Your basket is empty.

Basket

01788 815115

Newsletter

EJECTOR SPRING SET

840000051

Description
Ratings (2)

Stable Performance For 500,000 Compression Cycles

Replacement, drop-in fit chrome silicon extractor and ejector springs from David Tubb provide long term durability and up to 80% more power than factory springs in AR-15 rifles. Precision manufacturing and high quality steel give extremely consistent compression cycle for smooth operation over thousands of rounds.

SPECS: Chrome silicon steel.

More...

Customer ratings for SUPERIOR SHOOTING CS EXTRACTOR/EJECTOR SPRING SET

Number of ratings: 2
From brownells.com: 2
Average rating: 5

Great Springs (10/03/2014)

Design: Simple design, no inserts are needed. Worked perfect out of the box. I don't recall there being installation instructions in the small zip baggie these arrived in. If you cannot find this information on the Interwebs though, you probably shouldn't be messing around with firearms.

Construction: The CS coating on these springs is far more reliable and durable than the plain steel used in standard springs; CS gives these springs a higher tolerance to heat, and many more cycles before deformation of the spring occurs. Also, there are no bits of rubber or O-rings to get damaged, lost, or installed incorrectly. No: "do I need green or black?" questions with this set.

Function: These springs are top notch quality and function great. Over thousands of rounds I have had no F2F or extraction issues. High quality ammunition and proper maintenance aids in this as well.

Cost: On Brownells, a standard set of extractor/ejector springs (plain steel) will run you about $2.25 all the way to around $8 for brand name springs with inserts and O-Rings. For a few bucks over that, you get a system that is simplified, reliable, consistent, and wellâ¦ superior. It was a no-brainer for me.

Installation: I'm including this section for information purposes only; I can't add or remove stars based on this because the install is governed by the design of the AR-15, not of this product. Installing these springs can be done without any special tools or experience. I found it to be one of the more difficult AR-15 construction procedures however, simply because the disassembly/reassembly of the bolt requires some physical strength and the ability to carefully align very small holes while holding them with your three hands. If you have trouble installing these or do not have three hands, a tool is available â it is certainly not required however, as I did my install with two hands, a hand clamp and socket from a socket wrench â YouTube it. If I were doing more of these installs I would purchase the tool for convenience alone (Sinclair AR-15 Bolt Vise: 749-003-708WS.)

Just a better spring (29/11/2014)

I don't have much more to say from the review by "Mark of La Mancha" but I will add this. When installing these springs and closely compare them to any factory springs like them (I've compared them to Bravo Company, Bushmaster, JP, and Rock River Arms) and you'll notice the differences that set these apart. The cut at the ends of the CS wire versus a angle grinding job on military spec springs, the coating, and so on.

I've installed ten sets of these and while somewhat tricky to do with only two hands they are well worth it and a vast improvement on reliability and knowing that you will have excellent lifetime out of the springs without degradation of their strength.

Read 2 more ratings on brownells.com

27.9 27.9 1 GBP

Product no.: 840000051
SUPERIOR SHOOTING CS EXTRACTOR/EJECTOR SPRING SET
Mfr Part: CSSAR15 Replacement, drop-in fit chrome silicon extractor and ejector springs from David Tubb provide long term durability and up to 80% more power than factory springs in AR-15 rifles. Precision manufacturing and high quality steel give extremely consistent compression cycle for smooth operation over thousands of rounds.

27.9 GBP 0 £27.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Make: AR-15

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

David Tubb's chrome silicon extractor and ejector springs offer up to 80% more power than factory springs for AR-15 rifles.
The springs are a drop-in fit for easy replacement and provide long-term durability.
Manufactured with precision, they ensure consistent compression for smooth operation through thousands of rounds.

Attributes

Make: AR-15 Delivery weight: 0.005kg

Item details

Made in USA

Upgrade your AR-15 with SUPERIOR SHOOTING's Chrome Silicon Extractor/Ejector Spring Set 🎯 Precision-made for durability & power. Shop now for smoother operation!

Description
Ratings (2)

Stable Performance For 500,000 Compression Cycles

SPECS: Chrome silicon steel.

More...

Customer ratings for SUPERIOR SHOOTING CS EXTRACTOR/EJECTOR SPRING SET

Number of ratings: 2
From brownells.com: 2
Average rating: 5

Great Springs (10/03/2014)

Just a better spring (29/11/2014)

Read 2 more ratings on brownells.com

Customers also bought

WHITWORTH TOOL AR-15 M4 BARREL EXTENSION STEEL UNFINISHED
AR-15 M4 BARREL EXTENSION

WHITWORTH TOOL

In stock

£34.90 *

Barrel Extension Parts

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: