Lee Press

Reordered

£21.90 * £19.90 - £49.90*

LEE PRECISION SHOTGUN SLUG 1OZ. 12GA
SHOTGUN SLUG MOULDS

The Lee Factory Crimp Die firmly crimps bullets, enhancing accuracy by ensuring a consistent pressure curve and reduced velocity variation.
It is effective even on bullets without a crimp groove, improving their shooting accuracy.
Designed for 45-70 Government cartridges and fits all 7/8"-14 reloading presses, but does not include a shellholder.

LEE PRECISION 308 WINCHESTER FACTORY CRIMP DIE
RIFLE FACTORY CRIMP DIES

In stock

£59.90 * £54.90 - £59.90*

Shotgun Moulds

The Lee DRIVE KEY slug can be loaded with standard equipment and conventional crimp, eliminating the need for specialized support wads.
Slug performance with the exclusive drive key feature enhances rotation in rifled barrels, matching or surpassing the velocity and accuracy of factory-loaded slugs.
The moulds come equipped with self-centering automatic core pins, sprue plate, handles, and include complete instructions with suggested loads for ease of use.

In stock

£21.90 * £19.90 - £49.90*

LEE PRECISION 44-40 WCF FACTORY CRIMP DIE
RIFLE FACTORY CRIMP DIES

Lee Factory Crimp Die provides a firm crimp that increases accuracy by ensuring a consistent pressure curve and less velocity variation.
The die works with bullets even without a crimp groove, and fits all 7/8"-14 reloading presses, but does not include a shellholder.
Specifically designed for the .308 Winchester cartridge, the crimp die features a collet for squeezing the case mouth into the crimping groove.

In stock

£21.90 * £19.90 - £49.90*

LEE PRECISION 308 WINCHESTER ULTIMATE 4-DIE SET
ULTIMATE RIFLE 4-DIE SETS

The Lee Factory Crimp Die firmly crimps bullets, enhancing their accuracy even without a crimp groove.
It creates a higher initial pressure for a more consistent pressure curve and reduced velocity variation.
The die fits all 7/8"-14 reloading presses but does not include a shellholder.

LEE PRECISION 0.457" DIAMETER CLASSIC BULLET SIZING KIT
CLASSIC BULLET SIZING KIT

In stock

£74.90 * £64.90 - £74.90*

Rifle Dies

The set includes a full length-resizing die, Collet Neck sizing die, Easy Adjust Dead Length Bullet seating die, and Factory Crimp die for versatile and accurate reloading.
No case lube is needed, and the design ensures that cases last almost forever while providing factory-like accuracy and dependability.
Comes complete with shell holder, powder measure, and Lee's load data for a comprehensive reloading solution.

4.2

In stock

£29.90 * £29.90 - £31.90*

LEE PRECISION LEE RAM PRIME
RAM PRIME PRIMING UNIT

Lee Precision's 0.457" diameter Bullet Sizing Kit is designed for easy and fast sizing of cast bullets and fits any single stage reloading press with standard 7-8x14" threads.
The kit automatically seats and crimps gas checks and does not require special nose punches or top punches for molds, as bullets are pushed through the die nose first.
It is recommended to use a sizing kit that is 0.001" larger than the groove diameter for cast bullets, and the kit includes a container to capture sized bullets.

LEE PRECISION 223 REMINGTON FACTORY CRIMP DIE
RIFLE FACTORY CRIMP DIES

In stock

£24.90 *

Priming Tool Accessories

Reordered

£19.90 * £19.90 - £49.90*

LEE PRECISION LEE BENCH PLATE
BENCH PLATE KIT

Lee Factory Crimp Die firmly crimps bullets, enhancing accuracy by ensuring higher start pressure and uniform pressure curve.
Compatible with all 7/8"-14 reloading presses and specifically designed for the 223 Remington cartridge.
Features a collet for crimping without a crimp groove; however, shellholder is not included with the die.

LEE PRECISION SHOTGUN SLUG 7/8OZ. 12GA.
SHOTGUN SLUG MOULDS

Reordered

£54.90 *

Benches

Lee Bench Plate enables quick press removal without the need to unbolt it from the bench.
Includes a steel base block compatible with all current Lee metallic presses and special elevator bolt hardware.
Features a powder-coated, thick steel design that mounts securely to any bench or tabletop, enhancing bench top rigidity.

LEE PRECISION 0.357" DIAMETER CLASSIC BULLET SIZING KIT
CLASSIC BULLET SIZING KIT

In stock

£54.90 * £54.90 - £59.90*

Shotgun Moulds

Lee Precision Shotgun Slug Moulds allow for reloading slugs at a lower cost than standard trap loads, using a standard trap hull, wad, and crimp with any shot shell reloading press.
The exclusive drive key design of the mould not only ensures slug rotation in rifled barrels for accuracy but also eliminates the need for support wads or base fillers.
These moulds are equipped with self-centering automatic core pins for efficiency and come with a sprue plate, handles, and instructions, including suggested load data.

Reordered

£29.90 * £29.90 - £31.90*

LEE PRECISION LEE STEEL BASE BLOCK
BENCH PLATE STEEL BASE BLANK

Lee Precision's .357" diameter bullet sizing kit allows for easy and fast sizing of cast bullets, fitting any single stage reloading press with standard 7-8x14" threads.
The kit automatically seats and crimps gas checks and does not require special nose punches or top punches for molds.
When using the kit, it's recommended to select a sizing diameter .001" larger than the bullet's groove diameter for optimal results.

LEE PRECISION 0.309" DIAMETER CLASSIC BULLET SIZING KIT
CLASSIC BULLET SIZING KIT

Reordered

£24.90 *

Benches

The Lee Steel Bench Block is compatible with the Lee Bench Plate system and the Lee Reloading Stand.
It is made of thick steel with a black powder-coated finish and has integral tabs for secure placement.
The block includes mounting holes for all current Lee Presses and comes with hardware for mounting one press.

Reordered

£31.90 * £29.90 - £31.90*

LEE PRECISION LEE AUTO DISK RISER
AUTO-DISK POWDER MEASURE RISER

Lee Precision's Bullet Sizing Kit sizes cast bullets quickly and easily, fitting any single stage press with standard 7-8x14" threads.
No special nose punches are needed as bullets are pushed nose first, and the kit automatically seats and crimps gas checks.
Designed for single stage presses, the kit includes a special container for sized bullets and eliminates the need for top punches.

Powder Measures & Dispensers

In stock

£14.90 *

Sale

🎉 Celebrate reloading precision with the LEE 50th Anniversary Kit! Includes Breech Lock Press, tools & more. Get started on your ammo crafting journey! 🎯

LEE PRECISION LEE 50TH ANNIVERSARY CHALLENGER KIT
50TH ANNIVERSARY KIT

LEE PRECISION 270 WINCHESTER FACTORY CRIMP DIE
RIFLE FACTORY CRIMP DIES

In stock

£224.90 *

Old price £238.20

Reloading Kits

The kit includes a new Breech Lock Challenger Press with one quick-change bushing for fast die swapping.
It comes with a variety of tools such as the Perfect Powder Measure, Lee Safety Scale, and primer pocket-cleaning tool for comprehensive reloading.
Designed with an "O" frame, the press allows the use of standard 7/8"-14 threaded dies, enhancing its versatility.

In stock

£21.90 * £19.90 - £49.90*

LEE PRECISION 0.311" DIAMETER CLASSIC BULLET SIZING KIT
CLASSIC BULLET SIZING KIT

Lee Precision's 270 Winchester Factory Crimp Die firmly crimps bullets, enhancing shooting accuracy by ensuring consistent pressure and velocity.
The crimp die works with bullets lacking a crimp groove due to its collet design that secures the case mouth into the crimping groove.
Compatible with all 7/8"-14 reloading presses, the die does not include a shellholder and is part of the main Rifle Dies category.

In stock

£29.90 * £29.90 - £31.90*

LEE PRECISION 30-30 WINCHESTER FACTORY CRIMP DIE
RIFLE FACTORY CRIMP DIES

Lee Precision's 0.311" diameter Bullet Sizing Kit is designed for easy and fast sizing of cast bullets and fits any single stage reloading press with standard 7-8x14" threads.
The kit automatically seats and crimps gas checks and does not require special nose punches or top punches for molds.
To use, bullets should be lubricated, then the gas check is placed on the base and the bullet is sized through the die, crimping the gas check in the process.

In stock

£21.90 * £19.90 - £49.90*

LEE PRECISION 0.452" DIAMETER CLASSIC BULLET SIZING KIT
CLASSIC BULLET SIZING KIT

The Lee Factory Crimp Die firmly crimps bullets, enhancing shooting accuracy even for bullets without a crimp groove.
It creates a higher starting pressure for a more consistent pressure curve and reduced velocity variation.
Designed for 30-30 Winchester cartridges, the die fits all 7/8"-14 reloading presses but does not include a shellholder.

Reordered

£31.90 * £29.90 - £31.90*

LEE PRECISION 0.356" DIAMETER CLASSIC BULLET SIZING KIT
CLASSIC BULLET SIZING KIT

Lee Precision's 0.452" diameter Bullet Sizing Kit is designed for easy and fast sizing of cast bullets and fits any single stage reloading press with standard 7/8x14" threads.
The kit includes a special container for sized bullets, and gas checks are seated and crimped automatically without the need for a top punch.
Intended for single stage presses, the kit requires the bullets to be lubricated with liquid alox before sizing to ensure proper crimping of gas checks.

Reordered

£29.90 * £29.90 - £31.90*