Extends Below The Receiver For Easy, Positive Operation Fits Both .22LR & .22 Mag
EDM, titanium part drops in easily to provide a big, easy-to-hit release for fast, convenient mag changes. Contoured for a comfortable fit. Light, high-tensile titanium ensures durability and performance. 10/22® is grooved for positive engagement.
SPECS: Titanium, gray, satin finish. 10/22 - Approximately ½" (12.7mm) wide, 1½" (3.8cm) tall. Fits .22 LR, .22 Mag, .22 Hornet. Does not fit Nylon Stock models.
More...
Customer ratings for POWER CUSTOM 10/22® MAG RELEASE
Number of ratings: 7
From brownells.com: 7
Average rating: 4.7
works the best(29/09/2010)
Pulled two screws and the push pin out , drop in the new mag release . WOW! it was way to easy to install and way too easy to use!! just a light push on the release and the mag drops out . not in the way.looks like a AR-15 type part.I installed on a Stainless 10-22..
works the best(01/10/2010)
Installed in a flash,,Remove 2 screws and a pin, bang done,Part looks like AR-15 stuff. Used on a stainless 10/22..
If you own a 10/22, this is a huge improvement over the factory mag release. I guarantee you won't be sorry.
Works as Advertised(21/02/2012)
Have installed 3 of these on different rifles. Changning this part out is simple - regardless of who manufactured part. Fit was perfect in each rifle. Have had no issues with any of them after several thousand rounds through each rifle.
color is off, but overall works good.(27/03/2012)
It does not match the silver powder coat color of the Ruger, even though this pic shows it is silver. It was really sticky at first but after working it a bit and cleaning some burs off my trigger group it works fine now. I do like the ribs though, they let you know your finger found the right spot!
May not fit in Takedown(07/01/2014)
I tried dropping this into my 10/22 Takedown (polymer trigger housing), but the fit was very tight and it seemed to bind on something, preventing installation, YMMV. Fitting probably would've made it work, but since the Takedown already has a decent extended mag release (albeit plastic), I just put it into my older 10/22 with metal trigger housing. Dropped into that one with no issues. As others have noted, the titanium color is a darker gray, and will not match the "stainless" parts exactly. I personally think it looks nice contrasted with the "blue" (black) parts.
Bomb Proof(17/09/2018)
Big improvement over the stock flush release. Very easy to install and use. Being made of titanium it should last forever. I like the look of raw titanium. Only a few small negatives, it does require regripping to reach it, some may find the edges sharp, and a black color options might be nice.
Product no.: 713000050 POWER CUSTOM 10/22® MAG RELEASE Mfr Part: NONE EDM, titanium part drops in easily to provide a big, easy-to-hit release for fast, convenient mag changes. Contoured for a comfortable fit. Light, high-tensile titanium ensures durability and performance. 10/22® is grooved for positive engagement.
Made in USA
US export classification: 0A501.x
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
🔥 Upgrade your Ruger 10/22 with a POWER CUSTOM Extended Titanium Mag Release! ✨ Easy installation, durable & ergonomic design for quick mag changes. Get yours now! 🛒
Extends Below The Receiver For Easy, Positive Operation Fits Both .22LR & .22 Mag
EDM, titanium part drops in easily to provide a big, easy-to-hit release for fast, convenient mag changes. Contoured for a comfortable fit. Light, high-tensile titanium ensures durability and performance. 10/22® is grooved for positive engagement.
SPECS: Titanium, gray, satin finish. 10/22 - Approximately ½" (12.7mm) wide, 1½" (3.8cm) tall. Fits .22 LR, .22 Mag, .22 Hornet. Does not fit Nylon Stock models.
More...
Customer ratings for POWER CUSTOM 10/22® MAG RELEASE
Number of ratings: 7
From brownells.com: 7
Average rating: 4.7
works the best(29/09/2010)
Pulled two screws and the push pin out , drop in the new mag release . WOW! it was way to easy to install and way too easy to use!! just a light push on the release and the mag drops out . not in the way.looks like a AR-15 type part.I installed on a Stainless 10-22..
works the best(01/10/2010)
Installed in a flash,,Remove 2 screws and a pin, bang done,Part looks like AR-15 stuff. Used on a stainless 10/22..
If you own a 10/22, this is a huge improvement over the factory mag release. I guarantee you won't be sorry.
Works as Advertised(21/02/2012)
Have installed 3 of these on different rifles. Changning this part out is simple - regardless of who manufactured part. Fit was perfect in each rifle. Have had no issues with any of them after several thousand rounds through each rifle.
color is off, but overall works good.(27/03/2012)
It does not match the silver powder coat color of the Ruger, even though this pic shows it is silver. It was really sticky at first but after working it a bit and cleaning some burs off my trigger group it works fine now. I do like the ribs though, they let you know your finger found the right spot!
May not fit in Takedown(07/01/2014)
I tried dropping this into my 10/22 Takedown (polymer trigger housing), but the fit was very tight and it seemed to bind on something, preventing installation, YMMV. Fitting probably would've made it work, but since the Takedown already has a decent extended mag release (albeit plastic), I just put it into my older 10/22 with metal trigger housing. Dropped into that one with no issues. As others have noted, the titanium color is a darker gray, and will not match the "stainless" parts exactly. I personally think it looks nice contrasted with the "blue" (black) parts.
Bomb Proof(17/09/2018)
Big improvement over the stock flush release. Very easy to install and use. Being made of titanium it should last forever. I like the look of raw titanium. Only a few small negatives, it does require regripping to reach it, some may find the edges sharp, and a black color options might be nice.