bright finish. Really brings my 1911 out. Very happy with my purchase.

Looks GREAT on Kimber Raptor Series (06/09/2012)

The EB chainlink MSH looks right at home on my Kimber Grand Raptor II. It fit perfectly and the quality is superb. The 2 "tangs" at the very top of the Ed Brown MSH are much thicker than the tangs on the stock Kimber MSH. Out of the box, the Ed Brown held my grip safety depressed enough to deactivate it (due to the thicker tangs). A little bit of careful filing on the tangs fixed it.

I also chose to progressively sand the plunger bore in the MSH to smooth it out. There was a good bit of rough machining marks in there out of the box which contributed to a ridgy feel when cocking the hammer. Don't forget to clean out and grease the plunger bore before you reassemble.

Overall i'm very satisfied with the quality, looks, and fit of this MSH. Just remember to function check your grip safety after the install. You may or may not have to file back the tangs on the new MSH, every 1911 is different.

In stock as usual (11/05/2014)

Im finding myself checking your stock on items before checking gun makers(Kimber,ed brown,TROY,ect.) stock or availability.I usually have better luck with stock and service,
THANKS!!

excellent replacement msh (04/09/2010)

this is a replacement for the factory (plastic) kimber msh. the fit and finish of it is excellent. added weight is comforting during shooting and the chainlink cut is 'gentler' on the hands and yet, more 'grippy' than the original msh.

while it does just 'drop in,' some fitting may be required due to the kimber's schwartz safety. nothing too major...something you can do at home.

perfect fit (21/11/2010)

exc. piece of work,finish is fantastic

Perfect fit on a Springfield! (24/06/2011)

This is a very nice piece as are all of Ed Brown's stuff.It fit my Springfield GI like a glove and helped me get rid of the ILS,California lawyer friendly factory msh.Paired nicely with a S&A grip safety and gives great purchase without snagging on clothes like checkering.Very much a quality piece.Thanks Brownells!

Love it! (27/08/2011)

Perfect. It fit my S.A. G.I. perfectly and got rid of the ILS system.

perfect fit (15/03/2012)

Was a perfect fit in my kimber raptor 2. I was worried I might have to do some fitting being it is out of kimbers custom shop and everything is a tight fit but slid right in. Looks nice and fits well in my hand, feels just a tiny bit fuller on the palm.

Nice look that make your 1911 special (17/12/2012)

I installed this on a New gun that I was comp;ltey rebuilding. It fits great and has a nice finished look against the beavertail safety that I installed a 1911 AUTO BEAVERTAIL GRIP SAFETY from Brownell's and the two look like they were fitted for a factory tight fit. They should be cleaned out in the hole where the main spring and pins go in. I clean All of mine as there was a lot of crud effecting the feel of the hammer depressing the mainspring through the strut.

great piece. (04/01/2013)

this MSH was a great addition to my norinco 1911A1. it fit much better than the stock one and gives my pistol the perfect grip for me. very easy to install with no fitting required.

perfect (19/05/2015)

fit my springfield armory 1911 g.i. perfectly. absolutley no fitting was required. took a whole 3 minutes to swap out the old mainspring housing with the new one. worth every penny. plus, recieved two days early! great shipping! thanks brownells!

Fit perfect (04/05/2012)

This is my third 817-ARCH stainless, they all fit perfectly, looks great and improves my grip, I have one on my custom built Caspian,Colt Combat Elite and this one is for my Colt Combat Commander

Read before buying (16/08/2013)

I bought a blued Ed Brown arched MSH for a Colt Commander about a month ago and it was perfect. I just bought the stainless version for a Ruger SR 1911 Commander. It should have been a carbon copy of the blued model (Like the ad shows) but it is not. There is a very large bevel at the base of the new and improved model that causes the frame to poke out at each side of the base. When I called Ed Brown about it - the tech told me I would have to modify my frame to fit their part because that is how they make them now. These used to be my go-to part for carry guns but not any more. THESE ARE NO LONGER A DROP-IN FIT. I'll include a picture so you can see what I mean.

No Good (01/04/2014)

My review is exactly like Bob from Orange county below. I also bought a blue one before and it was great and fit perfectly. For all I know the blue ones might still be perfect, but the SS ones definitely do not fit. I bought it any way after reading Bob's review thinking that perhaps it was his gun or maybe Ed Brown fixed their style back to the old style. But no. The beveled rear bottom seems to be the new thing and that is that. They do not fit on a standard Springfield frame. It leaves the sharp points noted in Bob's great pics. I would post pics but they are the same.

It's a shame because the overall fit and finsih is far superior to any other MSH I have seen. But if it don't fit right then it don't fit right. And shooting with those sharp points would be terrible.

If Ed Brown decides to go back to the correct shape then I will buy a few of them. But until then it seems that the far inferior quality S&A is the only game in town for an arched SS housing.

Springfield Milspec upgrade (09/10/2014)

Unlike previous reviews where folks had problems with the fit of this part, it fits perfectly for me. I replaced the factory arched msh on a 2012 built springfield armory milspec stainless. The bevel on the base of the new msh fits very well to the frame of my gun. The gun frames corners are set in just a touch and do not protrude as previous reviewers' had. It was a drop in part for me. Smooth fitting in the frame, no play and cleared the grip safety perfectly. The grooves are deep and the ridges are sharp enough to afford a solid grip, without being too sharp to be uncomfortable. Seems well made to me, and worked perfectly on my new gun. The bevel on the base of mine seems lesser than the picture below, so maybe they changed their design.

Arched Pro. (05/11/2014)

Perfect fit on Kimber TLE Pro II! No modifications needed. Profile looks like it was made just for this pistol.

This cured a problem I had with this pistol shooting to low/right of center of mass.

Perfect Fit - Springfield Mil Spec (09/11/2014)

Ed Brown mainspring housings are my go to when swapping out the ILS version that comes with any 1911 from Springfield. Blued or stainless.

The part I received is as pictured. The geometry is as exactly as any I have purchased in the last 5 years be it a blued or stainless arched mainspring housing from Ed Brown.

The part I received was as usual a prefect fit. No fitting required, dropped right in on my Springfield...but that could vary dependent upon brand. I know these fit perfect on Colt's as well. Other brands I can't say for certain.

As to the 1 star reviews below. I can't say for sure what happened. I know the part I received is as exactly as pictured in the product description. It DOES NOT have any bevel at the base of the housing as Bob's review did below.

I can only speculate at this point what happened on the 1 star reviews. Maybe Ed Brown had a mis-machined batch of housings that went out late last year through early this year with that bevel. Or...they received enough complaints that they went back to the standard dimensions. Again, just speculating.

As to the the Ed Brown rep Bob spoke to and said "that's how they're made now." May have been true at the time, but as may of us know phone techs will tell you anything to get you off the phone due to not caring or sheer ignorance.

I'm sorry two of the reviewers had a negative experience with this part. My experience been exactly opposite in this case. Again, the part I received is as exactly as pictured in the product description and couldn't be more pleased with the fit and quality. I think it's probably safe to say now...buy with confidence. I purchased this part on 11-4-14...so it's highly unlikely it was old stock.

Perfect Fit - Springfield Loaded (23/10/2015)

I am one of the guys below that gave a bad review because the part did not fit due to the shape/bevel at the bottom and the way it fit to the frame leaving 2 bad points that dug into your hand.

After reading the more recent reviews that state that the parts shape has been changed and now fits a Springfield fine I decided to try again as my blue arched Ed Brown fits perfect.

Well I can confirm now that they must have changed the shape back to the original shape and bevel because it fits my Springfield Loaded model perfectly now. No points! Fits like a glove and looks and feels great. Top quality part.

Ed Brown Mainspring Housing (27/04/2016)

The stripped mainspring housing arrived in a timely fashion, as is my usual experience with Brownell's. On inspection the part looked to be well made and free of any imperfections. It fit my new Colt Commander as it were made for it. It only took a few minutes to swap the mainspring parts from the original MSH to this one, including chasing around the retaining pin on the floor. Function testing indicated no binding or rough spots internally. Except for fumbling the retaining pin, there were no complications installing this well made part.

This Commander was bought to replace a much older pistol to use for personal carry and to get back into competition. Flat housings don't it my hand well, so I usually replace them on the few 1911s I have. This is my first Ed Brown MSH and probably not my last.

Replaced ILS housing in Springfield (08/04/2017)

There were some comments about not fitting with the Springfield Armory 1911 at the bottom of the frame. Fit was perfect. Whatever was wrong has been resolved. The SA MSH was fine but I prefer arched. Would be nice if it was available in fine line checkering also, But the groves are substantial enough to provide good traction.

Ed Brown SS Arched mainspring housing (23/06/2018)

I recently purchased three of the SS arched Ed Brown housings for my SA 1911-A1 in 9mm and 45 ACP plus my older Ruger 1911 45 ACP. The housings fit perfectly on all three pistols and eliminated the sharp bottom on the frame that always dug into the palm of my hand. I used the Brownells spring kit and the whole assy. works beautifully in all three pistols. Straight forward installation procedure with minimal tools required. A solid bench vice makes it much easier to place the spring kit inside the mainspring housing. I highly recommend both the Ed Brown arched mainspring housing and the Brownells spring kit. Great products and at a good price. Especially when you get to use a discount code and free S/H. Thanks Brownells.

excellent fit (27/07/2010)

This is the only MSH I have found that is .539 wide. This MSH is machined v. cast and has excellent finsh. All others I have tried, (note my comments) have been far too small in each dimension to fit without a very large gap.

I use this for both Gov and Officer size MSHs. It takes a lot of work to shorten it down to an officers size, but still well worth the effort for a good fit.

Good quality & Fit (27/01/2011)

No casting marks or irregularities and nice finish. The fit in my Kimber was perfect. I did have to trim the grip safety tabs up top to accomodate the Swartz safety, but there was plenty of metal to work with and this would be true with ANY other MSH.

FWIW the arched MSH finally go me hitting the target where I wanted to. Had been high-left before.

Super product - minor fitting required (06/11/2011)

This is the second ED BROWN MSH I've installed to my personal 1911's (this installation to a Kimber Eclipse II, the first to a Kimber ProCarry II). the installation to the ProCarryII was a true drop in fit. No issues whatsoever with weapon fit and function. The installation to the Eclipse II required the most minor of fitment to insure the weapons Schwarz Safety functioned properly - nothing that 10 minutes of careful filing and polishing of the upper tangs on the MSH couldn't resolve. I shoot much better with the arched MSH, so it is a must on any 1911's that I'm carrying. Kimber weapons are beautiful and MOH accurate, and now it's SUPER top notch for me. HIGHLY RECOMMENDED PART.

Skip this one (17/01/2012)

It was over sized in every dimension, requiring way more fitting then should have been necessary. By the time I was finished, the finish was almost completely gone due to errors on my part. I still couldn't get it to do right afterward. I am tired of grinding on it, so I am just giving up.

Perfect FIt and feel (10/02/2012)

The housing in my Para was plastic. After removing the plungers, spring and pin from the old one, they installed in the new one perfectly. The complete assembly slid onto the gun with no binding. and feels great in the hand.

Perfect fit (05/10/2012)

The internal parts fit in the housing without drag or slop, the housing fit the frame of my S&W 1911 perfectly, no modification required. It took no more than 15 minutes from start to finish..

One of the best. (04/12/2013)

I bought this to install on a Colt series 80 to replace the flat polymer factory unit. Ed Brown obviously based his measurements from Colt factory specs. It slid right in, no wobble, no gaps and all the transition areas on the bottom edge of the frame line up perfectly. It has a nice machined finish and is not a casting.

Perfect for Kimber (17/07/2016)

Perfect drop in fit for Kimber custom II also tried in my Para GI E xpert the ridges on the side of the housing were a little tall but I feel it would have fi with a little filing. Looks and works great on my Kimber

Excellent mainspring housing! (23/10/2017)

I installed this Ed Brown arched mainspring housing in my Para GI Expert to replace the plastic mainspring housing that was in it from the factory. It needed just a small amount of fitting on top of the mainspring housing for the grip safety to work properly. This wasn't a problem as I knew going in there was a chance of it needing fitted, and it took all of 5 minutes to do.

All other aspects of this mainspring housing fit properly, and it works perfectly. The finish was nicely done, and there were no issues with this mainspring housing at all. This is the second Ed Brown mainspring housing I have used, and I'm glad I chose this manufacturer.

<img width="500" src='/userdocs/reviewimages/e5aa2687-b61f-4f32-9d14-27f919182b6c.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/6005fa39-527e-40cc-98ce-d310d540e07c.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/9b18c9cb-3d99-429f-a358-3b832ffba073.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/85e9c1e9-870f-401d-a5d4-aaedef5d8ac6.jpg' alt=''>

Great product (08/06/2011)

perfect drop in fit for a Kimber Custom Stainless II which had a broken OEM plastic piece

Fantasic Fir and Finish (02/09/2011)

This product dropped right in to my MK IV Gov't Model and really improved the look and feel of the pistol. The checkering is sharp and defined. A must have to replace your plastic housing.

Top Quality (10/04/2014)

This was bought to put on a Sig XO. It didnt require fitting. The quality is very high, the checkering is superbly executed. It doesnt come with a spring, plunger, or pin. Easy to tell its a quality piece when you have it in hand.

nice part (19/12/2010)

Installed this in my Colt 1991-A1 and it fit perfect. Nice quality work on the part. Sure beats the plastic factory piece.

Very nice checkering & fit! (23/10/2017)

I installed this Ed Brown mainspring housing in my Colt XSE Lightweight to replace the plastic mainspring housing that came in it from the factory. It took just a small amount of fitting on the top of it (five minutes at the most) for the grip safety to work properly.

All other aspects of this mainspring housing fit perfectly, and the finish is nice also. I was looking forward to how the 25 LPI checkering would feel, and it did not disappoint when it was installed. It gives a very good grip feel in hand.

This is the third Ed Brown mainspring housing I've used, and I would not hesitate to use them or recommend them. Very good product for the money!

<img width="500" src='/userdocs/reviewimages/61711061-c0dd-4483-b5b9-fb0bf544773b.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/27b8e687-8a51-4c33-a3b0-435c0889d869.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/30e4dbc7-09e1-49ae-9e80-31eb896a3ada.jpg' alt=''>

LOOKS AWSOME MIRROR POLISHED (16/02/2012)

part drops right in with minor fitting of old or new components and looks awsome polished to a mirror/chrome shine.

clean and simple works great (26/05/2012)

bought this to replace the original replacment part that was plastic. this one has much better finish and took just a bit of fitting because it is so tight. much better part than the dull to long one i pulled back out.

beautiful in my kimber (08/01/2012)

Replaced the plastic housing in Kimber Custom. I was concerned about the smooth finish and grip, no problem. Color, fit (slide right in), and function excellent.

Excellent Drop-In (27/03/2013)

This fit perfectly with no filing, no sanding, no loss of bluing, no drilling, and was installed in less than five minutes. I'd tried two other brands, both required substantial fitting,and one of those never did fit. Start with this one.

What can I say? It works! (17/06/2014)

I bought this mainspring housing for my 30's era 1911A1 and I love it! It required no fitting, feels better than the arched MSH, didn't interfere with reliability and it looks cool! As with a lot of mainspring housings, they do not come with the internal parts so I recommend the Brownells Mainspring Housing Rebuild Kit (080-000-549WB)!

Drop in part (17/12/2016)

I have a colt govt competition model in 9mm and it comes stock with a plastic mainspring housing that I did not like. I bought this one and took out all the mainspring housing parts from the old part and installed them in this new one. Installed this new part and it was a true drop in fit. No sanding or grinding needed. No gunsmith at all.

Perfect addition (15/03/2014)

Looks absolutely perfect on my Kimber Stainless II. Provides a little more grip than the cheap plastic MSH that came stock, and the finish is spot on. As with most 1911 parts, it did require minor fitting. Worth every penny and then some.

Bottom line... Great Product (24/01/2011)

This part took only minutes to install on my SA 1911. It looks great, fits great and feels great. It provides better grip than my stock arched MSH and gives my 1911 a great detailed look.

Great product from ed brown (06/04/2012)

Installed very easy on my norinco 1911. Looks and feels great.

nice look (22/09/2012)

Put on my Para GI Expert. It looks mean, but it does little to hold your hand in place. Checkering would be better. Requires fitting. I spent an hour with a file getting it right. Like I said, it looks great, but it does little else.

Rusts! (17/09/2013)

After about a year I started noticing some rust across the face of the scales. It got worse with time - as rust tends to do. My Springfield 1911-A1 is all steel and phosphate coated - this is the only part that is exhibiting any rust. My hands don't sweat particularly much. Aside from the rust it's quite well built and installed very easily.

Para expert (22/02/2014)

This is a sharp looking part but it will take some time and filework to fit it up with the para expert. it looks great on the gun.

Read 53 more ratings on brownells.com

49.9 79.9 9 GBP

Product no.: 087113100
ED BROWN BL/FL FITS GC - BLANK
Mfr Part: 816F 800732816005 Classic and contemporary looking mainspring housings combine form and function, so there is no compromise in grip control even though they look great. Flat shaped housings are available with popular 25 lpi checkering preferred by many shooters, as well the latest Snakeskin, Chainlink, and Chainlink II patterns that provide a secure gripping surf ace without the “sharpness” of machine cut checkering. Because they won’t abrade your hand or clothing, they make the perfect addition to competition, carry, and tactical guns. Some Chainlink models are also available with integral lanyard loop for attaching a weapon retention device. Traditional, Arched housing rides high in the heel of the hand to keep it close to the bore for minimal muzzle rise and excellent recoil control, and is available with a Grooved surface to provide a firm grip with little drag on clothing. Blank models are completely smooth to allow custom checkering or engraving, and are available in flat shapes. Also available for the Officer’s model in both blued and stainless steel with 25lpi checkering.

54.9 GBP 5 £54.90 *

Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse

Specs: Finish: Blued Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Ed Brown's 1911 mainspring housing combines aesthetics with functionality, offering various textures like 25 lpi checkering and unique patterns such as Snakeskin and Chainlink for improved grip without discomfort.
The product is available in both traditional, arched, and flat shapes with options for custom checkering or engraving, and some models include an integral lanyard loop.
Designed for easy drop-in installation, these mainspring housings are compatible with all full-size 1911 pistols, including Para-Ordnance models, and are offered in blued or stainless steel finishes.

Attributes

Finish: Blued Make: 1911 Model: Commander,Government Delivery weight: 0.054kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087000005
ED BROWN BL/FL FITS GC - SNAKESKIN
Mfr Part: 816S 800732816074 BL/FL fits GC - Snakeskin

69.9 GBP 4 £69.90 *

Delivery time approx. 7-14 days.
4 pcs. in the USA warehouse

Specs: Finish: Blued Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Description

BL/FL fits GC - Snakeskin

Attributes

Finish: Blued Make: 1911 Model: Commander,Government Delivery weight: 0.05kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087113101
ED BROWN SS/FL FITS GC - BLANK
Mfr Part: 817F 800732817002 Classic and contemporary looking mainspring housings combine form and function, so there is no compromise in grip control even though they look great. Flat shaped housings are available with popular 25 lpi checkering preferred by many shooters, as well the latest Snakeskin, Chainlink, and Chainlink II patterns that provide a secure gripping surf ace without the “sharpness” of machine cut checkering. Because they won’t abrade your hand or clothing, they make the perfect addition to competition, carry, and tactical guns. Some Chainlink models are also available with integral lanyard loop for attaching a weapon retention device. Traditional, Arched housing rides high in the heel of the hand to keep it close to the bore for minimal muzzle rise and excellent recoil control, and is available with a Grooved surface to provide a firm grip with little drag on clothing. Blank models are completely smooth to allow custom checkering or engraving, and are available in flat shapes. Also available for the Officer’s model in both blued and stainless steel with 25lpi checkering.

49.9 GBP 3 £49.90 *

Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse

Specs: Finish: Stainless Steel Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Ed Brown's 1911 mainspring housing is designed for both aesthetics and functionality, offering grip control without sacrificing comfort.
The product provides various textures, including 25 lpi checkering and Snakeskin patterns, and is available in both flat and traditional arched shapes.
Compatible with full-size 1911 pistols, the mainspring housing is offered in stainless steel and can be installed without modifications.

Attributes

Finish: Stainless Steel Make: 1911 Model: Commander,Government Delivery weight: 0.023kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087000027
ED BROWN BL/FL FITS GC - 25 LPI CHECKERING
Mfr Part: 816F25 800732816098 Classic and contemporary looking mainspring housings combine form and function, so there is no compromise in grip control even though they look great. Flat shaped housings are available with popular 25 lpi checkering preferred by many shooters, as well the latest Snakeskin, Chainlink, and Chainlink II patterns that provide a secure gripping surf ace without the “sharpness” of machine cut checkering. Because they won’t abrade your hand or clothing, they make the perfect addition to competition, carry, and tactical guns. Some Chainlink models are also available with integral lanyard loop for attaching a weapon retention device. Traditional, Arched housing rides high in the heel of the hand to keep it close to the bore for minimal muzzle rise and excellent recoil control, and is available with a Grooved surface to provide a firm grip with little drag on clothing. Blank models are completely smooth to allow custom checkering or engraving, and are available in flat shapes. Also available for the Officer’s model in both blued and stainless steel with 25lpi checkering.

74.9 GBP 17 £74.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Specs: Finish: Blued Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Ed Brown mainspring housings offer a blend of aesthetics and functionality with 25 lpi checkering for improved grip without excessive abrasion.
Available in various designs including Snakeskin and Chainlink patterns, with some models featuring an integral lanyard loop for weapon retention.
Compatible with all full-size 1911 pistols, including Para-Ordnance models, and offered in blued or stainless steel finishes for drop-in installation.

Attributes

Finish: Blued Make: 1911 Model: Commander,Government Delivery weight: 0.023kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087000028
ED BROWN SS/FL FITS GC - 25 LPI CHECKERING
Mfr Part: 817F25 800732817095 SS/FL fits GC - 25 LPI Checkering

79.9 GBP 8 £79.90 *

Delivery time approx. 7-14 days.
8 pcs. in the USA warehouse

Specs: Finish: Stainless Steel Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Description

SS/FL fits GC - 25 LPI Checkering

Attributes

Finish: Stainless Steel Make: 1911 Model: Commander,Government Delivery weight: 0.045kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087000025
ED BROWN BL/AR FITS GC - GROOVED
Mfr Part: 816ARCH 800732816111 BL/AR fits GC - Grooved

64.9 GBP 10 £64.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Specs: Finish: Blued Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Description

BL/AR fits GC - Grooved

Attributes

Finish: Blued Make: 1911 Model: Commander,Government Delivery weight: 0.045kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087000026
ED BROWN SS/AR FITS GC - GROOVED
Mfr Part: 817ARCH 800732817118 SS/AR fits GC - Grooved

64.9 GBP 10 £64.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Specs: Finish: Stainless Steel Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Description

SS/AR fits GC - Grooved

Attributes

Finish: Stainless Steel Make: 1911 Model: Commander,Government Delivery weight: 0.045kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087000041
ED BROWN BL/FL FITS GC - CHAINLINK
Mfr Part: 816C 800732816142 Classic and contemporary looking mainspring housings combine form and function, so there is no compromise in grip control even though they look great. Flat shaped housings are available with popular 25 lpi checkering preferred by many shooters, as well the latest Snakeskin, Chainlink, and Chainlink II patterns that provide a secure gripping surf ace without the “sharpness” of machine cut checkering. Because they won’t abrade your hand or clothing, they make the perfect addition to competition, carry, and tactical guns. Some Chainlink models are also available with integral lanyard loop for attaching a weapon retention device. Traditional, Arched housing rides high in the heel of the hand to keep it close to the bore for minimal muzzle rise and excellent recoil control, and is available with a Grooved surface to provide a firm grip with little drag on clothing. Blank models are completely smooth to allow custom checkering or engraving, and are available in flat shapes. Also available for the Officer’s model in both blued and stainless steel with 25lpi checkering.

69.9 GBP 5 £69.90 *

Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse

Specs: Finish: Blued Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

The 1911 mainspring housing features classic and contemporary designs with various textures like 25 lpi checkering, Snakeskin, and Chainlink patterns for improved grip without excessive sharpness.
Available in both flat and arched shapes, with options for a grooved surface or a smooth finish for custom work, and some models include an integral lanyard loop.
Designed for drop-in installation in all full-size 1911 pistols, including Para-Ordnance models like P-14 and P-16, and compatible with different finishes and materials including aluminum.

Attributes

Finish: Blued Make: 1911 Model: Commander,Government Delivery weight: 0.045kg

Item details

Made in USA
US export classification: 0A501.y.1

Product no.: 087000042
ED BROWN SS/FL FITS GC - CHAINLINK
Mfr Part: 817C 800732817149 Classic and contemporary looking mainspring housings combine form and function, so there is no compromise in grip control even though they look great. Flat shaped housings are available with popular 25 lpi checkering preferred by many shooters, as well the latest Snakeskin, Chainlink, and Chainlink II patterns that provide a secure gripping surf ace without the “sharpness” of machine cut checkering. Because they won’t abrade your hand or clothing, they make the perfect addition to competition, carry, and tactical guns. Some Chainlink models are also available with integral lanyard loop for attaching a weapon retention device. Traditional, Arched housing rides high in the heel of the hand to keep it close to the bore for minimal muzzle rise and excellent recoil control, and is available with a Grooved surface to provide a firm grip with little drag on clothing. Blank models are completely smooth to allow custom checkering or engraving, and are available in flat shapes. Also available for the Officer’s model in both blued and stainless steel with 25lpi checkering.

69.9 GBP 5 £69.90 *

Delivery time approx. 7-14 days.
5 pcs. in the USA warehouse

Specs: Finish: Stainless Steel Make: 1911 Model: Government, Commander

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

Ed Brown's 1911 mainspring housings offer a balance of aesthetics and functionality, with various textures like Chainlink that provide a secure grip without the harshness of traditional checkering.
These mainspring housings come in different styles, including flat and arched shapes, with options for 25 lpi checkering, and some models feature an integral lanyard loop.
Designed for easy drop-in installation, they are compatible with all full-size 1911 pistols and are available in either blued or stainless steel finishes to match any gun design.

Attributes

Finish: Stainless Steel Make: 1911 Model: Commander,Government Delivery weight: 0.045kg

Item details

Made in USA
US export classification: 0A501.y.1

Upgrade your 1911 with ED BROWN's Mainspring Housing 🏆- Flat/Blank fit for GC models. Perfect grip control & aesthetic appeal! ✨ Shop now for blued finish options. 🔫

Description
Ratings (53)

Traditional Shapes Plus Different Surfaces Let Every Shooter Get Their Favorite Grip Feel

More...

Customer ratings for ED BROWN BL/FL FITS GC - BLANK

Number of ratings: 53
From brownells.com: 53
Average rating: 4.5

Perfect fit & finish! No fitting needed! (11/10/2017)

Won't Fit Colt Defender (07/03/2016)

Ed Brown Officer's Main Spring Housing (06/03/2018)

Perfect fit in my Kimber Warrior (23/03/2013)

Perfectly machined (20/01/2011)

SS/FL fits GC - Chainlink (04/10/2011)

Fits Perfect No Wiggle (28/10/2011)

Excellent bright finish. Really brings my 1911 out. Very happy with my purchase.

Looks GREAT on Kimber Raptor Series (06/09/2012)

In stock as usual (11/05/2014)

Im finding myself checking your stock on items before checking gun makers(Kimber,ed brown,TROY,ect.) stock or availability.I usually have better luck with stock and service,
THANKS!!

excellent replacement msh (04/09/2010)

perfect fit (21/11/2010)

exc. piece of work,finish is fantastic

Perfect fit on a Springfield! (24/06/2011)

Love it! (27/08/2011)

Perfect. It fit my S.A. G.I. perfectly and got rid of the ILS system.

perfect fit (15/03/2012)

Nice look that make your 1911 special (17/12/2012)

great piece. (04/01/2013)

this MSH was a great addition to my norinco 1911A1. it fit much better than the stock one and gives my pistol the perfect grip for me. very easy to install with no fitting required.

perfect (19/05/2015)

Fit perfect (04/05/2012)

This is my third 817-ARCH stainless, they all fit perfectly, looks great and improves my grip, I have one on my custom built Caspian,Colt Combat Elite and this one is for my Colt Combat Commander

Read before buying (16/08/2013)

No Good (01/04/2014)

Springfield Milspec upgrade (09/10/2014)

Arched Pro. (05/11/2014)

Perfect fit on Kimber TLE Pro II! No modifications needed. Profile looks like it was made just for this pistol.

This cured a problem I had with this pistol shooting to low/right of center of mass.

Perfect Fit - Springfield Mil Spec (09/11/2014)

Perfect Fit - Springfield Loaded (23/10/2015)

Ed Brown Mainspring Housing (27/04/2016)

Replaced ILS housing in Springfield (08/04/2017)

Ed Brown SS Arched mainspring housing (23/06/2018)

excellent fit (27/07/2010)

Good quality & Fit (27/01/2011)

Super product - minor fitting required (06/11/2011)

Skip this one (17/01/2012)

Perfect FIt and feel (10/02/2012)

Perfect fit (05/10/2012)

The internal parts fit in the housing without drag or slop, the housing fit the frame of my S&W 1911 perfectly, no modification required. It took no more than 15 minutes from start to finish..

One of the best. (04/12/2013)

Perfect for Kimber (17/07/2016)

Excellent mainspring housing! (23/10/2017)

Great product (08/06/2011)

perfect drop in fit for a Kimber Custom Stainless II which had a broken OEM plastic piece

Fantasic Fir and Finish (02/09/2011)

This product dropped right in to my MK IV Gov't Model and really improved the look and feel of the pistol. The checkering is sharp and defined. A must have to replace your plastic housing.

Top Quality (10/04/2014)

nice part (19/12/2010)

Installed this in my Colt 1991-A1 and it fit perfect. Nice quality work on the part. Sure beats the plastic factory piece.

Very nice checkering & fit! (23/10/2017)

LOOKS AWSOME MIRROR POLISHED (16/02/2012)

part drops right in with minor fitting of old or new components and looks awsome polished to a mirror/chrome shine.

clean and simple works great (26/05/2012)

beautiful in my kimber (08/01/2012)

Replaced the plastic housing in Kimber Custom. I was concerned about the smooth finish and grip, no problem. Color, fit (slide right in), and function excellent.

Excellent Drop-In (27/03/2013)

What can I say? It works! (17/06/2014)

Drop in part (17/12/2016)

Perfect addition (15/03/2014)

Bottom line... Great Product (24/01/2011)

This part took only minutes to install on my SA 1911. It looks great, fits great and feels great. It provides better grip than my stock arched MSH and gives my 1911 a great detailed look.

Great product from ed brown (06/04/2012)

Installed very easy on my norinco 1911. Looks and feels great.

nice look (22/09/2012)

Rusts! (17/09/2013)

Para expert (22/02/2014)

This is a sharp looking part but it will take some time and filework to fit it up with the para expert. it looks great on the gun.

Read 53 more ratings on brownells.com

Customers also bought
Alternative items

WOLFF 20 LB. RECOIL SPRING
TYPE C EXTRA POWER SPRINGS FOR HARDBALL & HEAVIER LOADS

WOLFF

In stock

£12.90 *

Recoil Springs

WILSON COMBAT BLUE BULLET PROOF SLIDE STOP, .45 ACP
1911 BULLET PROOF™ SLIDE STOP

WILSON COMBAT

In stock

£84.90 * £84.90 - £89.90*

Slide Catches

3.6

WILSON COMBAT 1911 EXTENDED MAGAZINE RELEASE, BLUED
1911 EXTENDED MAGAZINE RELEASE

WILSON COMBAT

In stock

£59.90 *

Magazine Releases

BROWNELLS 1911 AUTO PIN KIT
1911 PIN KIT

BROWNELLS

In stock

£79.90 *

Frame Pins

NOSLER 45 CALIBER (0.451") 230GR JACKETED HOLLOW POINT 250/BOX
NOSLER SPORTING HANDGUN PISTOL BULLETS

NOSLER

In stock

£119.90 * £79.90 - £119.90*

Pistol Bullets

ED BROWN SS/FL FITS GC - BLANK
1911 MAINSPRING HOUSING

ED BROWN

In stock

£49.90 * £49.90 - £79.90*

Mainspring Housings

4.5

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: