My Account
(Sign in)

Your basket is empty.

Basket

01788 815115

Newsletter

BROWNELLS 10/22® RECEIVER DRILLING JIG

10/22® Receiver Drilling Jig

10/22 Receiver Drilling More...

Product no.: 080917000 050806104815 080917000

Description
Ratings (4)

Accurately Locates The Barrel Cleaning Hole On 10/22~ Receivers

Permits barrel cleaning from the rear without removing the barrel; eliminates accuracy-destroying cleaning rod wear caused by cleaning from the muzzle. Locates the correct spot at the rear of 10/22® receivers for drilling a small hole to allow the cleaning rod to pass through.

SPECS: Steel, blued. 4" (10.2cm) long.

More...

Customer ratings for 10/22® Receiver Drilling Jig

Number of ratings: 4
From brownells.com: 4
Average rating: 4.8

Good product.. (17/07/2010)

I purchased this item not long ago, and I think it's a fine tool. One of my customers requested that I bore a hole in the rear of the receiver so that he may clean his 10/22 barrel from the rear. It works fine, however, you must disassemble the receiver parts to use it. I feel that this would be a valuable item if used on a 10/22 with a match barrel installed, especially a threaded type. A factory barrel can be removed easily for cleaning and would be much eaiser than disassembly of the firearm.
I've only used this tool once, however, it's very handy to have when you might need it.

Saves time, ensures a perfect job! (08/02/2014)

No measuring, no error, takes only a few minutes to do a top notch job. Drilling a rear access hole allows cleaning from the breech end, all you have to do is drop the trigger group and pull the bolt. (three pins)

Another reviewer suggested removing the barrel to clean from the breech, not me thanks ... I don't want steel screws threading in and out of an aluminum receiver any more than is necessary, not to mention the return to zero issues you will have with your sights. Besides that would actually take more time, and you will always have easy access to your torque wrench to properly snug the barrel attachment screws right?

Don't forget the drill bit (01/09/2015)

This drill jig works. Got it last week and have used it twice. Don't forget to order a couple "F" (.257) drill bits along with the jig. Mine came with the guide bushing to tight for the F drill to enter let alone run freely. It hones out to size easily using 320 grit wet/dry paper wrapped on an 1/8" drill rod. Tape it in place or catch the paper in the Chuck. Also had to sand the screw threads on the cap screws that go thru the receiver. Didn't want to enlarge the pin holed by forcing them thru. I'd buy it again. It works better than the clearance drilled barrel stub and 5/16 extra long drill I was using.

So easy a caveman can do it! (11/01/2016)

Excellent jig that makes this simple modification quick and fool-proof. The "right tool" for the job and cleaning from the breech with a rod makes me much happier than dinking around with pull-throughs.

Read 4 more ratings on brownells.com

67.35 67.35 1 GBP

080917000
10/22® Receiver Drilling Jig 050806104815 10/22 Receiver Drilling Jig

67.35 GBP 16 £67.35 *

10+ In stock with Brownells USA. Delivery within 7-10 days

Specs: Make: Ruger Model: 10/22

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Description

10/22 Receiver Drilling Jig

Attributes

Make: Ruger Model: 10/22

Item details

Made in USA

Description
Ratings (4)

Accurately Locates The Barrel Cleaning Hole On 10/22~ Receivers

SPECS: Steel, blued. 4" (10.2cm) long.

More...

Customer ratings for 10/22® Receiver Drilling Jig

Number of ratings: 4
From brownells.com: 4
Average rating: 4.8

Good product.. (17/07/2010)

Saves time, ensures a perfect job! (08/02/2014)

Don't forget the drill bit (01/09/2015)

So easy a caveman can do it! (11/01/2016)

Read 4 more ratings on brownells.com

Customers also bought

Nylon Bore Brushes, 10 pak fits .22 Rimfire/.223/5.56mm
BORE BRUSHES

OTIS

Order will be placed Out of stock, backorder available

£20.40 * £17.50 - £23.20*

Bore Brushes

5 (4)

Fits .22 Centerfire Rifle, pak 3
DOUBLE-TUFF™ BORE BRUSH

BROWNELLS

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£5.85 * £4.60 - £40.10*

Bore Brushes

4.5 (10)

Model M1G-1 fits M1 Garand
MUZZLE GUARDS

DEWEY

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£13.00 * £11.70 - £14.25*

Muzzle Guards | Cleaning Rod Guides

4 (6)

Dewey 22C-24
COATED RODS

DEWEY

Order will be placed Out of stock, backorder available

£35.10 * £29.30 - £44.30*

Cleaning Rods

4.8 (29)

Jag, 6.5J .25 cal.-6.5mm
CLEANING ROD JAGS

DEWEY

In stock 10+ In stock with Brownells USA. Delivery within 7-10 days

£5.85 * £4.90 - £7.45*

Cleaning Rod Jags

0 (0)

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations:

Prices inclusive of duty & VAT.

Classical view

Mobile view