United Kingdom
TRUE NORTH CONCEPTS
MODULAR HOLSTER ADAPTERS
109.9
109.9
2
GBP
Product no.: 100040992
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER EARTH BROWN
Mfr Part: MHA02 850005392958 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER EARTH BROWN
Mfr Part: MHA02 850005392958 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
Specs:
Color: Earth Brown
Product no.: 100040991
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER BLACK
Mfr Part: MHA01 850005392941 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
TRUE NORTH CONCEPTS MODULAR HOLSTER ADAPTER BLACK
Mfr Part: MHA01 850005392941 The Modular Holster Adapter was specifically designed to eliminate the unwanted movement, flex and sliding common to factory polymer belt adapters. The Modular Holster Adapter is made from rugged, non-ferrous DFARS grade 6061-T6 aluminum and is Type 3 MIL-SPEC hard coat anodized. It supports the popular “Mid-ride” mode of carry to lower the pistol below the shooters belt line, allowing their holster system to clear body armor and pouches. This adapter fits all “three hole” pattern Safariland™ type holsters, and other brands of holster that that use this proven method of attachment. It also supports the use of many commonly used quick detach holster systems such as the QLS, MLS, ELS, and others. Holsters mounted to the Modular Holster Adapter will accommodate 10° of forward cant and 10° of negative cant for a total range of 20° degrees. The adapter holds three height mounting points, set 1/2″ apart, descending from the top mid-ride mounting point. Rigidity is key: The adapter includes belt mounting bars which are sized and spaced for use on MOLLE type battle belts, by threading each bar through the belts PALS webbing. This application works extremely well on narrow, minimalist type battle belts such as those from Ronin or Tyr Tactical. Alternatively, these mounting bars can also be directly bolted to any standard gun belt up to 2 ¼”wide. When properly installed on your gun belt, the adapter will not move. All unwanted movement, slipping and sliding has been removed from your system. The Modular Holster Adapter includes top mounting points for using a wide array of popular quick release belt mounts such as the Tek-Lok™ and polymer MOLLE type hardware. Each Modular Holster Adapter comes with a complete hardware kit of various sized screws, posts, spacers and threadlocker for mounting. The adapter is available in Black and Dark Earth anodized finishes.
Specs:
Color: Black
🔒 Enhance your carry with the True North Concepts Modular Holster Adapter in Earth Brown! Eliminate unwanted movement & enjoy a secure fit. Learn more! 🌟
Customer Promise
Our promise to you
The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.
If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.
Trade Associations:
Welcome!
Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!
If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.
Your Brownells UK Team
Trade Associations:
*
Prices inclusive of duty & VAT.
© 2024 Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories
Classical view
Mobile view
Newsletter