Your basket is empty.

Basket

01788 815115

Newsletter

HAHN PRECISION
AR-15/M16 9MM DEDICATED CONVERSION BLOCK

100002321

Description
Ratings (9)

Hahn Design Gives Reliable Function

Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral leg hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount. Two-piece, aluminum body features extra tight, mating surfaces to minimize the collection of carbon and brass buildup; scalloped hold-actuator allows unburned powder and other debris to pass through for uninterrupted cycling. Hold actuator is wire EDM-machined from high grade, 01 tool steel and functions with the standard 5.56mm bolt hold-open, which is strong, reliable and more readily available than the 9mm version. (Last round hold-open feature functions with Colt magazines only.) Ejector is of standard, Colt configuration for easy replacement by any department armorer. Funneled magazine well ensures smooth entry for rapid mag changes and limits rotational movement caused by variances in magazine taper. Spring-loaded roller maintains constant tension against the lower receiver well to prevent free play. Steel, feed ramp is heat-treated for extra strength and superior wear-resistance; provides consistent round delivery with most bullet types. Armorer installation recommended.

SPECS: Body 6061-T6 billet aluminum, Mil-Spec black anodized finish. Components Steel, parkerized finish. Fits all Mil-Spec AR-15/M16 receivers. Armorer installation recommended.

More...

Customer ratings for HAHN PRECISION DEDICATED 9MM CONVERSION BLOCK

Number of ratings: 9
From brownells.com: 9
Average rating: 4.9

Awesome product! (16/11/2009)

Just got my Hahn Dedicated 9mm conversion block. It is worth every penny. It doesnt get any better. This thing is awesome. Perfect fit in my lower. Made extremely well. I have had other conversion blocks and this one is by far the best. Bolt hold open works perectly. I am very impressed. Thank you Brownells.

Excellent Product (21/04/2010)

We used this block with the RRA upper assem. and it feeds,ejects and locks the bolt open every time with both metalform and c products mags. After more than a 1000 rounds that is something for a 9mm AR.

For the Serious 9mm AR-15 Shooter (04/06/2011)

Had not been impressed with performance of bottom loading and plastic blocks used by some of my shooting friends and was somewhat leary of them. This dedicated top loading conversion block is a semi permanent installation in your lower and not a quick change. The block can be removed but not as quickly as the bottom loaded units. Required very minor filing of the inside of my lower's mag well and removal and re-installation of the bolt catch. But, this is what makes this block as reliable as a dedicated 9mm lower receiver and it cannot fall out of the receiver! Functions flawlessly with the Metalform 20 round magazines and holds the bolt open after every last shot. Buy this one first and save money, you won't be disappointed. I am one happy 9mm Carbine shooter.

Worth it (27/08/2012)

Bought for a 9mm build on a generic CMC produced 5.56 lower, using a CMMG dedicated upper and CMMG buffer and Metalform Mags. Skeptical at purchase--but fit exceptionally well, and flawless in operation/function. The installation is benign--all you have to do is partially remove the bolt catch pin; temporarily remove the bolt catch long enough to slide the Hahn insert into the mag well from the top--then reverse the process. I think I spent 3 minutes on the whole deal. Bottom line: the quality and craftsmanship is recognized best when viewing and inspecting the device after installation. Precisely machined and finished. (Hence the brand name) And, Mag well has great machined tapers for mag fit. If you did not CLOSELY inspect, you might think this was a dedicated 9mm lower.
I like mine--zero malfunctions and over 600 rds.

Very happy purchase (11/02/2015)

Decided to build a 9mm AR, but initially balked at the cost of this unit and installed the ProMag unit instead. The Promag unit would not reliably load any type of ammunition I tried. Brownells accepted it back and I exchanged for this unit. I wish I would have started with it! The machining is perfect and it reliably loaded both 124 Grain and 147 Grain FMJ with no problems. Admittedly, have only fired 100 rounds through it using Brownells 32 rnd magazines, but had no failures. If you do not want to go with a dedicated receiver, this unit is worth the cost. There really is no comparison. I tried inexpensive and it was cheap for a reason.

May require adjustment (09/03/2015)

Well made part. However, I had extracting issues which was easily fixed by just slightly bending the ejector closer to the bolt to ensure it was contacting the case head every time, firearm functions flawless ever since. FYI, I tried pro mags which were junk (figures), but the metal form mags they sell here are great!

Hahn conversion block is the best! (29/09/2015)

I installed this in a Spikes lower for a 9mm build. Easy to install. Worked perfect from the first round. Feed everything I stuff in the mags. 147 FMJ-TC, HP's, Even the Bayou 147 FP!

Very much worth the price difference!

Great Product! (17/10/2016)

This is the ultimate 9mm conversion block. Simple installation and flawless performance at the range! Three 32 round mags without a hiccup. Worth the extra bucks!!

Worked perfectly (14/11/2016)

This conversion block worked perfectly. This was my first 9mm AR that I built. Was a little worried about not getting a dedicated lower/upper kit so I did not want to skimp on a cheaper conversion block.

The quality of the block is very high. Feels tough and fit perfectly into the AR lower with no wiggle room. I did have to install it prior to installing the mag release button but that's not any different than any other build I've done.

The Brownell's Colt style magazines fit perfectly again very precise and no wiggle or sloppiness at all. The bolt held back every time the mag was empty. I put around 200 rounds through the combo with zero defects at all. No misfeeds, misfire, or anything. I am very pleased with this item and I know that it'll perform well for anyone.

Read 9 more ratings on brownells.com

284.9 284.9 1 GBP

Product no.: 100002321
HAHN PRECISION DEDICATED 9MM CONVERSION BLOCK
Mfr Part: A9CSRD0405 Designed, manufactured, and field-tested specifically for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines. Integral leg hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situations where reliability is paramount. Two-piece, aluminum body features extra tight, mating surfaces to minimize the collection of carbon and brass buildup; scalloped hold-actuator allows unburned powder and other debris to pass through for uninterrupted cycling. Hold actuator is wire EDM-machined from high grade, 01 tool steel and functions with the standard 5.56mm bolt hold-open, which is strong, reliable and more readily available than the 9mm version. (Last round hold-open feature functions with Colt magazines only.) Ejector is of standard, Colt configuration for easy replacement by any department armorer. Funneled magazine well ensures smooth entry for rapid mag changes and limits rotational movement caused by variances in magazine taper. Spring-loaded roller maintains constant tension against the lower receiver well to prevent free play. Steel, feed ramp is heat-treated for extra strength and superior wear-resistance; provides consistent round delivery with most bullet types. Armorer installation recommended.

284.9 GBP 6 £284.90 *

Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse

Specs: Make: AR-15

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

The Hahn Precision Conversion Block is specifically designed for law enforcement, facilitating the use of 9mm ammo in AR-15/M16 rifles with Colt and modified Uzi-type magazines.
It features a two-piece aluminum body with tight mating surfaces to reduce debris buildup, a wire EDM-machined hold actuator from 01 tool steel, and a heat-treated steel feed ramp for durability and reliability.
The conversion block incorporates a spring-loaded roller to eliminate free play and a funneled magazine well for quick mag changes, while the last round hold-open feature works exclusively with Colt magazines.

Attributes

Make: AR-15 Delivery weight: 0.136kg

Item details

Made in USA
US export classification: 0A501.x

🔫 Transform your AR-15/M16 with the Hahn Precision 9MM Conversion Block! Engineered for law enforcement, ensures reliability with Colt mags. Learn more! 🚓🛠️

Description
Ratings (9)

Hahn Design Gives Reliable Function

SPECS: Body 6061-T6 billet aluminum, Mil-Spec black anodized finish. Components Steel, parkerized finish. Fits all Mil-Spec AR-15/M16 receivers. Armorer installation recommended.

More...

Customer ratings for HAHN PRECISION DEDICATED 9MM CONVERSION BLOCK

Number of ratings: 9
From brownells.com: 9
Average rating: 4.9

Awesome product! (16/11/2009)

Excellent Product (21/04/2010)

For the Serious 9mm AR-15 Shooter (04/06/2011)

Worth it (27/08/2012)

Very happy purchase (11/02/2015)

May require adjustment (09/03/2015)

Hahn conversion block is the best! (29/09/2015)

Great Product! (17/10/2016)

This is the ultimate 9mm conversion block. Simple installation and flawless performance at the range! Three 32 round mags without a hiccup. Worth the extra bucks!!

Worked perfectly (14/11/2016)

Read 9 more ratings on brownells.com

Customers also bought
Alternative items

TTI INTL BOLT CATCH PIN
GAS TUBE PIN

TTI INTL

Reordered

£8.90 * £7.90 - £8.90*

Ejector Pins | Trigger Guard Pins

TTI INTL TAKEDOWN PIN SPRING
AR-15/M16 TAKEDOWN PIN DETENT SPRING 5 PACK

TTI INTL

Reordered

£8.90 *

Springs

BROWNELLS BARREL SEAL 12 GAUGE 10 PACK
REMINGTON 1100/11-87 GAS O-RINGS

BROWNELLS

In stock

£21.90 * £13.90 - £54.90*

O-Rings

CARLSONS MAGAZINE EXTENSION 12 GA 8 SHOT REMINGTON 870/1100/11-87
REMINGTON 870/1100/11-87 SHOTGUN MAGAZINE EXTENSION TUBES

CARLSONS

In stock

£89.90 * £89.90 - £94.90*

Magazine Tube Extensions

BROWNELLS AR-15 AR-15 MAGAZINE RELEASE ASSEMBLY
AR-15 AR-15 MAGAZINE RELEASE ASSEMBLY

BROWNELLS

Reordered

£14.90 *

Magazine Releases

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: