Your basket is empty.

Basket

01788 815115

Newsletter

United Kingdom

Shop
Schematics
Manufacturers
Sale

# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Home Manufacturers Forward Controls Design LLC

Forward Controls Design LLC

Forward Controls Design LLC Rifle Parts
Forward Controls Design LLC > Rifle Parts - Preview 0

Forward Controls Design LLC > Rifle Parts - Preview 1

Forward Controls Design LLC Handgun Parts
Forward Controls Design LLC > Handgun Parts - Preview 0

Forward Controls Design LLC > Handgun Parts - Preview 1

Forward Controls Design LLC Magazines
Forward Controls Design LLC > Magazines - Preview 0

Forward Controls Design LLC > Magazines - Preview 1

Forward Controls Design LLC Shooting Accessories
Forward Controls Design LLC > Shooting Accessories - Preview 0

Forward Controls Design LLC > Shooting Accessories - Preview 1

Forward Controls Design LLC Gunsmith Tools
Forward Controls Design LLC > Gunsmith Tools - Preview 0

Forward Controls Design LLC > Gunsmith Tools - Preview 1

Forward Controls Design LLC Optics & Mounting
Forward Controls Design LLC > Optics & Mounting - Preview 0

Forward Controls Design LLC > Optics & Mounting - Preview 1

Forward Controls Design LLC Gun Cleaning & Chemicals
Forward Controls Design LLC > Gun Cleaning & Chemicals - Preview 0

Forward Controls Design LLC > Gun Cleaning & Chemicals - Preview 1

Restrict search

Products
Bestseller
Top rated
Sale
New

Filter by: then

Sort by:

Display per page:

Page: 1 2 3 4 < >

Forward Controls Design LLC Products

1 - 15 of 52 results

Page: 1 2 3 4 < >

FORWARD CONTROLS DESIGN LLC SLING ADAPTER END PLATE, BLACK
AR-15 END PLATE W/ 3-QD SLING SWIVEL SOCKETS STEEL

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 2-3 days.
1 pcs. in the local warehouse
2 pcs. in the USA warehouse

£84.90 * £84.90 - £89.90*

Buffer Tube Hardware | Tactical Sling Mounts

The AR-15 End Plate with 3-QD Sling Swivel Sockets is a product by FORWARD CONTROLS DESIGN LLC that has been designed to accommodate the rear facing socket and fill one of the design requirements that ESF must be able to use stakable castle nuts and allow the carbine stock to fully collapse.
The End Plate Sling Adapter for ARs has side and rear facing sockets and is available in Billet 4140 DLC Black or FDE Cerakote finishes. However, it is important to note that end plates that incorporate side facing QD swivel sockets can mask available wrench notches required for torquing.
ESF's receiver extension indexing tab can be tight on some receiver extensions. The design cues of the product do not affect its structural integrity, and mostly go unnoticed by users, they merely reflect a paradox, that it can be quite complicated to create a simplified design.

FORWARD CONTROLS DESIGN LLC SOTAR CAM PIN, NP3 COATED
CAM PIN BY SOTAR

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
8 pcs. in the USA warehouse

£28.90 * £23.90 - £28.90*

SCP (SOTAR Cam Pin) is a collaboration between Chad Albrecht of School of American Rifle and Forward Controls Design, featuring a machined dimple on one side of the carrier cam pin for consistent orientation during reinstallation.
Consistently reinstalling the cam pin in the same orientation reduces wear and stress on the bolt, maintaining a tight fit of the cam pin and reducing wear on the cam pin itself as well as on the cam pin bore on the bolt.
SCP is based on the TDP spec cam pin, dimpled on one side, and NP3 or nitride coated, made in the USA, and incompatible with KAC SR15 BCG.

FORWARD CONTROLS DESIGN LLC AR-15 ENHANCED MAGAZINE RELEASE SERRATED AMBIDEXTROUS
AR-15 ENHANCED MAGAZINE RELEASE AMBIDEXTROUS

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
6 pcs. in the USA warehouse

£94.90 *

Magazine Releases

The AR-15 Enhanced Magazine Release Ambidextrous by Forward Controls Design LLC is a serrated or dimpled magazine release for .223 and .308 AR receivers, which has a lower profile and is left smooth.
The ambidextrous magazine release has an intuitive contoured lever and includes a 10.9lb extra spring rate mag catch spring. It is made from CNC machined 4140 steel and black nitride coated, with a lever of 7075 aluminum and Type 3 hard coat anodized.
The EMR-A's lever pivots on the receiver and needs to be removed before installing or removing the trigger. It is installed and removed in the same manner as a factory mag catch and is incompatible with Geissele's Maritime Bolt Catch and CMC's anti walk pins, among others.

FORWARD CONTROLS DESIGN LLC COMPACT SECTIONAL RODS FOR AR15/M16, 18-20 CONFIGURATION
COMPACT SECTIONAL ROD

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£139.90 * £114.90 - £139.90*

Cleaning Rods

CSR (Compact Sectional Rods) by Forward Controls Design is a kit consisting of short, precision machined stainless steel rods for dislodging stuck cases in the chamber of an AR15/M16.
The kit includes a brass jag and stainless steel plug/ram, and can also be used as a cleaning rod. It is designed to be compact and easily carried in a pack or stored in a Vltor or SOPMOD stock storage compartment.
Available in three configurations, CSR is incompatible with USGI cleaning rod attachments but can be used with an adapter. It can also be ordered with a custom pouch or stored in a pistol magazine pouch.

FORWARD CONTROLS DESIGN LLC AR-15 HANDGUARD 13.7IN. M-LOK BLACK
AR-15 HANDGUARDS M-LOK 5.56MM

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£309.90 * £259.90 - £324.90*

Handguards & Rails

The AR-15 Handguards M-LOK 5.56mm from Forward Controls Design LLC is a free float handguard made of 6000 series extruded aluminum, with a full-length 1913 rail at 12 o'clock and MLOK at 3, 6, and 9 o'clock. It comes in five lengths, with the 13.7-inch version weighing 10.9oz.
The RHF handguard incorporates anti-rotation tabs and barrel cooling vents with a classic round shape. The barrel nut is machined from 7075 aluminum and both it and the handguard are Type 3 anodized. The rail mounting hardware is machined from 17-4 PH, and the barrel nut wrench is included.
The RHF handguard is compatible with most low-profile gas blocks, and its barrel nut torque is milspec 40-70ft/lbs. The rail clamp screws torque is 45 inc/lbs. This handguard is stylish with a black color and M-LOK style, making it a great choice for your AR-15.

FORWARD CONTROLS DESIGN LLC P320 OPTIC PLATFORM - COMMERICAL M17/M18, SIG P320 X5 LEGION
P320 OPTIC PLATFORM- COMMERCIAL M17/M18, SIG P320 X5 LEGION

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse

£109.90 *

Mounting Hardware

The OPF-P320, RMR, RSD is a drop-in adapter for Trijicon RMR sights, machined in 4140 steel, and melonite coated for durability. It is designed and made in the USA by Forward Controls Design and Tangodown collaboration.
The package includes two 4-40x3/16 Allen screws, a 3/32 Allen key, two T10 5-32x3/8 screws, and a packet of VC-3. Torque values: Plate to slide: 6 in·lb; Sight to plate: 12 in·lb.
The OPF-P320, RMR, RSD is compatible with Holosun 507c, 508T, and 509T (with the adapter plate it comes with), but Forward Controls Design does not guarantee fit and function for these sights on OPF-P320, RMR, RSD.

FORWARD CONTROLS DESIGN LLC AR-15 BUFFER RETAINER STAINLESS STEEL
AR-15 BUFFER RETAINER STAINLESS STEEL

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
More than 10 pieces in USA warehouse

£16.90 *

The AR-15 Buffer Retainer from Forward Controls Design LLC is a strengthened buffer retainer that features a reinforced tip that is 10% larger than TDP spec. It is compatible with AR15/M16 mil-spec rifle and carbine receiver extensions, as well as Vltor A5 system receiver extensions.
The buffer retainer is machined with Swiss machines from 17-4 stainless steel bar stock, and heat treated to H900 hardness. It is designed to be installed per TM instructions and retains the TDP buffer retainer's versatile round tip.
It is important to note that RBF isn't a fix for out of spec lowers with incorrectly positioned buffer retainer hole and it is advisable to warranty exchange your lower receiver if you detect excessive wear marks on the buffer's front face. Receiver extensions (REs) timing on the receiver can vary and different REs have different timing values.

FORWARD CONTROLS DESIGN LLC LEUPOLD DELTAPOINT PRO FOOTPRINT FOR GLOCK MOS
OPTIC PLATFORM FOR GLOCK® MOS

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£94.90 * £94.90 - £99.90*

Mounting Hardware

OPF-G, RMR is an optics platform designed to mount Trijicon RMR or SRO on Glock Gen 4 and Gen 5 slides, G17, G19, G34, G35, G41, and G40 that uses Set 02.
OPF-G, RMR is wider than Glock's OEM MOS plate to fully support the RMR, and it is compatible with all MOS equipped Glock slides.
OPF-G, RMR is designed to offer a uniform sight height, ease of installation, parts commonality, and availability, and it is proudly designed and made in the USA.

FORWARD CONTROLS DESIGN LLC SEMI AUTO AMBI 90 DEGREE SELECTOR WITH STANDARD LEVERS
AR-15 AMBI SAFETY SELECTOR

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£114.90 *

Safeties

ASF-90 is a semi-auto ambidextrous safety selector designed for defense/duty/combat use with standard levers and tight tolerances to minimize wobble between the lever and center.
The serrated levers are profiled to conform to the angle of the thumb's pad and have a single dimple on both sides to function as a position indicator. ASF is shipped with a selector spring, a KNS nitrided selector detent, two levers, and 4 roll pins.
ASF is a collaboration with Sons of Liberty Gunworks and is made in the USA. It is a conventional 90-degree selector with a strong lever to center interface via a stainless steel roll pin and is billet machined in 8620 and heat treated and black nitrided.

FORWARD CONTROLS DESIGN LLC TDP SPEC EJECTION PORT COVER, SINGLE DIMPLE, ODG
EJECTION PORT COVER WITH SINGLE DIMPLE

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse

£79.90 *

Ejection Port Covers

The Ejection Port Cover (EPC) from Forward Controls Design LLC is a billet machined product made from 7075 aluminum and hard coat Type III anodized, which incorporates features that many will find useful.
The EPC has two tabs flanking the cutout for the port cover spring, which allows the EPC to rest on the upper at a greater angle when it's in the down/open position, providing more space between the port cover and lower receiver. This feature better allows the user's finger to get underneath the port cover when he wishes to swing it up/close.
Another feature of the EPC is a shallow circular depression on the side of the product to provide texture tactile feedback to the user's finger when he's closing the EPC. The exterior surface of the EPC is treated as a control surface, where a flat surface rarely makes sense, and is compatible with TDP spec upper receivers.

FORWARD CONTROLS DESIGN LLC QD SLING SWIVEL MOUNT M-LOK
QD SLING SWIVEL MOUNT M-LOK

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£48.90 *

Tactical Sling Mounts

The QD Sling Swivel Mount M-LOK from Forward Controls Design LLC is a heavy-duty, billet machined, black nitrided sling adapter with a tensile strength of 95,000psi.
It is designed to be durable rather than lightweight, and is therefore heavier than aluminum sling adapters, but offers better durability and strength.
The QD swivel socket is rotation limited, and M-LOK mounting hardware is included. It is proudly made in the USA and is a low-profile, M-LOK compatible sling adapter for QD sling swivels.

FORWARD CONTROLS DESIGN LLC SLING ADAPTER END PLATE, HVY, 1 SOCKET PHOS BLK
SLING ADAPTER END PLATE, HVY, 1 SOCKET DLC BLACK

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£64.90 * £64.90 - £74.90*

Tactical Sling Mounts

ESF-H1 is a heavy, drop-in end plate replacement for the AR platform with rotation limited side facing sockets.
It is available in 4140 steel, DLC, or phosphate coated versions and has a rear-facing socket with no limiters.
Users may need a 2 lug castle nut wrench to torque the castle nut properly and ESF's receiver extension indexing tab can be tight on some receiver extensions.

FORWARD CONTROLS DESIGN LLC .308 AR RECEIVER EXTENSION
308 AR RECEIVER EXTENSION

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
2 pcs. in the USA warehouse

£94.90 *

Buffer Tubes

RE5F is a 9 position 308 AR compatible receiver extension made from impact extruded 7075 aluminum with rolled threads and extra drain holes to better and more quickly drain water inside the RE.
It is compatible with 308 ARs and Vltor's A5 system, and for AR15/M16 applications, it must use Vltor A5 or A5 compatible buffers, rifle length recoil springs (Vltor's A5 spring or Sprinco's Green spring).
RE5F is a collaboration with SOLGW and Forward Controls had contributed design input, making it a sensible, ergonomic, and functional receiver extension, not just for show.

FORWARD CONTROLS DESIGN LLC AR-15 BILLET CASTLE NUT BURNT FLAT DARK EARTH
AR-15 BILLET CASTLE NUT

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
3 pcs. in the USA warehouse

£36.90 * £29.90 - £38.90*

Buffer Tube Hardware

The AR-15 Billet Castle Nut from Forward Controls Design LLC is an improved version of the TDP spec castle nut, with longer and deeper staking notches and coarse serrations on the wrench side for better grip.
The CNF is billet machined in 4140 PH steel and black nitrided, ensuring durability and longevity. It is available in black, burnt bronze, FDE, and OD green colors.
This castle nut is proudly made in the USA and is a must-have for anyone looking for a reliable and robust fastener for their AR-15.

FORWARD CONTROLS DESIGN LLC MILSPEC M17/M18 OPTIC MOUNTING PLATE, REAR SIGHT DOVETAIL
M17/M18 OPTIC MOUNTING PLATE WITH RSD

FORWARD CONTROLS DESIGN LLC

In stock Delivery time approx. 7-14 days.
1 pcs. in the USA warehouse

£109.90 *

Mounting Hardware

OPF-M17, ACRO, RSD is a precision machined mounting plate made from 4140 steel, and QPQ coated that adheres to Aimpoint ACRO TDP with tight tolerances.
It is compatible with MIL issued M17/M18 and is a drop-in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03 and compatible with P320 X-Five Legion, Legion Carry, and DP Cut.
OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm, a T20 key, and a packet of VC-3. It is proudly designed and made in the USA and is ideal for professional users who require high-quality mounting hardware.

Show 15 more results (Page 2)

1 - 15 of 52 results

Page: 1 2 3 4 < >

Categories
Restrict search
- Make
- Model
- Colour
- Finish
- Fits / Used For
- Height
- Length
  - 1.57 (3)
  - 11.5 (1)
  - 12.7'' (1)
  - 13.7 (1)
  - 15 (1)
  - 3.14 (3)
  - 3.2 (1)
  - 4.7 (1)
  - 6.7 (1)
  - 9.5 (1)
  - View More View Less
- Material
- Special Filters
  - Made in USA (108)
- Style
- Type
  - Free Float (5)
  - M-LOK (6)
- Weight
- Width
  - 1'' (5)
- Price
  - -
- Stock status
  - In Stock (Brownells UK) (1)
  - In Stock (Brownells USA) (66)

E-mail address / User name

Password

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Facebook
Youtube
Linkedin
Instagram

Site Navigation

Schematics
Manufacturer
Sales
Store Front
Best Sellers
New Products

Product Categories

Firearms
Rifle Parts
Handgun Parts
Shotgun Parts
Magazines
Reloading

Shooting Accessories
Gunsmith Tools
Optics & Mounting
Gun Cleaning & Chemicals
Emergency & Survival Gear

Ordering

Schematics
Shopping cart
Delivery information
Your local dealer
Returns

Customer Service

Contact Us
Privacy policy
Terms and Conditions

Contact Information
Guaranteed. Forever.
Get More With Brownells

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations:

Prices inclusive of duty & VAT.

Classical view

Mobile view