Your basket is empty.

Basket

01788 815115

Newsletter

RIMFIRE GUNWORKS
CHANNEL LINER TOOL for GLOCK®

777100017

Description
Ratings (4)

Removes & Installs The Liner, Without Slide Damage

The same tool used at the Glock Factory to accurately remove and install the firing pin channel liner. This disposable part, inside the slide, must be removed and a new one installed, when rebluing or refinishing Glock Slides. Easy-to-use tool will not damage or mark the slide. Includes complete instructions, a thread protector, plus one channel liner.

SPECS: Steel, blue. 6" (15cm) long. Fits all models of Glock pistols.

More...

Customer ratings for RIMFIRE GUNWORKS CHANNEL LINER TOOL

Number of ratings: 4
From brownells.com: 4
Average rating: 4.5

Handy tool, makes the job easier (15/09/2009)

Handy tool for removing the channel liner. Simple design and simple function. However, it ruins the old one and it must be replaced with a new one every time. Better than digging it out with a screwdriver or other improvised tool.

Excellent channel liner tool! (01/01/2018)

Excellent quality and precision made with an exact fit. This works great for installing and removing the liner. Most other tools just install the liner...to remove the liner, you would need a lag bolt or some other tool which could scratch or damage the slide.

Slick Tool (07/03/2018)

This is a brilliantly designed, easy-to-use tool, but the designer made one bad assumption about removing the channel liner. He/she assumed that the channel liner would be intact. In all fairness, so would have I. However, if a sufficient portion of the channel liner is missing, then the tool "bottoms out" without making contact with the liner. The threaded portion of the tool should be extended all the way up to as close to the crosspin as possible; it doesn't even have to be threaded the entire way, just made the same diameter as the firing pin channel.

The second "flaw" (for lack of a better word) is that when installing the channel liner, if you want to tap on the tool you'll be making direct contact with the threads on the removal side of the tool. There could have been a striking surface manufactured into the tip of the threaded portion for that purpose. Use a leather mallet or similar and take care to protect the threads, because it's the leading threads--the ones you're pounding on--that dig into the channel liner for removal.

Now with all that said, this is a really slick tool, and as I already said, brilliantly designed. That is evident by the wing nut & non-marring plastic washer that is used to initially dislodge the channel liner, and the crosspin to give you a good yanking grip. It's kind of a shame that it only has one specific use (and something you'll do rarely at that, unless maybe you're a professional refinisher), but it is THE right tool for the job.

No design flaw after all (08/03/2018)

I would like to rescind my earlier review of this product. It turns out that the reason the tool was bottoming out is because there wasn't any channel liner installed in the slide at all. I assumed there was because I couldn't get the new channel liner installed, as if it was being blocked by something. The slide is at fault here, not the tool (by the way, it's a 3rd-party slide, not OEM). So the only design flaw this tool has is that you have to tap on the threads in order to install the channel liner. It's a real simple tool to use, and it works well. By the way, another reviewer complained that the tool damaged the channel liner when removing it. There's only two reasons (that I can think of) why you'd ever want to remove the channel liner. First, it's damaged and needs to be replaced. In that case, what does it matter if the tool damages an already-damaged channel liner? Second, you're refinishing the slide and the liner has to be removed before doing so. If you're investing all the time and expense to refinish a gun--assuming it's a real finish and not spray paint :-)--I think you can afford an extra three-and-a-half bucks or less for a new channel liner. It's just a part of the total refinishing cost.

Read 4 more ratings on brownells.com

49.9 49.9 1 GBP

Product no.: 777100017
RIMFIRE GUNWORKS CHANNEL LINER TOOL
Mfr Part: G1 The same tool used at the Glock Factory to accurately remove and install the firing pin channel liner. This disposable part, inside the slide, must be removed and a new one installed, when rebluing or refinishing Glock Slides. Easy-to-use tool will not damage or mark the slide. Includes complete instructions, a thread protector, plus one channel liner.

49.9 GBP 0 £49.90 *

Backordered, delivery time approx. 4-12 weeks from the USA warehouse.

Specs: Make: Glock Model: Universal Handguns

Add to shopping list

Ask question

Details

Add to shopping list

Ask question

Top takeaways

The CHANNEL LINER TOOL is designed for the removal and installation of the firing pin channel liner in Glock pistols.
It is the same tool used at the Glock Factory, ensuring professional results without damaging the slide.
The tool comes with complete instructions, a thread protector, and one channel liner, and is compatible with all Glock models.

Attributes

Make: Glock Model: Universal Handguns Delivery weight: 0.068kg

Item details

Made in USA

🔧 Get your Glock looking and performing like new with the Rimfire Gunworks CHANNEL LINER TOOL! Easy installation, no slide damage. Shop now for factory precision! 🔫

Description
Ratings (4)

Removes & Installs The Liner, Without Slide Damage

SPECS: Steel, blue. 6" (15cm) long. Fits all models of Glock pistols.

More...

Customer ratings for RIMFIRE GUNWORKS CHANNEL LINER TOOL

Number of ratings: 4
From brownells.com: 4
Average rating: 4.5

Handy tool, makes the job easier (15/09/2009)

Excellent channel liner tool! (01/01/2018)

Slick Tool (07/03/2018)

No design flaw after all (08/03/2018)

Read 4 more ratings on brownells.com

Customers also bought

BROWNELLS MAGAZINE TOOL FOR GLOCK
MAGAZINE TOOL for GLOCK®

BROWNELLS

In stock

£32.90 *

Magazine Tools

2.6

BROWNELLS SCREWDRIVER SET FOR GLOCK
PISTOL SCREWDRIVER SETS for GLOCK®

BROWNELLS

Reordered

£39.90 * £24.90 - £39.90*

Magna-Tip Bit Sets | Magna-Tip Sets

🔩 Upgrade your Glock with precision-made FRONT SIGHT SCREWS from WARREN TACTICAL! 🎯 Durable stainless steel, perfect fit for aftermarket sights. Get your 2-pack now! 🔧

WARREN TACTICAL SERIES FRONT SIGHT SCREWS FOR GLOCK®, 2-PACK
FRONT SIGHT SCREWS for GLOCK®

WARREN TACTICAL SERIES

Not available

Sight Screws

SPRINGER PRECISION CARRY/DUTY EZ SLIDE RACKER FOR XD/XDM
EZ SLIDE RACKER

SPRINGER PRECISION

Not available

Slide Rackers

3.3

LAW TACTICAL AR-15/M16 GEN3-M FOLDING STOCK ADAPTER
AR-15/M16 GEN3-M FOLDING STOCK ADAPTER

LAW TACTICAL

In stock

£334.90 * £334.90 - £339.90*

Adapter

4.3

Forgot your password?
Register

Customer Promise

Our promise to you

The Brownells.co.uk Promise To Our Customers: Your satisfaction is GUARANTEED - Period.

If you aren’t completely, 100% satisfied with any item you purchased from us for any reason return it for a refund or exchange.

Trade Associations:

Connect

Site Navigation

Product Categories

Ordering

Customer Service

Welcome!

Welcome to brownells.co.uk, the leading supplier of Firearm Accessories, Gun Parts and Gunsmithing Tools in the UK!

If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! For over 75 years, shooting sports enthusiasts have turned to Brownells.co.uk for high-quality gun parts and supplies they need. You’ll find over 90,000 products including unique gun parts, accessories, gunsmithing tools, ammunition and other products to maintain, repair, and upgrade your guns.

Your Brownells UK Team

Trade Associations: