Your basket is empty.

Basket

01788 815115

Newsletter

DOUBLE STAR
AR-15 LOWER PARTS KIT

841348103417 100010669

Description
Ratings (14)

The Double Star AR-15 Lower Receiver Parts Kit includes everything needed to complete a stripped AR-15 lower receiver. The Kit includes: Fire control group Fire control group pins and springs Bolt catch assembly Magazine catch assembly Front pivot pin Rear takedown pin Takedown springs (2) Takedown detents (2) Trigger guard pin Pistol grip, screw and washer Buffer detent Buffer detent spring

SPECS: Fits small pin AR-15 lower receivers.

More...

Customer ratings for DOUBLE STAR AR-15 LOWER PARTS KIT SMALL PIN

Number of ratings: 14
From brownells.com: 14
Average rating: 4.2

UNEXPECTED EXCELLENCE (11/08/2012)

I have built several AR-15s this year. The only reason I ordered the Doublestart AR-15 Lower Parts Kit was that DPMS was on back order and boy was I pleasently surprised. These are exceptional quality and a great great trigger right out of the box so to speak. I will use these again. I just ordered two more to squirrel back. I never endorse products but was just so impressed I wanted others to get in on it.

High Quality LPK at a Great Price! (26/08/2012)

Everything you need at a great price. I build several AR/M4 units a year for LEO customers and this kit is tops. I have used other LPK's (which are also good) but the Double Star is top shelf. I used to use DPMS but after a couple of bum kits I tried DS and never looked back.

The stock trigger is actually pretty good - it is crisp with little creep. I would say the LPK is a a couple of notches above DPMS's LPK in overall fit and finish.

The Double Star LPK assembles easily and I have yet to hear of any failure beyond normal. The units I build get more annual use in professional training than most units see in a decade of casual/recreational range/field use.

I like the Double Star so much I always have a couple on hand in case I need to build a unit on extremely short notice (read - same day) which has happened.

Thank you again Brownells for carrying great products at great prices.

Quality Parts (27/08/2012)

I got this parts kit and everything was great! Tolerances were tight, almost too tight. It took a hammer and alot of force to get the selector into the hole. Other than that, everything is great. I would rate this better than the DPMS part kits I have used.

Excellent, Surprizing (28/08/2012)

I have now built 8 ARs and used 3 different brands of lower receiver parts kits and let me tell you, after using this Double Star this will be the ONLY LPK I use ( unless it is a two stage or something like that ). This is the absolutely best I have used between DPMS, Rock River and one from another Co., I was so pleasently surprized with the quality of parts and the smooth, smooth action after installing the LPK.. you can't go wrong with this kit.

Nice quality parts kit with one oddity (19/09/2012)

This is my first AR build and was reccomended by a local shop to try this new parts kit from DoubleStar that he had seen on Brownells. Promptly ordered, shipping was fast and parts kit included an extra detent and detent spring for the takedown pins. The trigger is smooth with very little to no play and everything fit perfectly except for the rear takedown pin. It was slightly large diameter such that it would not go into the hole at all AND it was not machined with the detent groove. Seemed kind of odd so I took it to a gunsmith who checked measurements of my Stag lower reciever (perfectly within specs) and the pin and indeed the pin was a few thousandths oversized not to mention the missing detent groove. I needless to say had to purchase a separate rear takedown pin to complete my build. I suppose it could have been a mistake on Double Star to place the wrong part in the bag, but overall, I'm quite pleased with the kit.

amazing lower parts kit (22/09/2012)

Most of the parts went together almost too easily but the take-down pins are a bit tight in my lower.

The trigger is amazing, total travel is about 3mm and there is very little if not zero over-travel. There is some creep but with the little distance the trigger moves it is not very noticeable at all. For a combat rifle the trigger would be perfect, for a bench rifle I think it would be pretty good... depending on how ridiculously picky you are.

Overall it is very good now I need to see if it will withstand the test of time.

Great Bang for Buck (22/09/2012)

I ordered the Doublestar LPK to go into my Stag Arms stripped lower, and the fit and finish of the parts is excellent, and went in with ease. Everything runs nice and tight, and the trigger has just a little bit of creep, which I like. I was also motivated to support local business by buying Doublestar.

Overall I would definitely recommend this kit for anything needing a good solid parts kit for a great price.

Certainly not a Geiselle Trigger Group, but I would easily recommend this kit. Doublestar even included an extra pin detent, because we all know how putting those things in can go.

Great Lower Kit (09/11/2012)

The Kit was easy to install and the trigger is a pleasant surprise. My friend who has a timney trigger even raised his eye brows on the trigger pull. His trigger was still crisper but for a stock trigger this one is the way to go. My only complaint with the kit was it was missing the hammer/trigger pin. There are suppose to be two and only one was in the package. I didn't want to wait in the mail for one so I just picked on up at a local gunsmith. But I still feel this kit deserves all 5 stars.

A breeze to install and nice trigger! (17/11/2012)

I was a bit anxious going into my first ever lower build. But thankfully this LPK installed into my Spikes lower like they were meant to go together. The parts are nice and oiled in the baggie which I am sure aided in installation.

Also want to say that I really like the trigger. It is nice and crisp and has a very short take up. But we'll see how it really does when I get the upper together and some rounds down range.

Improvements Needed (20/12/2012)

Kit is fine but for a few problems. The first is that the roll pins that are included are not "roll" pins but "rolled" pins. This type of pin is an inferior product that tends to easily have its center punched through, thus ruining the pin. The second issue I had, was that the included "rear takedown pin" was an unfinished product that did not have the final machining or refinishing performed on it. This is probably a fluke, but it forced me to go out and procure a replacement that should have been unecessary. This is a decent Low Cost kit, but DoubleStar can do better than this.

Missing parts (22/08/2013)

This kit, although good quality, was missing the trigger guard roll pin and the bolt catch roll pin. It came with an extra takedown pin detent and spring. Doublestar needs to work on their quality control as I have read several reviews of this kit and many people have reported missing pieces. Make sure to take inventory when you receive this parts kit.

Out of Spec (14/01/2014)

This parts kit is not worth it. The trigger guard is is loose and has finish defects, the sides of the hammer and trigger needed to be grinded down in order to fit into my Aero Precision lower without binding. The selector is oversized to the point where it fit without alteration, but is VERY tight, tough to move while installed, and will probably cause unnecesary wear while breaking in. I purchased this kit because the DPMS was on backorder and I was impatient. If you know what you are doing, this kit can work, but mine was not drop in. Very low quality parts kit.

A must have if building an AR (17/04/2014)

I installed this on a Stag lower and can not be happier. The parts are well built. I did not use the trigger guard, I used the Magpul trigger guard. The safety feels a lot better then the DPMS. It's a smoother transition from safe to fire. I have put this lower parts kit on several lowers I have built.

Great Trigger (28/08/2015)

To start, I've got to say I was happy they packed an extra detent and spring for the pivot pin, this being my first build and my having inevitably launched them across the shop (I did find them later, so I've got extras now).

That being said, I thought the safety was a little scratchy but that should go away with a little use.

I bought this because almost everyone that reviewed this set was impressed by the trigger. I'm no AR expert, but I've done a lot of rifle shooting, mostly bolt action, so I'm spoiled. I've gotta say I couldn't believe it the first time I tried it. I used the trigger scale 10 times, and nothing was higher than 3lb 9oz and nothing lower than 3lb 7oz. Just a little creep prior to the break, but it broke nice and clean. That is light (and crisp) for this type of rifle and the repeatability was great.

Don't know if I'll ever do another build, but if I do, I'll buy this again.

Read 14 more ratings on brownells.com

104.9 104.9 1 GBP

Product no.: 100010669
DOUBLE STAR AR-15 LOWER PARTS KIT SMALL PIN
Mfr Part: AR270 841348103417 The Double Star AR-15 Lower Receiver Parts Kit includes everything needed to complete a stripped AR-15 lower receiver. The Kit includes: Fire control group Fire control group pins and springs Bolt catch assembly Magazine catch assembly Front pivot pin Rear takedown pin Takedown springs (2) Takedown detents (2) Trigger guard pin Pistol grip, screw and washer Buffer detent Buffer detent spring

104.9 GBP 6 £104.90 *

Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse

Specs: Make: AR-15 Type: Lower Receiver

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

The Double Star AR-15 Lower Parts Kit includes all necessary components to complete a stripped AR-15 lower receiver.
It is designed to fit small pin AR-15 lower receivers and is manufactured by DOUBLE STAR.
The kit contains various parts such as the fire control group, pins and springs, bolt catch assembly, and a pistol grip with its hardware.

Attributes

Make: AR-15 Type: Lower Receiver Delivery weight: 0.204kg

Item details

Made in USA
US export classification: 0A501.c

🔧 Complete your AR-15 build with the Double Star Lower Parts Kit! Fits small pin receivers, includes all essentials. Shop now & finish your project! 🛠️

Description
Ratings (14)

SPECS: Fits small pin AR-15 lower receivers.

More...

Customer ratings for DOUBLE STAR AR-15 LOWER PARTS KIT SMALL PIN

Number of ratings: 14
From brownells.com: 14
Average rating: 4.2

UNEXPECTED EXCELLENCE (11/08/2012)

High Quality LPK at a Great Price! (26/08/2012)

Quality Parts (27/08/2012)

Excellent, Surprizing (28/08/2012)

Nice quality parts kit with one oddity (19/09/2012)

amazing lower parts kit (22/09/2012)

Great Bang for Buck (22/09/2012)

Great Lower Kit (09/11/2012)

A breeze to install and nice trigger! (17/11/2012)

Improvements Needed (20/12/2012)

Missing parts (22/08/2013)

Out of Spec (14/01/2014)

A must have if building an AR (17/04/2014)

Great Trigger (28/08/2015)

Read 14 more ratings on brownells.com

Customers also bought
Alternative items

MAGPUL MOE TRIGGERGUARD, BLACK
AR-15/M16 MOE™ TRIGGERGUARD

MAGPUL

Not available

Trigger Guards

4.8

BROWNELLS AR-15 MOE STOCK ASSY COLLAPSIBLE MIL-SPEC ODG
AR-15 MOE STOCK ASSY COLLAPSIBLE MIL-SPEC

BROWNELLS

In stock

£119.90 * £119.90 - £124.90*

Buttstocks

LUTH-AR AR-15 LOWER PARTS KIT
AR-15 LOWER PARTS KIT

LUTH-AR

In stock

£129.90 *

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations:

Prices inclusive of duty & VAT.

Classical view

Mobile view