243 Brass

L.E. WILSON 6MM DASHER BUSHING NECK SIZING DIE
STAINLESS NECK SIZING DIES

The L.E. Wilson, Inc. 300 Winchester Magnum Bushing Neck Die allows for adjustable neck sizing using interchangeable bushings and is used with an Arbor Press.
The neck die sizes the case neck to 3/16" from the mouth end without using a conventional expander, which improves concentricity and extends brass life.
Bushings are not included with the die, and the necessary Neck Die Base is sold separately.

In stock

£84.90 £84.90 - £89.90

L.E. WILSON

The L.E. Wilson, Inc. 6mm Dasher Bushing Neck Die allows users to control the amount of neck sizing on cartridge cases with interchangeable bushings.
This neck sizing die eliminates the need for a conventional expander, leading to better concentricity and longer brass life.
The neck die sizes up to 3/16" from the mouth end and requires a separate neck die base and an Arbor Press for operation.

In stock

£89.90 £84.90 - £89.90

LEE PRECISION 303 BRITISH LOADER
LOADERS, RIFLE

The LEE PRECISION 303 British Loader is a simple tool for beginners to try reloading, with neck sizing suitable for brass fired from your own gun.
It is capable of reloading a round in 30 seconds and includes all necessary components except for a hammer, which is required but not provided.
The kit comes with a plastic storage case and features a bullet seater, priming chamber, decapping chamber, neck sizing die, primer rod, powder measure, load data, and complete instructions.

In stock

£49.90

Unlock precision with the ULTIMATE RIFLE 4-DIE SET for 30-30 Winchester! 🎯 Achieve factory-like accuracy and reload with ease.

LEE PRECISION 30-30 WINCHESTER ULTIMATE 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

The set includes a full length-resizing die, Collet Neck sizing die, Easy Adjust Dead Length Bullet seating die, and Factory Crimp die for maximum reloading versatility.
No case lube is needed, and the design ensures longevity of brass and consistent seating depth for optimal accuracy.
Comes complete with shell holder, powder measure, and Lee load data for a comprehensive reloading solution tailored for the 30-30 Winchester cartridge.

In stock

£74.90 £64.90 - £79.90

LEE PRECISION 30-06 SPRINGFIELD ULTIMATE 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

The set includes a full length-resizing die, Collet Neck sizing die, Easy Adjust Dead Length Bullet seating die, and Factory Crimp die for maximum versatility and precision in reloading.
No case lube is needed and the design ensures that cases last almost indefinitely while providing factory-like accuracy and dependability in the finished cartridges.
Comes complete with shell holder, powder measure, and comprehensive Lee load data for various powder brands, all organized in an easy-to-read format.

FORSTER PRODUCTS, INC. INSIDE NECK REAMER .452 BULLET DIAMETER (.454-.4545)
NECK REAMER

In stock

£74.90 £64.90 - £79.90

Achieve precision with the Forster Inside Neck Reamer for .452 bullets. 🛠️ Perfect for removing excess brass for flawless reloading!

FORSTER PRODUCTS, INC.

Case Neck Reamers

The NECK REAMER is designed to remove excess brass from inside case neck walls and is made from high-grade, wear-resistant tool steel.
It features a staggered tooth design for smooth, chatter-free cutting and should be used after firing with a full load but before neck or full-length sizing.
It is suitable for .45 caliber cases, specifically for bullet diameters .452" (.454-.4545), and neck thickness can be tested by sliding a bullet into a fired, unsized case neck.

In stock

£37.90 £37.90 - £39.90

REDDING TRIM DIE 221 REM
TRIM DIES

ACT COLEMAN 6.5MM CREEDMOOR CALIBER DIE
TRIM-IT II CASE TRIMMER

Redding Trim Dies enable case trimming without the need for full length resizing, unlike other manufacturers' dies.
They are ideal for case forming and necking down brass from a different caliber as an intermediate step before resizing.
Specifically designed for the 221 Remington Fireball cartridge, these dies fall under the Body Dies style category.

In stock

£59.90 £54.90 - £114.90

Upgrade your reloading with the TRIM-IT II Case Trimmer! ✂️ Enjoy precision trimming for 6.5 Creedmoor and more with ease!

ACT COLEMAN

Case Trimmers

The TRIM-IT II can be mounted to any standard drill or drill press for easier and faster case trimming.
It features an adjustable 3-way cutter with a carbide blade for trimming, chamfering, and de-burring various calibers of brass.
Includes a built-in micrometer for precise cut-length control, with quick adjustability and interchangeable dies for different calibers, sold separately.

In stock

£27.90

Discover the "SPECIAL LINE"™ Dewey-Thread Bore Brush for 6mm-25cal rifles! 🛠️ Enjoy easy cleaning with durable phosphor bronze bristles.

BROWNELLS

BROWNELLS 6MM-25CAL SPECIAL LINE DEWEY RIMFIRE RIFLE BRUSH 12/PACK
SPECIAL LINE"! DEWEY-THREAD RIMFIRE RIFLE BORE BRUSHES

Bore Brushes

Special Line brushes directly fit Dewey Coated rods without needing a thread adapter.
Constructed with high-quality phosphor bronze wire bristles for effective cleaning and durability.
Features a one-piece brass shank design to prevent barrel scratching during cleaning.

4.8

Reordered

£49.90 £19.90 - £54.90

REDDING NECK SIZING DIE 7MM REM MAG
NECK SIZING DIES

Redding Neck Sizing Dies are designed to size only the necks of bottleneck cases, which helps to extend the lifespan of the brass and enhance shooting accuracy.
These dies are not suitable for resizing the shoulder or body of cases; hence, cases should not be interchanged between rifles.
Made from high-quality alloy steels and machined to tight tolerances, the dies are heat treated, hand polished, and ultrasonically cleaned for durability and flawless performance.

In stock

£64.90 £54.90 - £144.90

REDDING TRIM DIE 7MM REM ULTRA MAG
TRIM DIES

Redding Trim Dies allow for case trimming without the need for full length resizing.
They are ideal for case forming and necking down brass from other calibers.
Specifically designed for the 7mm Remington Ultra Magnum cartridge.

In stock

£54.90 £54.90 - £114.90

REDDING NECK SIZING DIE 30 REM AR
NECK SIZING DIES

The Redding Neck Sizing Dies only size the necks of bottleneck cases to extend brass life and enhance accuracy.
These dies are not suitable for interchanging fired cases between rifles as they do not size the shoulder or body.
Made from high-quality alloy steels and machined to tight tolerances, they are heat treated and hand polished for durability and flawless function.

In stock

£79.90 £54.90 - £144.90

LEE PRECISION 30-06 SPRINGFIELD LOADER
LOADERS, RIFLE

L.E. WILSON 6.5X55MM SWEDE BUSHING NECK SIZING DIE
STAINLESS NECK SIZING DIES

The LEE PRECISION 30-06 Springfield Loader is an ideal tool for beginners in reloading, offering a simple way to start with all necessary components except a hammer.
This loader only neck sizes the brass, which should be previously fired through your own gun, ensuring a custom fit for reliable shooting.
The kit includes essential tools like a bullet seater, priming chamber, decapping chamber, and more, plus a plastic storage case for organization and protection of the components.

In stock

£49.90

L.E. WILSON

The die allows users to adjust the neck sizing of 6.5 x 55 mm Swedish Mauser cartridge cases using interchangeable bushings.
Eliminates the need for a conventional expander, leading to better concentricity and extended brass life.
Neck sizing die works with an Arbor Press and sizes the neck up to 3/16" from the mouth end; bushings and neck die base are sold separately.

Reordered

£89.90 £84.90 - £89.90

LEE PRECISION 30-30 WINCHESTER LOADER
LOADERS, RIFLE

The LEE PRECISION 30-30 Winchester Loader is a user-friendly tool ideal for beginners in reloading, able to neck size brass and reload rounds quickly.
This kit comes with all necessary components to start loading one caliber, except for a hammer, and includes a plastic storage case for organization.
It features a bullet seater, priming chamber, decapping chamber, neck sizing die, primer rod, powder measure, and provides load data with complete instructions.

In stock

£49.90

LEE PRECISION 7MM REM MAG ULTIMATE 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

The set includes a full length-resizing die, Collet Neck sizing die, Easy Adjust Dead Length Bullet seating die, and Factory Crimp die for versatile brass reloading.
No case lube is needed, and the design ensures long-lasting brass and perfect seating depth for bullets every time.
Comes complete with shell holder, powder measure, and Lee load data for a comprehensive reloading solution tailored for 7 mm Remington Magnum cartridges.

In stock

£74.90 £64.90 - £79.90

LEE PRECISION 300 WIN MAG ULTIMATE 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

The set includes a full length-resizing die for returning brass to factory dimensions and a Collet Neck sizing die for accuracy with fire formed brass.
An Easy Adjust Dead Length Bullet seating die ensures perfect seating depth and the Factory Crimp die provides a secure crimp on bullets.
Comes complete with shell holder, powder measure, and Lee load data for a variety of powder brands, making it a comprehensive reloading kit for 300 Winchester Magnum.

In stock

£74.90 £64.90 - £79.90

LEE PRECISION 22-250 REMINGTON ULTIMATE 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

The set includes a full length-resizing die, a collet neck sizing die, an Easy Adjust Dead Length Bullet seating die, and a Factory Crimp die for maximum versatility and precision.
No case lube is needed, and the set is designed to extend the lifespan of brass cases while ensuring the best possible accuracy for fire formed brass.
Comes complete with shell holder, powder measure, and Lee load data to provide factory-like accuracy and dependability for the 22-250 Remington cartridge.

In stock

£74.90 £64.90 - £79.90

REDDING NECK SIZING DIE 30 TC
NECK SIZING DIES

The Redding Neck Sizing Dies only size the necks of bottleneck cases, which extends brass life and enhances accuracy.
These dies are not suitable for resizing fired cases for interchange between rifles, as they do not resize the shoulder or body.
Made from high-quality alloy steels and precision-machined, these dies are heat treated and hand polished for durability and flawless operation.

In stock

£54.90 £54.90 - £144.90

REDDING NECK SIZING DIE 370 SAKO MAG
NECK SIZING DIES