Wilson Dies

In stock

£84.90 * £69.90 - £84.90*

L.E. WILSON 270 WINCHESTER BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

The Wilson chamber type bullet seater ensures precise alignment of the bullet and cartridge case for benchrest shooters.
It features a design where the case and bullet are fully captured before the bullet is seated, enhancing accuracy.
This die is more accurate than conventional 7/8 inch to 14 bullet seating dies, making it one of the most precise seaters available.

4.4

In stock

£84.90 * £69.90 - £84.90*

L.E. WILSON 6MM DASHER BUSHING NECK DIE
STAINLESS NECK SIZING DIES

4.4

In stock

£89.90 * £79.90 - £94.90*

L.E. WILSON 6.5MM PRC BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

The L.E. Wilson, Inc. 6mm Dasher Bushing Neck Die allows users to control the amount of neck sizing on cartridge cases with interchangeable bushings.
This neck sizing die eliminates the need for a conventional expander, leading to better concentricity and longer brass life.
The neck die sizes up to 3/16" from the mouth end and requires a separate neck die base and an Arbor Press for operation.

Reordered

£84.90 * £69.90 - £84.90*

L.E. WILSON 338 EDGE BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

The Wilson chamber type bullet seater ensures precise alignment of both bullet and cartridge case for benchrest shooters.
Its design allows the bullet to be pushed straight into the case by a close-fitting seating stem, increasing accuracy over conventional dies.
This bullet seater is considered one of the most accurate, specifically made for 6.5 PRC cartridges.

4.4

In stock

£84.90 * £69.90 - £84.90*

L.E. WILSON 270 WINCHESTER MICROMETER TOP BULLET SEATER DIE
MICROMETER TOP BULLET SEATER DIES

The Wilson chamber type bullet seater ensures precise alignment of bullet and cartridge case.
It features a design where both case and bullet are fully captured before seating, enhancing accuracy.
This bullet seater is more accurate than conventional 7/8 inch to 14 bullet seating dies.

4.4

In stock

£139.90 * £129.90 - £139.90*

L.E. WILSON 6.5 GRENDEL MICROMETER TOP BULLET SEATER DIE
MICROMETER TOP BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Die provides precise bullet-seating depths with a micrometer top that measures in 0.001” increments.
Constructed from durable stainless steel, this seater die is designed for long-term use and consistent performance.
It is compatible with an Arbor Press, allowing reloaders to adjust seating depths at the range, potentially reducing the number of trips needed for testing.

In stock

£139.90 * £129.90 - £139.90*

L.E. WILSON 204 RUGER BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Die offers precise bullet-seating with 0.001” increment adjustments.
Constructed from durable stainless steel, it is designed to be used with an Arbor Press for reloading.
Its portability allows reloaders to adjust bullet seating depth at the range, reducing the need for multiple trips.

Reordered

£79.90 * £69.90 - £84.90*

L.E. WILSON 338 WINCHESTER MAGNUM BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

4.4

In stock

£84.90 * £69.90 - £84.90*

L.E. WILSON 28 NOSLER MICROMETER TOP BULLET SEATER DIE
MICROMETER TOP BULLET SEATER DIES

4.4

In stock

£139.90 * £129.90 - £139.90*

L.E. WILSON 7MM REM MAGNUM MICROMETER TOP BULLET SEATER DIE
MICROMETER TOP BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Die allows for precise bullet-seating depths using a scale in 0.001” increments.
Constructed from durable stainless steel, it's designed to offer reliability and longevity for reloaders.
It is intended to be used with an Arbor Press and enables reloaders to adjust seating depth at the range, saving multiple trips.

In stock

£134.90 * £129.90 - £139.90*

L.E. WILSON 300 REM ULTRA MAG MICROMETER TOP BULLET SEATER DIE
MICROMETER TOP BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Die provides precise bullet-seating depths with a micrometer scale in 0.001” increments.
Constructed from durable stainless steel, it ensures reliability and longevity for reloaders.
Designed for use with an Arbor Press, the die allows for on-the-range adjustments, saving multiple trips to the range.

Reordered

£139.90 * £129.90 - £139.90*

L.E. WILSON 224 VALKYRIE BULLET SEATING DIE
CHAMBER TYPE BULLET SEATER DIES

The L.E. Wilson Micrometer Top Bullet Seater Die ensures precise bullet-seating depths with a micrometer scale in 0.001” increments.
Constructed from durable stainless steel, this die is designed for longevity and accuracy in reloading.
Designed for use with an Arbor Press, the seater die allows for adjustments at the range, enabling reloaders to test and adjust seating depth on-site.

In stock

£84.90 * £69.90 - £84.90*

L.E. WILSON 6.5MM VLD SEATING STEM
WILSON VLD BULLET SEATER STEMS

The Wilson chamber type bullet seater ensures precise alignment of both bullet and cartridge case for benchrest shooters.
It utilizes a close-fitting seating stem to push the bullet straight into the case, offering more accuracy than conventional dies.
Designed specifically for the .224 Valkyrie cartridge, this die is among the most accurate bullet seaters available.

4.4

In stock

£29.90 *

L.E. WILSON 30 CALIBER VLD SEATING STEM
WILSON VLD BULLET SEATER STEMS

The L.E. Wilson VLD Seating Stem is tailored for VLD-style bullets, ensuring better seating by gripping the bullet lower on its profile.
It is compatible with various bullet designs including VLD Secant, Hybrid, and Tangent, and serves as a direct replacement for standard seating stems in L.E. Wilson Chamber Type Bullet Seater Dies.
The seating stem is designed with steeper stems to match the steeper profile of VLD bullets, providing reloaders with enhanced versatility for their ammunition.

Reordered

£29.90 *

L.E. WILSON 22 CALIBER VLD SEATING STEM
WILSON VLD BULLET SEATER STEMS

The L.E. Wilson VLD Seating Stem is tailored for VLD-style bullets, providing better seating by gripping the bullet lower on its profile.
It is a direct replacement for standard seating stems in L.E. Wilson Chamber Type Bullet Seater Dies, enhancing versatility for reloaders.
The stem is designed with steeper angles to match the unique profile of VLD bullets, catering to Secant, Hybrid, and Tangent designs.

Reordered

£29.90 *

L.E. WILSON 308 WINCHESTER BUSHING FULL LENGTH SIZING DIE
BUSHING FULL LENGTH DIES

The L.E. Wilson VLD Seating Stem is tailored for VLD-style bullets, enhancing the seating process by gripping lower on the bullet profile.
It is compatible with various VLD bullets including Secant, Hybrid, and Tangent, and serves as a direct replacement for standard seating stems in L.E. Wilson Chamber Type Bullet Seater Dies.
The seating stem is designed with steeper stems to match the VLD bullet profile, offering reloaders increased versatility in their reloading applications.

In stock

£124.90 * £109.90 - £124.90*

L.E. WILSON 7MM VLD SEATING STEM
WILSON VLD BULLET SEATER STEMS

The die sizes the case neck to desired tension and the case body simultaneously, with an adjustable depth decapping rod and an extra Decapping Punch included.
Constructed from high-quality heat-treated steel, the die is designed to leave 3/16” of the case neck unsized for potentially increased accuracy.
Compatible with standard 7/8ths reloading presses, it features interchangeable bushings and durable stainless parts for longevity, but does not come with a neck bushing.

Reordered

£29.90 *

L.E. WILSON 6.5MM CREEDMOOR BUSHING NECK DIE
STAINLESS NECK SIZING DIES

The L.E. Wilson VLD Seating Stem is designed for better seating of VLD-style bullets, accommodating Secant, Hybrid, and Tangent types.
It is a direct replacement for the standard seating stem in L.E. Wilson Chamber Type Bullet Seater Dies.
Steeper stems are machined to fit the unique profile of VLD bullets, providing reloaders with enhanced versatility.

In stock

£89.90 * £79.90 - £94.90*

L.E. WILSON 6MM SEATER DIE BLANK
WILSON SEATER BLANK

The L.E. Wilson, Inc. 6.5mm Creedmoor Bushing Neck Die allows for adjustable neck sizing with the use of interchangeable bushings.
It improves concentricity and extends brass life by eliminating the need for a conventional expander.
Note: The Neck Die Base is sold separately, and bushings are not included with the die.

In stock

£59.90 * £59.90 - £184.90*