Your basket is empty.

Basket

01788 815115

Newsletter

ALANGATOR LLC.
10/22® TRIMAG MAGAZINE COUPLER

705105457857 100005354

Description
Ratings (12)

Clamps Together Three Factory Magazines For Fast Reloads

Low-profile, molded polymer coupler clamps together three factory 10/22® magazines to put 30 rounds at your fingertips for super-fast reloads without fumbling for the next mag. More economical and less bulky than high-cap “banana” magazines, and easy to use. Slide the mags onto the TriMag and secure them by tightening the stainless steel crossbolt with a slot-head screwdriver or even a coin. Loosen the bolt to release the magazines for single use again. Get the Ruger® 10/22® Trimag Pouch.

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

More...

Customer ratings for ALANGATOR LLC. TRIMAG 10/22® MAG COUPLER

Number of ratings: 12
From brownells.com: 12
Average rating: 4.8

Great idea (15/06/2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09/09/2010)

Holds mags together positively. Goes together and comes apart with a flat-head screwdriver, which is needed to strip the 10/22 anyway. No glue or tape needed.

The only downside is the screw in the middle is aluminum, but then again, you aren't supposed to over-tighten it, so it's a non-issue.

TriMag Coupler in Competition (08/11/2010)

I used the TriMag at the 2010 Ruger Rimfire Championships. I normally shoot competition pistol, but I was talked into buying a 10/22 and shooting this match by a friend. As the match had a 10 round limit for magazines, the TriMag turned out to be the way to go for fast reloads. In addition to the fast reloads, the setup allows the system acts like a tripod. I was able to set the rifle on a barrel in an upright position for a fast start when the buzzer went off, no tripod needed. Cool stuff!

Dang it, now I'm hooked! I plan on getting several more as backups!

Flawless (02/02/2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18/03/2011)

Good stuff just wish they made a 2 magazine version.
the only bad thing I can say about them is that they interfer with the Buttlercreek foldingstock.
so it is not possible to have it folded while the magazine with the coupler are inserted to the gun.

but other then that superb!

Works GREAT. Condense your 10rnd Mags. (07/07/2011)

I purchased 1 of these to try, and once I had it at the range I decided to buy 6 more. I've been filling a box with my 10rnd Ruger Mags over the years and these are a GREAT way to condense those magazines into a usable product again. The 3 mags combined don't hang as low as a single 26rnd Ruger or Butler Creek Mag. I find these a valuable addition to any 10/22, 77/22 or 96/22 Shooter with a pile of old factory mags.

Outstanding Product (16/07/2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09/08/2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02/02/2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06/05/2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24/04/2014)

Just received this today. While I haven't shot my 10/22 utilizing it, there isn't much that can go wrong with it, and I really like the concept. This is a very secure platform for 3 mags and I have no doubts that it will perform as advertised. I don't have anything negative to say about this product, buy it!

Clever idea (22/09/2015)

This is the second TriMag I order. It holds the mags very securely plus makes it easier to manipulate in and out of the magazine well. Well thought out, well made product. It allows for 30 rounds without sticking out like the 25 round banana magazines. Makes a difference when shooting off short bipod.

BTW, it is the second because I bought more mags, first one is still holding out well.

Luisyamaha

Read 12 more ratings on brownells.com

18.9 18.9 1 GBP

Product no.: 100005354
ALANGATOR LLC. TRIMAG 10/22® MAG COUPLER
Mfr Part: NONE 705105457857 Low-profile, molded polymer coupler clamps together three factory 10/22® magazines to put 30 rounds at your fingertips for super-fast reloads without fumbling for the next mag. More economical and less bulky than high-cap “banana” magazines, and easy to use. Slide the mags onto the TriMag and secure them by tightening the stainless steel crossbolt with a slot-head screwdriver or even a coin. Loosen the bolt to release the magazines for single use again. Get the Ruger® 10/22® Trimag Pouch.

18.9 GBP 25 £18.90 *

Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

Specs: Color: Black Make: Ruger Model: 10/22

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

A low-profile, molded polymer coupler that clamps together three factory 10/22® magazines to put 30 rounds at your fingertips for super-fast reloads without fumbling for the next mag. It is more economical and less bulky than high-cap “banana” magazines, and easy to use.
The TriMag is made of polymer, matte black and is approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. It weighs 1 oz. (69g) and is secured by tightening the stainless steel crossbolt with a slot-head screwdriver or even a coin. Loosen the bolt to release the magazines for single use again.
The TriMag is a magazine coupler and holder that is compatible with the Ruger® 10/22® model. It is manufactured by ALANGATOR LLC. and is an efficient and convenient way to have quick access to multiple magazines during shooting sessions.

Attributes

Colour: Black Make: Ruger Model: 10/22 Delivery weight: 0.023kg

Item details

Made in USA
US export classification: 0A501.x

Description
Ratings (12)

Clamps Together Three Factory Magazines For Fast Reloads

SPECS: Polymer, matte black. Approximately 1¾" (4.5cm) long, 1½" (3.8cm) wide. 1 oz. (69g) wt.

More...

Customer ratings for ALANGATOR LLC. TRIMAG 10/22® MAG COUPLER

Number of ratings: 12
From brownells.com: 12
Average rating: 4.8

Great idea (15/06/2010)

Love these things. Unlike other coupler products, this one does not require any glue and holds the mags conveniently. A+

Good mag coupler (09/09/2010)

TriMag Coupler in Competition (08/11/2010)

Flawless (02/02/2011)

Theres almost nothing to complain about, the only thing is the colour of the screw.

Very good and an excellent idea but... (18/03/2011)

Works GREAT. Condense your 10rnd Mags. (07/07/2011)

Outstanding Product (16/07/2011)

This has got to be one of the best new products to hit the market in recent years. Outstanding guality, fair price and ease of use. I cannot say enough to praise this item. JUST BUY IT.

30 rounds and no banana mag! (09/08/2011)

I purchased to use with a bi-pod. I Recommend an extended mag release to aid with ease of re-charging rifle.

No High Capacity Troubles! (02/02/2012)

Works great and is especially good for those of you who live in states which restrict high capacity magazines. :)

Snug fit (06/05/2012)

Connects and holds together up to three standard 10-round Ruger hot-lips mags. Gives you 30 rouns capacity but doesn't protrude as far down as a std 30 round mag. Great for benchrest shooting

Good product (24/04/2014)

Clever idea (22/09/2015)

Read 12 more ratings on brownells.com

Customers also bought

RUGER® 10/22® MAGAZINE 22LR 10RD POLYMER CLEAR
RUGER® 10/22® MAGAZINE 22 LR

RUGER

In stock Delivery time approx. 2-3 days.
2 pcs. in the local warehouse

£40.00 * £37.80 - £40.00*

Magazines

VOLQUARTSEN BLUE 10/22® BOLT RELEASE
RUGER® 10/22® BOLT RELEASE

VOLQUARTSEN

In stock Delivery time approx. 7-14 days.
7 pcs. in the USA warehouse

£21.90 *

4.6

High Tower Armory 10/22® MAGAZINE COUPLER
10/22® MAGAZINE COUPLER

High Tower Armory

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£17.90 *

Magazine Couplers & Holders

VOLQUARTSEN SOCKET HEAD TAKEDOWN SCREW
10/22® SOCKET HEAD TAKEDOWN SCREW

VOLQUARTSEN

In stock Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

£13.90 *

Screws

3.8

TACTICAL SOLUTIONS, LLC COMPENSATOR 22 CALIBER 1/2-28 ALUMINUM SILVER
RUGER 10/22 COMPENSATOR 22 CALIBER

TACTICAL SOLUTIONS, LLC

Reordered Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

£69.90 *

Compensators & Muzzle Brakes

4.1

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: